How to properly serve inflatable pool so that the water in it always remains clean and transparent

The inflatable pool brings a lot of joy in summer. This is a great pastime on hot sunny days. Both adults and children love to swim and play in the pool. But it is very important to monitor the purity of water, disinfect and change water in time. Because the health of your entire family depends on it.

How to properly maintain the pool so that the water in it always remains clean and safe?

1. Timely replacement of water.

In inflatable pools of large volumes, the water should be changed every 3-4 weeks. This is provided that you use all the necessary means to prevent the development of microorganisms, fungi and algae. As for children's pools, the leading manufacturers "Intex" and "Bestway" recommend that kids change the water daily. Older children can change the water once a week, but this will require the use of disinfectants.

2. Physical water treatment

Large debris that is brought into the pool by the wind must be caught with a net (for example, leaves, branches). To remove small debris, it is best to use a skimmer, into which the top most contaminated layer of water will merge. In addition, it is necessary, with each change of water, to clean the inner walls and bottom of the pool, as plaque forms on them. It can be wiped with a cloth, brush or mop.

On sale there are special kits for cleaning the pool, which include:

· Skimmer;

· Telescopic handle.

You can also use a special vacuum cleaner for cleaning pools for this purpose. This will make it much easier for you to wash the container.

3. Chemical treatment of the pool

Adding chemicals is indispensable, because water is the habitat of many microorganisms, fungi and algae.

Disinfection is carried out with special means, which include chlorine, bromine or active oxygen. All of them are effective in the fight against bacteria and fungi, but they act differently on human skin. Chlorine-containing products dry out the skin and mucous membranes, cause allergic reactions. Means with active oxygen are absolutely safe, therefore they are recommended for use in children's pools.

Disinfectors must be added to the water every week, and the walls of the pool must be cleaned at each water change.

Often the water in the pool begins to turn green, and mucus forms on the walls. This is about algae growth. Swimming in such water is extremely unpleasant. To avoid their development, the pool must be treated with an algaecide. This substance quickly eliminates algae and prevents them from multiplying.

4. pH control

Acid-base balance must be monitored several times a week. Normally, the pH should be in the range of 7.2 - 7.6. If this value rises, then the water becomes hard, irritation of the mucous membranes appears and the effectiveness of chemistry decreases. In the case of a low pH, disinfectants lose their effectiveness, and the skin and mucous membranes begin to react sharply to acidification of the water. Therefore, it is necessary to use means that can normalize this indicator.

If you put a swimming pool outside the city, it turns out very quickly that it is very difficult to keep the water fresh in it, to protect it from greenery!

Nothing is done to the water in the pool for a week and a half, and then the water usually deteriorates, spider bugs start up, although it remains more or less transparent for another week, after all, it is no longer very fresh. You can chlorinate, but, according to reviews, even water chlorination does not really save water from spoiling.

You can salt the water - excellent water is obtained if about 50 kg of salt and 5 kg of soda are poured into 10 tons of water - it even tastes slightly salty. What is good about salting water is that midges do not start up in it, mosquitoes do not breed, and birds do not flock. This is an excellent tool, the only drawback is that you need to carry salt.

Well, salt and soda do not save water from greening, other means are also needed. Especially in the heat.

A septic tank is a must - it helps to protect water from greenery longer.

In summer, in the heat without disinfectants, even with a filter, the water in the pool deteriorates in a matter of days. Chemistry should be chosen based on the characteristics of water.

Sodium chloride (that is, simple salt) does not chlorinate water. Need free chlorine(because we feel the smell from tap water), and constantly, because. he is flying. Chlorine generators, subject to the addition of salt to the pool, just work in such a way that they release chlorine, converting it into volatile substances - it maintains the water in the pool.

Awnings are good, but every day, if it's hot, covering the pool is not an easy task. The awning can be used if the weather is cold and there will be a break from swimming. Or if you're leaving.

In chemistry - you can work with water according to the following plan:

1) equalize the p / h balance - for example, about 8 is high, you need 7.4

2) we put a tablet in the pump - a long chlorine tablet, the cartridge in the filter is changed every 2-3 weeks

3) once a week or two at night - a tablet of quick chlorine in the water.

4) it is necessary to regularly measure the p / h level - this is the first, if the level does not jump, water can be stored much longer.

Some use hydrogen peroxide: a 10 liter tank is enough for the whole summer for a pool of about 20 tons of water. Peroxide is added to the water once a month. We work with gloves, because this is a highly concentrated liquid, and most importantly - do not pour it into one place in plastic pools, otherwise it can corrode, and do not pour it onto the sides of the pool. You can swim within a day. You need to pour 0.5-0.7 kg per ton of water, and it is sold in canisters of 34 liters, about 1000 rubles each. for the canister. Perhydrol is a sea of ​​oxygen, do not smoke while working! Do not immediately pour the entire volume from the canister into the pool, as the perhydrol that has not had time to dissolve can fall to the bottom and as a result you will get a white spot on the bottom. We turn on the filtration of the pool on the second day after pouring the peroxide - oxygen begins to foam in the water from the jet of pumping water.

IMPORTANT - clean the bottom, you need a vacuum cleaner, otherwise it starts to bloom from the bottom.

The water in the pool theoretically should not change during the season, if the conditions for chlorination and the p / h level are met, only add fresh water to replace the evaporated one. That is, water is poured into the pool once a season before it starts and drained in the spring before changing the water. For the winter, a special reagent is added to the water, compressors (you can use ordinary plastic bottles from under the water), and the water is safely frozen in the winter in the pool, he himself is covered with a blanket.

Water in the autumn before winter cannot be completely drained so that the soil under the pool does not leave with the spring melting of snow, otherwise you will have to tamp and level the base under the pool again. So you need to take into account the possibilities of care and maintenance of the pool, not only in summer, but also in the "sleeping" season.

Pool chemicals

In fact, for the pool you only need three chemicals:

1. Softener (or vice versa) - depends on p / h, only a special container and tablets are needed to measure. If you do not bring the p / h level to the required 7.2-7.4 in terms of hardness, then the next two chemicals will need to be added much more, so the first is to bring the water to the required hardness-softness.
2. Desalgin - from flowering.
3. Chlorine tablets or powder (some different types and names).

Everything else is essentially optional and will not give a clear effect. So remember - only two chemicals - desalgin and chlorine tablets, and bringing water hardness to normal, and that's it. It is not difficult to master this procedure and it is enough to add chemistry once a week. Unless of course you filter the pool, if not, then put a filter, this will improve the situation.

The higher the temperature of the water, the stronger the processes are going on in it, you need to watch it more carefully in the heat, add chemistry more often.

Another option to maintain clean water in the pool:

1. Quickfloc Super Coagulant. Liquid product for removing cloudy water in the pool.

2. Calcinex Pool (hardness stabilizer).

Before the first set of water, it would be good to treat the walls of the pool with dezalgin. This is when the pool starts in the summer. Then we add 60-65 kg of ordinary table salt per 20 tons of water, and .... until September, the water is clean, no need to change!

It is desirable to pump 2-3 volumes of pool water per day with a filter, you need to look at the pool volume and filter performance.

Is it possible to drain chlorinated salt water from the pool under trees and shrubs?

This is the problem of small areas - where to drain 15 tons of chlorinated water with salt?

Rains will lower the concentration of salts, but the soil will take your salts to itself. And with a decrease in the supply of moisture, the concentration of salt in the soil will increase. Over time, chlorine as a negatively charged ion will be partially washed out. It must be borne in mind that the concentration of salts in soil moisture should not exceed 2 g / l. From here come recommendations for plant nutrition (20 grams of fertilizer per bucket of water). At a higher concentration, the plants are oppressed.

In the water of the pool in which the chlorine generator worked, on average 50,000 grams / 15,000 liters, this is 3.3 g / l. Too much for plants, almost 2 times higher than normal. It is better to drain not under trees and bushes, but away from them. This water is used for watering lawns. But although this is not very small, for one-time lump sum reset is not critical. It all depends on how much snow there will be and how rainy the autumn-spring will be. For autumn and winter, everything should be washed well.

Alkali is needed to neutralize the salt, i.e. like soda.

Salt concentration with sea ​​water- an average of 24 g per liter, i.e. 24 kg of salt per ton of water, so 50 kg dissolved in 15 tons of water is such a minuscule compared to sea water, which is not even serious.

The main nutrients for plants are POTASSIUM, NITROGEN, PHOSPHORUS, CALCIUM. Neither sodium nor chlorine is included in this list. Chlorine is a poison for most vegetable plants. The active part of potassium chloride and potassium salt is potassium. The same with sodium humate. Humic acids are a useful component, sodium is a useless appendage that allows you to introduce a useful part of the fertilizer.

Chlorophobic plants that react negatively to an increased content of chlorine in the soil include tobacco, grapes, pumpkins, beans, potatoes, tomatoes, fruit and berry crops. In tree species, the toxic effect of chlorine is manifested only at high concentrations of chlorine in the nutrient solution, while in gooseberries, red currants and strawberries, its negative effect is already manifested at low concentrations.

In fact, if you act completely according to the rules, pouring such an amount of water (15-20 tons) once onto the ground even without salt is not very useful and is not recommended. Excess moisture, seeping through the fertile layer, takes nutrients out of it. It is harmful to moisten the soil beyond its full capacity. The reason for salinization of soils is precisely in excessive irrigation.

The safest and most environmentally friendly way is to drain the pool into a filter well or underground filter field. It is impossible to drain such concentrations onto the ground (into a ditch) or into a reservoir (the excess of the MPC for chlorides is almost 10-fold (no more than 350 g / m3)). But on the field of underground filtration or in the filtering well - you can.

If the soil is sandy or sandy, then to drain, simply dig a hole a meter and a half deep and dig a well-perforated barrel into it, half filled with rubble inside, outside around the barrel to a depth of half a meter, also fill it with rubble and close over the rubble with roofing material, old linoleum, etc. etc., then with earth (do not forget to remove the pipe from the center of the barrel).

For a day, the pool cannot be poured into a barrel - everything will pop up. But slowly, in 1-2 weeks, the water will slowly merge. Maybe faster - it all depends on the soil. If you drain once a season - this is normal. But there will be no harm to plants, and do not spoil the soil, and it will be possible to drain water from the shower there.

pool chlorine generator

The application technology is very simple: on the example of a pool 6x3 m. According to the instructions of the chlorine generator, salt is poured into the pool in the amount of 50 kg. The filter-chlorine generator for chlorine generation is turned on - free chlorine is obtained (according to the instructions).

The filter-chlorine generator has parallel plates through which water from the pool passes. Voltage is applied to these plates. It turns out electrolysis - the output is free chlorine and scale (white flakes, like on the heating element of the kettle), but not much - the smell of chlorine is not felt, but the turbid water, which leaves green-brown mucus on the filter, becomes transparent and the filter clogs less.

Salt is not consumed in this process.

An example of such a chlorine generator is the Intex Saltwater System 54612.

Since electrolysis and chlorination are not healthy, it is natural to bathe when the chlorine generator is not working. This is how (at night) the water in the pools in the hotels is treated, so it is forbidden to swim there at night.

The water in the pool when using the chlorine generator tastes slightly salty, but very far from the sea.

If the water became very cloudy - turned on the chlorine generator - it became transparent.

Inflatable shallow pools

Game Pool Bestway Star Wars, only 276 liters, you can change the water every day!

If you have the opportunity to constantly pour fresh water and not worry about caring for it, as an option, you can take a small inflatable pool with a slide, great for cooling in the heat.

You can’t swim in it, but you can splash around all day, splash, ride down a hill. A few days passed, the water ceased to be clean - they drained it, rubbed it, poured it clean.

It heats up instantly, and the inputs do not need too much, it pours quickly.

Smart Pool cleaning systems - no problem at all!

This is a novelty (since 2012), which generally relieves the pool of water problems: it is quite expensive, but by putting this device in the pool, you can completely forget about all chemistry and cleaning.

Smart Pool is an innovative alternative to built-in chlorine, PH, coagulant dispensers. Ecological system. Smart Pool is a compact device that ionizes the water molecules in the pool, slightly changing its charge. As a result, water molecules become antagonistic to bacteria in contact with it.

The difference from chemical disinfectants is that when using the Smart Pool device, organic substances (bacteria, algae) that enter the pool bowl do not oxidize (decompose into gases) as when using chemicals, but die off, precipitating.

The ph level is not affected. Can be used in salt water.

By real reviews, the pool has been standing for 4 weeks, the water is clean.

It is only necessary to monitor the mechanical contamination of the water and purify the water using filtration or a vacuum cleaner. Vacuum the bottom and walls of the pool in order to remove debris that falls into the pool bowl. All. Chemistry is not needed.

Designed devices for 4 seasons of use. That is, 4 years in a row your pool in the summer will not present problems.

Attention! The ball needs to be taken with some margin: not two balls of small volume (adding one to the other), but better more. Not much, but - one ball, and - more than covering the volume of your pool. That is, two balls, designed for, say, 5 cubes each, do not work when cleaning a pool of 10 cubes. For 10 cubes and take a ball for 10-20 cubic meters. pools.

Devices are different- choose depending on the volume of the pool. For example:

Cleaning system Smart Pool "Maxi" for pools ranging in size from 10 to 20 cubic meters

Diameter of this magic ball: 65mm.

Inside the spherical plastic case, with a hole in the upper hemisphere, there are active elements with silver and copper. The built-in power supply activates the water ionization system with silver and copper ions, effectively disinfects water without the use of chlorine and other chemicals.

Shelf life: 3 years.

You can use it during the entire expiration date indefinitely! It can be used both constantly (the entire period during the shelf life in stationary pools), and periodically (for example, on summer season in collapsible or inflatable pools).

Smart Pool Super 60 cleaning system for large stationary pools volume from 30 to 60 cubic meters

The advantages of the Smart Pool disinfection system: it does not allow harmful bacteria to multiply in the water, waterlines form, water blooms (algae multiply), allows you to significantly reduce the cost of chlorine and chemicals, relieve the headache associated with constant care of the pool - just place the Smart Pool to the pool and forget about all the problems associated with water disinfection for 3 years!

Does not require connection to the network, does not require consumables and maintenance!

All Smart Pool devices are compatible with any disinfectants (including ozonizers and ultraviolet units), as it is based on other principles of disinfection. The use of chemicals - bleach, hydrogen peroxide, ph + and ph-, algicidal preparations in most cases is not advisable when using SP.

Water can be used any up to the river. After a few days, it will be safe to use in the pool. But the more dirty the water, the more it will have to filter out the precipitated precipitate.

During the winter, the Smart Pool can be left inside the pool if the water in it does not freeze. Or take it out and store it in a dry place.

For the owners of country houses and cottages, it has always been a great temptation to acquire their own small, but personal reservoir. It doesn’t matter what design and principle of filling with water, the main thing is that it be your own! After all, if the pool is located near the country house, you do not need to go to the river to swim, and sunbathing with comfort is much more pleasant and more convenient on sun loungers near the house than on a bedspread on the sand. True, when deciding to buy frame pool for giving, not everyone imagines what heroic efforts it will cost to fill it with water and keep it in such a way that the water is clear all season from May to September.

Pool maintenance

Actually, the designs of the pools themselves are not much different from each other, they have the same principle - a bowl or a water tank with a drain valve. Different in shape and design, pools usually differ in whether they are located indoors or outdoors.

In many ways, it is the location in the open air that is the factor that over time in the pool the water gradually loses its transparency, the walls of the pool will become covered with a slimy coating, and after a while greenish or gray-green threads of algae will be noticeable in it and a characteristic marsh smell will be felt.

Water bloom in outdoor pools- this is an almost natural process, unlike pools located under the roof. Although here, over time, signs of deterioration in water quality begin to appear, but the process itself can drag on for a long period, however, if at the same time the water mirror of such a pool is not exposed to direct sunlight, and the water does not warm up to a high temperature.

Thus, in order to maintain the water and its biological qualities in the pool in a normal state, it is necessary to approach the issue of pool care in a comprehensive manner:

• Run correct installation of the pool regarding the location of the bowl;

• Carry out the necessary activities related to chemical water treatment - its disinfection, removal of solid particles and inclusions that enter the water, and carry out timely work to combat algae.

All these activities require a careful and thoughtful approach and the application of both standard water pollution control methods and innovative methods to maintain normal water in the pool.

Causes of blooming water in the pool

The pool, as a closed reservoir with a constant amount of water, is characterized by the simultaneous occurrence of several biological processes associated with the development of aquatic environment microorganisms for which water is a natural habitat.

In order to track the process development scheme, it is easy to imagine the sequence of those actions that take place in the open-air pool bowl:

• After the installation of the pool, when it is filled with water, the biological component of the water is revived, it is saturated with microbes, bacteria and plant cells from the surrounding nature;

• Gradually, the water in the pool heats up to a comfortable temperature of +20 ... +23 degrees Celsius, at which you can swim, however, at this temperature, microorganisms and algae begin to actively multiply;

• The process of reproduction of algae is actively supported by constant sunlight, starting the process of photosynthesis and the development of plant cells;

• A layer of deposits forms on the bottom and walls of the bowl, in which the most optimal environment for the start of the life of microorganisms;

• Even a pool covered with a film to prevent debris from entering the bowl is gradually filled with sand, dust and bacteria, accelerating the growth of algae;

• As a result, after 2-3 weeks, the water acquires a characteristic grayish and greenish hue, and after another 1-2 days, algae rise to the surface, and the water becomes green to the full depth - the pool bloomed ...

This state of affairs will be repeated almost every time if an integrated approach to the maintenance of the reservoir is not applied during the maintenance of the structure. In the process of applying a set of minimum necessary operations, it is necessary to provide for the following without fail:

• Carrying out planned disinfection of water;
• Monitoring the level of acid-base balance of water;
• The introduction of coagulants - reagents for binding insoluble particles;
• Water filtration using coarse and fine filters;
• Cleaning the bottom and walls of the pool bowl using a “water vacuum cleaner”;
• It is necessary to constantly monitor the purity of the water and, using an ordinary sap, catch fallen leaves, insects, and other small debris from the surface;
• Needs to be added to water algicides - chemical compounds that prevent the reproduction of algae in the water.

Algicides - the main weapon against water bloom

A group of chemical compounds known as algicides, has long been successfully used in the fight against algae that breed in fresh and sea water. Today, several types of these compounds are used in pool maintenance technology, the main task of which is to destroy the phenomena called water bloom.

Algicides - the main weapon to combat the blooming of water

The mechanism of operation for different systems has a slight difference:

• Prophylactic aimed at the constant use and maintenance of water in the norm due to a certain concentration of the substance in the water;

• drugs, designed for hard and fast effect, used when the first signs of flowering appear, they are used once or repeatedly for a relatively short time, acting as a huge concentration of substances in the volume of water;

According to the dynamics and which groups of biological organisms they act on, algicides can be divided into:

• Preparations of complex action- actively fight against unicellular algae, viruses, bacteria;
• Targeted drugs- the main substance of such products usually fights unicellular algae, and chlorine-containing substances are used against microbes and bacterial pollution.

In its own way, each of these drugs is good, but it should be borne in mind that when installing a pool on the street, it is an integrated approach that will have maximum effect, after all, disinfection with the help of chlorine-containing substances and active oxygen, and preparations based on bromine will greatly enhance the effect of the use of a broad-spectrum algicide.

Despite the fact that the business of caring for artificial water structures has just a huge market for offers, various household and industrial chemicals and the same number of devices to ensure cleanliness, there are still people who believe in the miraculous power of silver coins and packages of antibiotics from the first aid kit.

On the Internet, on sites dedicated to dacha topics, various forums and groups on social networks, network technologies are actively used to disperse another panacea for the blooming of water in the pool.

The most popular in this list of drugs, according to "experts" are:

• Hydrogen peroxide;
• Antibiotics of various spectrum of action and forms;
• Ordinary greenery;
• Whiteness and bleaches for fabrics;
• Silver coins and jewelry.

Such an impressive list of preparations and means of water disinfection, it seems, can solve the problem of water bloom by its very appearance, however, the effect of using these methods for the destruction of unicellular algae will be absolutely opposite .

No folk remedy can completely help with the flowering of water in the pool.

By itself, adding brilliant green or a silver spoon to the water will not solve the problem for an ordinary frame pool with a diameter of 5 meters and a volume of 21 cubic meters, even when magic spells are used.

Water blooms in the pool - what to do

First of all, when purchasing a frame pool, as the most affordable option, in addition to the equipment itself in the form of a frame and a polyethylene bowl, the set of equipment must include:

• Filtering equipment;

• Manual cleaning equipment;

• A set of test strips for monitoring the level of acid-base balance, the presence of the concentration of a disinfectant and algicide substances;

• As a means of disinfection - chlorine-containing preparations in tablets or in the form of a gel;

• coagulants;

• Broad spectrum algaecide.

This modest set of equipment and preparations for the pool will ensure the formation of a safe environment in the bowl for both humans and the surrounding plants and flora on the site.

The use of disinfectants starts from the first day when filling the bowl with water. The order of application and the sequence of application of drugs usually does not play a big role. On initial stage generally accepted disinfectants based on chlorine or active oxygen . Additives of these products make it possible to ensure the maintenance of the desired bacterial background of water, eliminating the entry into the body of the most aggressive types of bacteria that cause serious diseases.

The first dose, according to the instructions for the use of most antibacterial substances, is applied in the maximum allowable volume, which exceeds the usual prophylactic volume by 40-50% in terms of the concentration of the substance. Such a dose is necessary for guaranteed disinfection of water and the creation of a reserve of concentration of substances for further preventive maintenance of the desired level. Exceeding the concentration at the initial stage usually drops to normal after a few hours, acceptable level concentrations of substances that are safe for humans.

Re-introduction of the main disinfectant is carried out after 2-2.5 weeks. At this time, usually coagulants- means for cleaning insoluble particles. Most coagulants are in the form of tablets. Manufacturers recommend using them, not just dissolving, but hanging them by the side of the pool using special plastic protective containers to prolong the action. The thing is that the main layer of coagulant action is 15-20 cm from the water surface.

Pump equipment it is recommended to turn it on for at least 24-48 hours a week to get the real effect of water filtration. At the same time, sand quartz filters are considered the most effective filters, which provide water filtration in the most efficient way. It is recommended to replace sand once a season, but for filters made of tow or special paper, replacement should be done once a month.

The use of algaecides for the pool

The preparation of an algaecide solution should be carried out after a chemical analysis of the state of the water. With the help of test strips, water is tested to determine the acid-base balance. And with the help of reagents - to the level of concentration of disinfectants. However, in warm weather, when the average daily temperature reaches + 15-17 degrees, it is necessary to use algaecide regardless of the test results.

The main recommendation for the preparation of a concentrated solution should be the manufacturer's instructions. The prepared solution is gradually introduced in different parts of the pool for the fastest and most uniform mixing with the water in the pool.

With an increase in air temperature and water temperature in the bowl, the algaecide is re-applied after the time specified in the instructions.

The use of an algaecide in no way cancels the schedule for applying the main disinfectant and coagulants. As well as the schedule for cleaning and cleaning the bowl itself.

The correct and competent use of algicides in the complex of measures for the care of the pool will allow you to maintain health and prolong the pleasure of swimming almost until the first signs of autumn.

Pool products to keep the water from blooming

White water in the pool- this is a fairly common situation for pools in which there is no filtration system or. The very word "whitishness" tells us that we do not have crystal-clear and not transparent water, but all the signs of dispersion pollution are on the face. That is, in the muddy water of the pool there is garbage of the smallest fraction, it cannot be filtered out by the installed filter. Indeed, it often happens that the water seems to be clean, not green, it does not even have a reddish tint, but it is whitish and not transparent enough. Many do not understand what needs to be done in this situation, how to ensure that the bottom of the pool can be clearly seen through the water column.

Today, this problem can be easily eliminated - it is enough to replace the filler for yourself using a coagulant. Thanks to the coagulant, the smallest particles and various suspensions that pollute the water will combine to the size that the filter can catch. However, whitish water can have suspensions of various nature, therefore, its purification will be carried out in different ways, it is enough effective ways in order to achieve its crystal clearness. For example, rapidly multiplying microorganisms can create turbidity in the water by their presence - this is due to the fact that disinfectant measures have not been carried out well enough.

In some cases, insufficiently clear water in the bowl is due to poor filtration, for this it is necessary to replace its entire system, because it may have failed. In addition, the result of whitish water in the pool may be the appearance of various tiny particles of soil, plant pollen, dust, which are carried by the wind, or by the often splashing person himself. The filter system cannot hold such suspensions, because they safely pass through the filter along with water and fall back into the pool.

And in order to white water in the pool became more transparent, it is necessary to use flocculants and coagulants. Then the unfiltered particles that create haze will become larger, and therefore filterable. This process occurs as follows: the coagulant carefully envelops even the smallest particle of pollution with mucus, after which they stick together, forming flakes, which, in turn, settle, covering the bottom like a carpet, and some of the flakes simply float in the water column like jellyfish in the sea. Of course, all these unpleasant flakes should be collected with a pool vacuum cleaner.

If you have not properly disinfected the pool water for a long time, it is quite possible that the water becomes whitish due to the presence of organic elements. In this case, it is necessary to carry out a primary treatment of water, that is, to create a shock treatment based on active oxygen with disinfectants. Do not forget to check the pH level with a tester and adjust it if necessary. If your pool constantly contains whitish or rusty water, it means that it is not equipped with a filtration system. After all, there is no circulation and filtration in it, but warm, and even Still water is an excellent environment for habitat and reproduction of various harmful to human body microorganisms. To avoid serious diseases, install a reliable filtration system in your pool and be sure to use chemicals for.

If, nevertheless, the pool is equipped with a fairly reliable system filtration and cleaning chemicals are used in a timely manner, but the water in the bowl still remains whitish and not quite transparent, in which case it is necessary to carry out all complex maintenance activities. This does not require additional costs to pay for a special service - believe me, you can handle it yourself. And so we proceed to action: firstly, you should check the condition of the filter itself, it may be clogged and you need to rinse it thoroughly, and if the filtration is used on the basis of cartridges, then they must be replaced. Secondly, you should check the water indicators in the pool bowl, bring the pH level back to normal, after which you can again conduct an extraordinary shock treatment and you will notice how white water in the pool will become transparent.