Despite technological advances, changing pace of life and other innovations modern life, fishing in winter remains very interesting and funny occupation. True, not everyone is ready to stick their nose out into a 20 degree frost to try their luck. And if you're not lucky?.. In general, few people can call themselves a real winter fisherman. Nevertheless, such an extreme occupation finds a place in the life of some daredevils who do not pay attention to cold, frost, snow and blizzards, collect tackle and go to the reservoir for a trophy catch.

In contact with

But not everyone manages to catch a few worthy specimens, regardless of their experience, gear and lures. This is due to the fact that the choice of a place for fishing in winter is carried out blindly, so the process is seriously complicated. For this reason, more experienced representatives of a large family fishermen use underwater video cameras to winter fishing. Such a simple device performs a lot of important functions, namely:

Getting into the winter hole, the camera displays a good and high-quality picture on the external display. As a result, the fisherman can save valuable moments from the next fishing, get valuable information and replenish the fishing experience with new ones. fascinating facts.

Technological progress concerns all branches of human activity, and fishing in winter is no exception. In a short period of time, underwater cameras have become the most inalienable attribute this kind of activity, so their absence turns fishing into a waste of time. Most of these devices consist of several separate parts, namely:

• monitor;
• sealed underwater camera with backlight function;
• long waterproof cable;
• charger;

How to use the underwater camera

If you bought your first underwater video camera, then a good catch is guaranteed. Even if the fish is away from your gear, most likely? soon you will be able to catch it. Before as start using the device Be sure to read the user manual and user manual.

And although the underwater camera market is represented by a wide variety of devices, the basic principles of their operation remain the same. To start exploring the reservoir, in addition to buying a camera, you will have to find a cable to carry out the descent and further rise of the tracking device back up.

The sequence of actions is as follows:

Controlling an underwater video camera with your own hands is not as difficult as it seems at first glance. Enough follow some advice and correctly evaluate a number of features of a successful fishing:

• It is known that big fish prefers snags, relief changes and irregularities;
• first diving involves lowering the camera up to a mark of 10-15 centimeters above the bottom;
• try to stop the dive in time and prevent the video camera from hitting the bottom of the reservoir or colliding with obstacles. Otherwise, it may cause damage.

Criteria for choosing a good ice fishing camera

An underwater video camera is a very important household item for anglers. When buying a camera for shooting video underwater, pay attention to the presence of infrared illumination, which provides the ability to shoot in pitch darkness. In addition, it is important to take into account a lot of other subtleties, including:

Overview of popular models

Despite the fact that the camcorder has become available on the domestic market relatively recently, today you can find a wide variety of models similar equipment, so choosing the right option will be much easier. If you make a rating that includes the best devices with the best value for money, they will look like this.

Available Models

If the main criterion for choosing a video camera is price, then you should pay attention to the available models. There are plenty of them on the market today. And although in some areas they can be limited (as a rule, we are talking about the depth of immersion and image quality), such devices perform the main task quite well.

If you intend to buy a budget camera for shooting video underwater, pay attention to the following models. They are recommended by experienced specialists and experienced anglers who love to fish in the winter cold. A good helper for a beginner winter fishing enthusiast can be Camera Color One. Despite the small weight, excellent ergonomics and the cost of $100, it allows you to view the situation under water in good resolution.

The model competes with budget developments from Hong Kong called Chinavasion. The LQ-3501 model has proven itself well, costing from seven and a half thousand rubles. You can buy the product in many fishing stores or at an aliexpress auction.

If you are in doubt about your choice, be sure to check the reviews of real users and do not hesitate to consult with experienced fishermen.

DIY underwater cameras for winter fishing

While a good ice camcorder is not cheap, many experienced fishermen are willing to pay any price to buy a device, while others prefer a more affordable alternative. They are able to find a way out of the most hopeless situation, so they manage to create underwater cameras for winter fishing with their own hands.

As these guys say, create a camera at home no master skills and sophisticated technology is quite real. The main thing is to find the right components and configure them correctly. Of the necessary things should be highlighted:

Before carrying out the procedure, it is important to correctly consider the choice of some individual components, taking into account such features:

Following step by step instructions making a camera, you can build a functional device without much difficulty.

Before proceeding with the upcoming procedure, check a small TV or other external monitor compatible with camcorder. The device must reproduce the picture in real time, without any distortion or other problems. Also make sure that the camera is working smoothly and the display quality remains high.

In this case, the camera for winter fishing will be made in a short time.

Any angler, both beginner and experienced, seeks to quickly find a place where a large number of large fish are found. In such searches, technology helps a lot: a few years ago, echo sounders were actively used, but they had a significant number of errors. Today they are being replaced by underwater cameras specifically for fishing, and the process itself becomes much more interesting. Thanks to this equipment, you can observe what exactly is happening under water in real time.

We've compiled this list of the best underwater fishing cameras based on customer reviews, features and availability. additional equipment. The rating presents the most famous models of this year.

Top 10 underwater video cameras for fishing

This is one of the latest models equipped with a recording function. It allows you to control everything that happens in the water column. The fisherman will observe the habits of fish, analyze their actions. Videos are stored on a micro-SD memory card, they can later be reviewed on a computer or smartphone. It is equipped with a 20 m cable, which allows it to be used even in deep lakes and rivers. The design provides for several infrared LEDs, the radiation of which the fish does not see. They provide clear images at any time of the day, even in muddy water. There is a front-facing camera and a 4.3-inch display, equipped with a protective visor that protects against glare in bright sunlight. The interface is quite simple, completely in Russian. The camera is mounted on the rod using a convenient bracket with a swivel mechanism, it runs on batteries for up to 5 hours.

Advantages:

• Acceptable price;
• Reliable wire;
• Compact dimensions;
• Insignificant mass;
• infrared illumination;
• Ability to adjust the position of the camera;
• Wide angle lens.

Flaws:

• Batteries are installed behind the cover;
• The front camera quickly fails;
• The display case is not waterproof.

Quite a practical model that is perfect for any reservoirs. It is excellent value for money and has great features that make it easy to track the habits of fish. The cable is additionally reinforced with Kevlar thread, 30 meters long. The camera is equipped with 12 infrared LEDs, which provide good illumination in the water column and do not scare away the fish. Thanks to such a camera, you can easily see everything that happens in the thickets of grass or in deep areas, calculate the depth of the reservoir, determine how the fish reacts to a particular bait, and not miss a bite.

The camera can operate at ambient temperatures from -20 to +60 degrees, which makes it suitable for winter fishing. It has high sensitivity, a clear picture is displayed on the display - its diagonal is 7 inches, if desired, it can be rotated in any direction.

Data transfer from the camera to the display occurs at a high speed, which does not allow even the slightest interference. The display also has a sun visor. The viewing angle of the camera is great - 92 degrees. It is placed in a waterproof housing made of aluminum alloys and shaped like a small fish. The device runs on a lithium battery, when fully charged, it can work up to 5 hours without interruption.

Advantages:

• Included is a 2 GB micro-SD memory card, supports cards up to 32 GB;
• You can use it in the thickness of the reservoir and at its bottom;
• Can record video;
• Wide operating temperature range;
• Capacious battery.

Flaws:

• High price;
• The fish can take the camera for bait - it cannot damage it, but certain problems may arise.

It allows not only to track the location of the fish, but also to choose the most suitable tackle and bait for catching trophy specimens. In real time, you will be able to see exactly where the fish is and what it reacts to. The fisherman will be able to quickly respond to a bite and slightly tweak his actions.

The design provides 8 infrared LEDs, the camera resolution is about 2 megapixels with a viewing angle of 120 degrees - this allows you to view a large area of ​​the reservoir. It can be used in winter period even for ice fishing - the camera will track not only what is happening under the hole itself, but also at a considerable distance from it. Due to it, you can determine in which direction the fish is moving.

The camera is powered by a lithium battery with a capacity of 2600 mAh, it consumes less than one and a half watts of power, so it can work offline for about 7 hours. This device is equipped with an extended cable, additionally reinforced with Kevlar thread, it transmits the image to a 4.3-inch LCD display. The interface is Russified. In addition to the camera itself, the kit comes with a cable with a cable reel, a battery and a charger for it.

Advantages:

• The matrix has a high sensitivity;
• Does not need lighting due to LED backlight;
• Rugged waterproof housing;
• Multilingual interface;
• The transmitted picture is very clear.

Flaws:

• There is no light protection visor;
• No stand.

The design provides for a liquid crystal display with a diagonal of 11 cm, there is a cable 30 m long, which is able to withstand loads up to 40 kg. The camera is powered by a battery that, when fully charged, can work up to 7 hours without interruption. Comes with a charger. The camera can be used in a temperature range from -30 to +55 degrees, which makes it almost ideal for fishing in the winter.

It has a night illumination of LEDs with infrared radiation - due to it, you can see everything that happens in muddy or dirty water, as well as after dark. The device has a bracket with which the camera is attached to the spinning rod - you can quickly determine the moment when the fish swallows the bait. The display case is waterproof, pleasant to the touch, all buttons have graphic representations of functions. The interface is in Russian, there is also a translated instruction.

Advantages:

• High viewing angle - 140 degrees;
• The presence of infrared illumination;
• Increased cable length;
• The display is equipped with an antiglare peak;
• The degree of illumination can be adjusted;
• Large operating temperature range;
• Night illumination, allowing you to see, including in muddy water;
• Mounting to the rod is provided;
• Long battery life - about 5 hours.

Flaws:

• Tight buttons that don't develop over time
• Insignificant weight, because of which the camera can be carried away by the current.

The camera is reliably protected from moisture penetration, has a light-sensitive lens - it is capable of transmitting a fairly clear image to the display with an ambient light flux intensity of only 2 Lux. The matrix has a resolution of 500x582 pixels, thanks to which the picture turns out to be contrasting. The device has 8 infrared LEDs at once, there is a light sensor that will activate them in case of lack of lighting. The cord is not as long as the previously reviewed models - only 15 meters, but it will be enough for most water bodies, it can also withstand up to 30 kg.

The monitor is bright, has a diagonal of 9 cm, is equipped with a backlight and a stand with a swivel mechanism. The quality of the transmitted picture can be adjusted. The operating temperature range is from -15 to +60 degrees, which does not allow the use of such a camera in too severe frosts. The battery is capacious - its full charge will last up to 7 hours in normal mode, but if you activate the energy-saving mode, then its operation time will be even longer.

Advantages:

• Very high image quality;
• Streamlined shape, due to which the camera quickly sinks to the bottom;
• Bright monitor on which everything will be clearly visible even on a sunny day;
• High reliability;
• Waterproof housing, both the camera itself and the display.

Flaws:

• Auto focus does not all behave correctly in muddy water;
• Sometimes it is problematic to understand the size of the fish;
• The transmission cord becomes brittle in the cold - it can break.

Despite the fact that this model is in fifth place in the ranking of ice fishing cameras, it is the first digital system developed that allows both shooting and ordinary observation, and to do it in HD format. LCD color display with bright backlight. The wire is durable, fixed in several positions, so you can achieve the most convenient viewing angle. The model has a built-in infrared illumination, due to which even at a considerable depth the image will be quite high quality.

Advantages:

• Long cable - 25 meters;
• The cable is able to withstand loads up to 10 kg;
• High definition video;
• Screen diagonal 7 inches;
• Backlight with adjustable brightness;
• Presence of screen heating;
• Folding screen;
• The ability to charge the battery from a car cigarette lighter;
• Waterproof housing for camera and display.

Flaws:

• High price;
• No sun visor.

A very convenient model, however, it has a significant mass - the camera, together with a case, a charger, weighs about 1 kg, which does not allow it to be conveniently used during winter sea fishing. The camera itself is overall, so you need to use it very carefully so as not to scare away the fish. The camera connector is not very reliable, although the manufacturer claims otherwise.

You can charge the camera from the car's cigarette lighter. It is equipped with 8 infrared LEDs that provide high-quality and clear images from the underwater depths. Best of all, it has proven itself in transparent reservoirs, where suspension does not rise from the bottom. Image quality is quite good, but the camera should not be used at too low a temperature - less than -15 degrees. It has a Russified interface that allows you to quickly configure all the necessary parameters.

Advantages:

• The battery can work from 8 to 10 hours;
• The cable is able to withstand about 12 kg;
• Infrared illumination does not scare away fish;
• Can be fixed both on a special stand and on a rod;
• Ease of setup.

Flaws:

• Intolerance to low temperatures;
• Sometimes the cable breaks in the area of ​​\u200b\u200bthe connection socket;
• To properly use the camera, you need to acquire certain skills;
• The picture is not always clear and bright enough - sometimes in bright sunlight nothing is visible on the display at all;
• High price.

Inexpensive, but quite effective model, which is perfect for summer and winter fishing. The camera will work very well near the baited hook - it can be moved around the hook in search of fish. The design includes a 135-degree wide-angle lens. Thanks to this, you can see a large area next to the bait, see in which direction the fish is moving. The cable length is 15 meters, which allows you to fish at a fairly significant depth.

The camcorder does not have a recording function, so you can only watch what is happening in the water with it. The camera performs well in muddy water, allowing you to view the space at a distance of several meters. The resolution of the monitor is 320 * 240 pixels, it has a system for attaching to the rod, so the camera will always be in front of the angler's eyes - he will not have to be distracted from the fishing process. The model is universal, has small dimensions, which allows it to be used during winter fishing, especially since it can withstand frosts down to -20 degrees. The camera has a zoom function, and both it and the monitor itself are placed in a waterproof case.

Advantages:

• Wide temperature range;
• 9 cm display;
• Wide angle lens;
• Battery life up to 8 hours;
• Long cable;
• Light weight - the camera weighs only 13 g;
• The cable can withstand up to 10 kg.

Flaws:

• Fractures occur in the area where the cable is attached to the monitor.

Transmits images in black and white, the camera is connected to the monitor with a 15 m cable. In addition, it is equipped with infrared illumination. You can store it in a convenient carrying case. Operates on a 12V battery and comes with a charger.

Advantages:

• High resolution picture;
• Large viewing distance;
• Waterproof housing;
• Acceptable cost;
• Possibility of use in severe frosts.

Flaws:

• Black and white picture.

This is the best video camera for winter fishing, however, it is also well suited for summer fishing. It provides not only the functions of video surveillance and video recording, but also an echo sounder. The model is equipped with a sonar, which allows you to quickly navigate even in an unfamiliar body of water, to find the parking lots of fish. The camera has an adjustable zoom, equipped with the ability to suppress interference. The picture is transmitted to the display using a 15 m cable. The camera can also be used at low temperatures - down to -25 degrees. It has a small size, easily crawl into the hole.

Advantages:

• Affordable price for a 2 in 1 device;
• The presence of sonar;
• Possibility of video recording;
• 8 inch display;
• Long battery life.

Flaws:

• Not detected.

Such cameras appeared quite recently, and managed to find their buyer in the face of lovers, both winter and summer fishing. The process of catching fish with underwater shooting becomes more interesting and attractive. Naturally, not everyone can buy a video camera for underwater shooting, but making it yourself is not a problem.

Since this product appeared on the market not so long ago, its price is quite high. The high cost of any fishing equipment pushes anglers to look for simple and cheap solutions. The same can be said about the underwater camera for winter fishing.

These people (fishermen) are considered quite enterprising people who are able to find a way out of any seemingly hopeless situation. They began to make similar designs from more accessible and cheaper elements. Such designs are in no way inferior in their functionality to industrial designs, but cost ten times cheaper.

Assembling an underwater camera for winter fishing with your own hands

As practice shows, there is nothing complicated in this. The main thing is the presence of all the main components, without which the video camera will not work underwater. To assemble it, you will need the following components:

• Car battery.
• Sealed box.
• Extension cable.
• Inverter power supply.
• Miniature TV or modern video camera.
• Lead cargo.
• Diodes for illumination (ultraviolet).
• Quality glue.
• Sealed material.
• Plastic container.
• Insulating tape.

Of great importance is also right choice some components. For example:

1. Camcorders should be selected only in small sizes. They will be the most practical for these conditions. At the same time, one should not forget how high-quality the image is.
2. The underwater box where the camera will be placed must be so tight that not even a drop of water can get inside. In addition, its dimensions must correspond to the dimensions of the device.

Choosing the Right Camera

A high-quality image under water can be obtained only if you choose the right video camera. As practice shows, when choosing, you should focus on such data:

1. Sensitivity. The higher the sensitivity, the clearer the image will be. In the case of using a low-sensitivity video camera, it will be possible to get a cloudy, blurry image, where it will be difficult to see anything.
2. The presence of backlight. When shooting underwater, where visibility is significantly limited, the presence of a backlight for the camcorder plays an essential role in obtaining a high-quality image. But this does not mean at all that there should be a lot of light. A similar factor can scare away the fish.
3. Permissible immersion depth. As a rule, preference is given to cameras with an average depth of immersion. The higher the immersion depth, the more pressure the device experiences. This means that the requirements for the waterproofing device will be high.
4. Viewing angle. Video cameras with a wide viewing angle transmit the worst picture. Basically, cameras with two lenses with small viewing angles are selected.
5. Monitor Capabilities. It is very important that the size of the picture does not lose clarity when it is enlarged. Basically, this factor depends on the manufacturer, who puts certain functions into their product.
6. Prominence of the manufacturer. As a rule, the more famous the manufacturer, the better the quality of his products. The fact is that these two concepts are interconnected. Today, many firms, in pursuit of profit, are trying to produce products similar to those that have been produced for decades by world-famous firms. Take at least the same Chinese who copy various models. Although they are far from real branded models precisely in terms of quality and reliability. A quality product must be accompanied by a quality certificate. If it doesn't, then it's most likely a fake.
7. For camera dimensions. The fishing hole is not that big. In diameter, it does not exceed 100-130 mm. Therefore, the video camera should be easy to enter into this hole and just as easy to pull out. And given that it can be in a sealed box, it is not difficult to imagine what size the video camera should be. When buying a product, you should definitely test it for performance and measure its volume.

Step-by-step assembly of an underwater video camera

1. Test a small TV set in the mode of displaying video information from a video camera. There shouldn't be any interruptions.
2. Try out the operation of the camcorder together with the TV. If the picture is clear and stable, then the video camera is placed in a plastic container. Moreover, it is necessary to ensure that it is well fixed. Holes are made in a certain place and wires are pulled through them.
3. Make weights of a certain shape from lead and place them inside a plastic container.
4. IN right place make holes for the backlight bulbs, and then place them there. The bulbs should already be connected to the wires. The places where the wires come out are carefully sealed with glue and insulated. This is necessary so that water does not penetrate inside. The wires from the bulbs are connected to the camera cable.
5. It is very important to position the camcorder correctly. It should look forward, that is, it should be located horizontally and transmit a clear picture to the TV screen. This must be verified before the sealing process. At the same time, you need to check that all wires are connected to the camcorder, including from the power source, as well as to ensure that the device is charging.
6. If everything works correctly and all the elements are installed, proceed to the process of sealing. To date, the best sealant is silicone or special sealants. It is very important that the seal is perfect.
7. To make it easier and more convenient to lower an underwater video camera into a hole for fishing (well, not by the wires), you need to provide for fastening a strong, better than an artificial rope that is not afraid of water. This will make it possible to lower the video device to the desired depth.
8. Pay special attention to charging the battery. It must always be kept charged and charged immediately after arriving from fishing, otherwise it may fail at the most inopportune moment.

Or maybe it's better to buy a factory underwater camera?

This makes some sense, since a home-made device, and even such a responsible one, can do it, especially not everyone can set it up. Therefore, buying a factory model has its advantages:

1. The factory model is accompanied by warranty and in case of failure of the device, it can be replaced with a new one, or the money can be returned. As for a homemade device, everything is much more complicated here. Branded models designed for underwater shooting have the ability to change operating modes.
2. Ready-made samples are able to record video information and then play it back. As for a home-made device that uses a conventional video camera, it all depends on the choice of video camera.
3. Recently, underwater cameras have gained a lot of interest among anglers. After all, everyone is interested in what happens under the ice, in the area of ​​the drilled hole. You can also use an echo sounder to determine the presence of fish, but it is much more interesting to see everything with your own eyes: is there a fish and what kind.

As for homemade devices, they have their advantages, as well as disadvantages. The disadvantages include the dimensions of the device. As a rule, factory designs are very small in size and consume little energy. For their work, you do not need to carry a car battery with you, which has a significant weight. The main reason forcing many anglers to go down the path of handicraft production of various accessories is the high prices for such products.

Do-it-yourself winter fishing feeder

This model, as well as its counterparts Rivotek LQ-3501, Fishcam-501, AquaSpy AQSMC, are outdated and are no longer sold in our store! New model available !

We bet that every fisherman at least once dreamed of looking under the water and seeing what was happening there. Are there fish there, and what kind.

And then you sit for two hours on a hole or in a boat and think that this pressure is wrong and the fish does not want to peck. Or maybe it's just not there and you need to look elsewhere?
Of course, an echo sounder can help, but it's one thing to see the fish symbols on the screen and quite another thing to look the fish eye to eye.
Think it's impossible? Nothing is impossible with our latest miniature camera, which we have named the Water Eye.

With it you will see a real picture of the underwater world in real time.

It is enough to lower the camera on a thin frost-resistant cord under water - and the underwater world is on your monitor! Special infrared illumination, even in pitch darkness at great depths, will show the presence of fish within a radius of a meter from the camera, or even further: it all depends on the transparency of the water. With a water eye, you will know for sure if there are fish in the place where you are fishing.

If there is, then you need to try to find a key to it, and if not, do not waste time and look for it elsewhere.

And in the search, the water eye will also be an indispensable assistant.

After the very first fishing with a water eye, you will find that it is simply impossible to fish without it.

You will see fish everywhere. Whether she hid in a snag or climbed into the underwater vegetation, she could not hide from the water eye.

At the same time, a camera smaller than a door peephole does not scare away fish, but attracts such fish as perch, ruff, trout or roach, on the contrary. The whole thing, apparently, is in two small infrared LEDs that glow red.

The device fits easily into an ordinary breast pocket, runs on a battery that lasts a long time even in cold weather. And by the way, the water eye can be used in a variety of situations, not necessarily underwater and fishing.

1. Specifications

The camera matrix has a size of 0.25 inches and contains 300,000 pixels, which allows you to see a clear picture with the correct color reproduction.

The camera has high sensitivity and resolution above 420 lines

The camera is equipped with two infrared LEDs, making it possible to observe the fish in complete darkness.

The cord is made of a special material and has a length of 15 meters. Withstands loads up to 10 kg.

The lens body is made of a hard aluminum-magnesium alloy with a protective oxide coating.

The display is a 3.5 inch TFT LCD screen

Resolution 320*240 dots

The image can flip horizontally and vertically and in both planes at the same time.

The display is combined with the rechargeable battery

Parameter setting possible via menu

Built-in battery level indicator

2. Camera Specifications

Dimensions: 34mm * 20mm (length * diameter)

Weight - approximately 15 grams

Resolution: 300,000 pixels

Viewing angle: 150 degrees

Operating temperature: -20 to +60 degrees

Working depth - up to 15 meters

3. Display specifications

Dimensions: 110mm * 76mm * 18mm

Screen Dimensions: 3.5 inches

Screen Resolution: 320*240

Backlight brightness: 300 cd/(m*m)

Battery capacity: 3.7V, 4Ah

Power consumption: 1.9W (including camera)

Battery life: 7.5-8 hours

Weight: 180 grams

Operating temperature: -10 to +60 degrees

4. Delivery set:

Small video instruction:

Real video from winter fishing:

Not so long ago, fishermen were deprived of the opportunity to observe the bottom relief and the reaction of the inhabitants of the reservoir to various baits. Today, this has become a reality thanks to such a device as an underwater camera for summer fishing.

It will be easier for the owner of such a device to choose the best place on the pond and decide on the equipment than a skeptic who is used to fishing the old fashioned way. The family budget will not suffer if an underwater camera for fishing with recording is assembled at home.

Underwater camera device for fishing

The principle of operation of such a device is quite simple: a sealed container with a built-in video camera and lighting diodes is lowered into the hole, which can be rotated to change the viewing angle of the underwater world.

The image is transmitted via cables to the monitor screen and makes it possible to observe how the fish is being caught. The battery is of great functional importance for providing the device with 12 V power, the charging of which must be given due attention for continuous operation.

Homemade options often do not have registrars for further review of the video under water, but for the majority of amateurs this is not an important factor. If it is not possible to purchase a factory underwater camera, you can start creating a do-it-yourself ice fishing camera from the basic elements available at home or purchased at low prices.

Which design to choose?

Experienced owners recommend using a factory product as a model for all those who gathered to build an underwater camera for fishing with their own hands. Using his example, it will be easier for a beginner to understand the device device. It is not necessary to create a complete copy.

Before you start assembling an underwater camera for fishing with your own hands, you first of all determine the depth to which it will dive.

Judging by the numerous consumer reviews, it is absolutely not difficult to make an underwater fishing camera from a smartphone with your own hands. Assembly is fast because optical device already selected.

Ease of operation will be possible if the device is small and light. When choosing a camera, a beginner should pay attention to image quality.

It must be clear. Best Review provide smartphones with a large screen.

When choosing a device for a homemade underwater camera, it is better to give preference to well-known brands.

Opportunities and requirements

The underwater camera expands the technical capabilities of the fisherman, allows him to see how the fish behaves, how it reacts to the bait, and develop the right fishing strategy. But when choosing the constituent elements, their characteristics must be taken into account.

A good sensitive video camera will give a clear picture, while low-sensitivity options will give blurry and cloudy outlines that will be difficult to see.

Most often choose video cameras with a small viewing angle and two lenses. Models with a wide viewing angle are not suitable for underwater use due to poor picture quality. You need to make sure that the selected video camera has a photosensitive matrix, anti-fog protection, night vision function and contrast adjustment function.

It is necessary to take into account the pressure when using the camera at great depths, in most cases, video cameras with an average depth of immersion are used. In addition, the chamber must be so small that, together with the sealed housing, it is easy to pass into the hole.

The presence of lighting is necessarily provided for in the design, but the lighting should not be excessive so as not to scare away the fish. For underwater observation, ultraviolet diodes are used. It is necessary to protect the lighting system from overheating and burnout, for which the circuit provides for the use of resistors. You can also purchase a camera with built-in LEDs.

A good TV screen is also of great importance: a clear picture is the main thing when creating homemade design. The monitor should give a high-quality image of the underwater process. For this purpose, portable TVs are widely used, when buying which you need to pay attention to firms of familiar manufacturers so as not to get a bad fake. Tablets and smartphones are also used.

Before installing an underwater camera, you should consider its capabilities:

• the camera will show the behavior of the fish;
• you can see how the fish reacts to the bait;
• the device helps to see underwater life.

In addition, the camera is equipped with such parameters as:

• photosensitive matrix;
• has fog protection;
• adjusts the contrast of the area;
• night vision function.

This device will be an indispensable thing for winter fishing.

About standard equipment

A self-made underwater camera for fishing must be equipped with the following components:

• A special video camera that can be immersed to a considerable depth. However, such a device is quite expensive. For those who want to save money, there is a budget option - a car rear view camera. True, for successful use it will have to be additionally equipped with a sealed case.
• Monitor. Again, we take care of the family budget and purchase Car DVR.
• A cord with a length of at least 3 m. It will connect the camera to the monitor.

• Rod, reel and line. Using these devices, it will not be difficult to change the immersion depth, control the location of the device in the reservoir, and, if necessary, quickly remove the self-made underwater camera for fishing.
• A car battery that will power the system.

In addition, for assembly you will need:

• extension cord and inverter;
• lead weight;
• ultraviolet diode for illumination;
• superglue, sealant and electrical tape.

About additional components

In addition to the above elements, which are considered basic for such devices, a home craftsman can also equip his "home-made" with additional components such as LED backlight and echo sounder.

The use of these gadgets will not be superfluous. On the one hand, a homemade underwater camera for fishing with recording will require large financial investments from the master. On the other hand, judging by the numerous reviews of the owners, fishing with such a device fully pays off.

DIY assembly

When making a camera with your own hands, the following materials are usually used:

• car battery;
• sealed box;
• inverter;
• extension;
• electrical tape;
• video camera;
• diodes for illumination;
• lead weight;
• glue;
• Plastic container.

For a homemade camera, small dimensions are needed so that the device remains practical in use and has a seal at a certain depth of the reservoir.

Detailed assembly instructions

To properly install an underwater camera, you need to follow a number of rules:

1. Screen preparation. His work should not fail. To do this, the camera must be set up and put in a sealed container so that it does not ride in it.
2. Make a hole for the cable on the top of the container.
3. Melt the lead and pour it into small molds, then cool. Then put the weights on the bottom of the container.
4. Make holes for the LEDs in the container.
5. Lubricate everything with glue and wind the electrical tape so that water does not get into the container.
6. Solder all the wires from the light bulbs so that you get a connecting circuit with the camera cable. The camera must look straight ahead and transmit a clear image.
7. The camera must be fully charged. And for subsequent charging, you need to bring the wire out and combine it with the battery.
8. Seal everything again.
9. To make it easier to lower the homemade device into the water, you can attach a belt or rope to the camera body. Thus, the angler will be able to control the depth of the camera.

About product functionality

On the shelves of specialized stores there is a large assortment of factory cameras that have a fairly large set of built-in functions. Depending on the possibilities, the cost of branded devices can vary from 6 to 45 thousand rubles.

Everyone who is going to make such a device at home should understand that a “home-made” should not differ much from that purchased in a store.

First, what the master needs to pay attention to is the depth of immersion. Because under the influence of a large mass of water, the camera may break.

Secondly, and this is no less important than the previous point, it must have a rigid and sealed body.

Thirdly, the camera must be with a high degree of sensitivity and high-quality lighting. Experienced owners of "home-made products" recommend observing the measure in this matter, since dim light will not allow you to catch all the details at the bottom of the reservoir, and a very bright one will scare away the fish.

Schemes and materials for a homemade camera

Today, there are many manufacturers of cameras that shoot underwater, and in order to choose a good and inexpensive one, the average person will have to spend a lot of time and effort to study them.

Here are the most popular camera manufacturers:

Where to begin?

Work should begin with the preparation of the monitor. You need to make sure that the device is configured correctly. After that, using a special USB cable, it connects to the camera, which will subsequently sink to the bottom of the reservoir.

A picture will be displayed on the monitor through the wire. It is important that the image on the monitor is free from interference.

After that, you can do the camera itself. It must be installed in a special durable container.

For its arrangement, many home craftsmen use various sealants and mechanical fasteners. It would be useful to solder the wires (and not twist).

The upper part of the container must be equipped with a special hole for the wire. The cable must have an appropriate protection class (allowing it to be used underwater).

Then you need to connect the battery. Lead weights are placed on the bottom of the container. A smartphone is also attached there. Top part The container is equipped with additional holes for illumination.

Alternative - buying a ready-made camera, what are the advantages?

Although many fishermen prefer homemade cameras, there are still advantages to purchased cameras:

• On store cameras for fishing there is a certificate of conformity, and in case of a breakdown, you can take it back to the store and they will repair the device for free or exchange it for another.
• Purchased devices have features that homemade ones will not. Store-bought ones can record video and show it, which may not be available in homemade devices.

In any case, the choice is up to the angler: do it yourself or buy in a store.

trial test

Before operating a homemade device, experienced fishermen advise testing it at home. The ideal option for this purpose, a bath filled with water will become.

Having lowered the camera into it, you need to check how tight the joints and wire entry are. If leaks are found, they should be additionally treated with sealant or wrapped with electrical tape.

In addition, testing in a bathroom or other container will provide an opportunity to check the quality of the picture on the monitor. If the image on the screen is noisy, then this means that in the "home-made" the wire connections are not made well enough.

Underwater cameras for ice fishing

Getting into the winter hole, the camera displays a good and high-quality picture on the external display. As a result, the fisherman can save valuable moments from the next catch, get valuable information and enrich the fishing experience with new fascinating facts.

Technological progress concerns all branches of human activity, and fishing in winter is no exception. In a short period of time, underwater cameras have become the most integral attribute of this kind of activity, so their absence turns fishing into a waste of time. Most of these devices consist of several separate parts, namely:

• monitor;
• sealed underwater camera with backlight function;
• long waterproof cable;
• charger;

How to use the underwater camera

If you bought your first underwater video camera, then a good catch is guaranteed. Even if the fish is away from your gear, most likely? soon you will be able to catch it. Before you start using the device, be sure to read the instructions and instructions for use.

And although the underwater camera market is represented by a wide variety of devices, the basic principles of their operation remain the same. To start exploring the reservoir, in addition to buying a camera, you will have to find a cable to carry out the descent and further rise of the tracking device back up.

The sequence of actions is as follows:

Controlling an underwater video camera with your own hands is not as difficult as it seems at first glance. It is enough to follow some tips and correctly evaluate a number of features of successful fishing:

• Big fish are known to have a preference for snags, relief changes, and bumps;
• the first dive involves lowering the camera to a mark of 10-15 centimeters above the bottom;
• try to stop the dive in time and prevent the video camera from hitting the bottom of the reservoir or colliding with obstacles. Otherwise, it may cause damage.

Criteria for choosing a good ice fishing camera

It is worth noting that purchased underwater cameras are small and require little energy. Therefore, you do not have to carry a car battery with you to keep the device running.

Fishing gives pleasure in its process - each of us knows about it. But after all, besides this, we always want to get results from fishing - to catch not three perches, but a dozen kilogram pikes - this will be a catch! Each of us dreams of this, but not everyone knows how.

How long have you had a really BIG CATCH? When was the last time you caught TEN BIG PIKE/CARP/BREAM?

A good catch can be achieved (and we know this) thanks to good bait. It can be prepared at home, you can buy it in fishing stores. But it is expensive in stores, and to prepare bait at home, you need to spend a lot of time, and, to be honest, homemade bait does not always work well.

Do you know that disappointment when you bought bait or cooked it at home, and caught three or four bass? Certainly familiar. So maybe it's time to use a really working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

Of course, it is better to try once than to hear a thousand times. Especially now - the season! A 50% discount on your order is a great bonus!

Hurry up and order Fishhangri!

Catching fish from the ice "blindly", with a focus on experience, signs and other fishing wisdom, is gradually becoming a thing of the past. Now all this allows you to see, control a number of devices that have appeared on the market.

Among them are new attributes that help in fishing, underwater cameras. They allow you to see what is happening under the hole, whether there is a fish under it, how it behaves when the bait is fed. Modern camera models allow you to record all this, which can later be used to analyze the situation, your actions, to create even video lessons, videos, etc.

The market is replete with different cameras that are designed for fishing. If finances allow, you can choose among them the right one. But if there are problems with money or you want to do something yourself, then you can make an underwater camera with my own hands.

Materials and devices

- a modern camera: it is better if it is small and with good quality Images;

- a sealed box in which an underwater camera will be placed; the main requirement for it is tightness, if you allow even a drop of water to get inside, everything will be spoiled; in terms of size, the box, of course, must correspond to the dimensions of the camera;

- small TV

- a car battery, which will be needed to power the camera;

- extension cord;

- inverter;

- lead, from which the cargo is arranged;

— ultraviolet diodes to provide illumination during underwater surveys;

- you will also need superglue, electrical tape, plastic containers, sealant.

Assembly order

1. Check and prepare the TV for work. It should show a good picture.

2. Two holes are arranged in the upper plane of the sealed box. Through one, an extension cable is inserted into the box. Through the second - a cable that connects the camera to the TV.

3.Punch a few more holes in the box, into which light bulbs are inserted for illumination. The wires from the light bulbs are soldered into one circuit (for example, with a parallel arrangement), which is connected to a cable that provides electricity to the camera.

4. All holes are covered with glue, sealed with electrical tape, achieving their complete sealing.

5. Melt the lead and pour small elongated sticks out of it. They are placed at the bottom of the box. They make the box heavier and allow you to lower it with the camera to the desired depth.

6. Set up the camera, connect it to the cable, after which it is carefully placed in the box. For stability, the camera is surrounded by a soft material.

The camera is placed inside the box so that it has a clear direction forward and horizontally and transmits a high-quality image. The latter is checked using a TV.

7. Carry out sealing of the box using sealant, electrical tape, glue.

8. A torso (rope, belt) is attached to the box, with which the camera will be lowered to a depth.

For convenience, you can combine it, the power cable and the cable for connecting the video camera to the TV into one core, fastening it at some intervals, for example, with electrical tape. It is desirable to arrange (attach) marks along the cable every meter, by which you can control the depth of lowering the camera.

You can do this by tying bright strips of plastic, fabric.

9.Connect the power cord of the camcorder to the battery. The latter must be checked for the amount of charge in order to avoid misunderstandings on the spot.

In general, the underwater camera is ready. Before using it, the TV is installed near the hole. Then everyone turns on and lowers the video camera with a cable into the hole and to the desired depth. Further, an underwater picture is watched on TV.

About operation on the reservoir

As experienced fishermen advise, you need to work with a homemade camera very carefully. It sinks to the bottom of the reservoir with the help of a cable.

The distance from the camera to the fishing bait must be at least 80 mm. After the “home-made” is at the bottom, you need to wait some time for the raised silt and sand to settle down.

This should provide a clear view on the monitor. Now you can start exploring the bottom topography.

The camera should be positioned in such a way that the bait is clearly visible on the screen.