Spinning is a special rod that is designed for catching predatory fish. Any angler should know how to properly assemble a spinning rod. Proper assembly and competent selection of bait is the key to success. You need to pick up a reel, deal with spinners, and also fix it all correctly.

May be difficult to assemble, so there is step by step instructions With detailed description assembly process. Here are the main steps:

1. You need to take a set of rings and attach it to the rod. You need to use the entire set, starting with the large ring. The smallest is located at the end of the spinning rod. It is important that the rings are attached to the rod in one line and on one side.
2. A reel is attached to the rod. There is a special hole for this. As a standard, it is located on the right, but for a left-hander, you can attach a coil on the left.
3. The fishing line is pulled through the rings and attached to the spool.
4. Then the swivel is attached. It helps the line not to twist.

The first time this procedure may take time, but in the end, any beginner will get their hands on it, and the process will not cause difficulties.

Coil

The spinning reel is an important part of any spinning. They differ in their parameters, but it is desirable that the coil be as light as possible in weight. A spinning reel is not the only, but the most reliable option. With it, casting and fishing becomes not a very difficult process.

The spool of the reel is where the line is wound. This drum must be smooth and free of any defects. Keep this in mind when choosing a spool in a fishing shop.

When choosing a reel, it is necessary to pay attention to the capacity of the spool, which is indicated in mm., And the number of bearings. The capacity of the spool includes both the amount of line and its diameter. The larger the diameter, the less line you can wind on the same spool.

The number of bearings affects the quality of the reel. Therefore, a large number of bearings is better. The mechanism becomes reliable and moves smoothly, and also has frictional properties.

How to wind a fishing line on a spool

To prevent the line from becoming entangled in a spiral, it is necessary to unfold the rod and wind the line only in this position. The process of threading begins with a tulip, and you will have to draw a fishing line through all the rings. next step is the fastening of the fishing line on the reel with the help of the bow. Tension is necessary for good winding. You can create it yourself or ask for help.

With proper winding, it is important to ensure that the distance from the fishing line to the side is strictly 1-2 mm., No more, no less. You can also buy a device in the store that winds the fishing line.

What to choose: braided or monofilament

Monofilament line and braided line have their own advantages and negative sides. There are supporters of both. It's hard to recommend anything. Let's analyze these types of fishing line separately.

• Monofilament line. Serves longer. It will not be cut by stones when playing fish. It is inexpensive. Of the minuses, it should be noted that after unwinding it can remain twisted.
• Network. It does not twist, and therefore it is easier to cast with it. Has more durability. Of the minuses - it costs more, serves less. Can break on sharp rocks.

In any case, both options have their supporters. Therefore, it is worth focusing only on your personal tastes and preferences.

Lures

Lures for spinning are divided into three types. Metal, silicone, wobblers. A huge number of baits confuse beginner anglers. The simplest are metal spinners. They can be oscillating and rotating. Any kind of predator and even simple fish are caught on the latter.

The oscillating lure is better for pike and zander. Silicone lures are a cheap and reliable option. They can be edible and are often used for fishing.

Spinners are suitable only for experienced and professional fishermen.

Gear and equipment

Fans of spinning fishing know how to do it right. Spinning tackle is divided into the following components:

1. Rods. They differ in class and order. The length of the rod depends on the fishing technique, fishing conditions and casting distance. Action is the flexibility of the rod.
2. Coil.
3. Fishing lines.
4. artificial lures.

Connection of fishing line and leash

To connect the leash to the fishing line, you need to understand several knots. Moreover, each knot is suitable for its type of fishing line.

1. Water node. It is used to tie the main fishing line and the main leash.
2. Loop to loop. A loop of thick fishing line is threaded into a loop of thin fishing line. The ends of the latter are threaded into a loop of thick fishing line. The most famous way to tie the leash to the main line.
3. Blood knot. Convenient for tying lines that vary in length. One end of the line is wrapped around the other. There should be at least 6 turns. Then we return to the beginning and thread the end between the fishing lines. Then wrap the second end around the first. Again we return to the beginning and stretch the end between the fishing lines. We tighten the knot.

The bait is selected individually, depending on the type of fish, as well as on specific fishing conditions. Good anglers have a lure for every species and every situation.

Conclusion

Catching a predator from the shore with a spinning rod is not difficult. But to do something so interesting and outdoor activities, you need to learn how to collect spinning, as well as understand baits and tackle. Fishermen who have experience get real pleasure from such a holiday.

In this article, we will consider how to wind a line on a spool. 100 meters of fishing line with a thickness of 0.3 mm is wound on a standard reel. It is calculated that the winding of the line on the reel is usually wound 2 mm below the edge of the bobbin collar.

More than the edge of the side, the winding of the fishing line on the reel is not performed; at the moment of casting, the fishing line is guaranteed to break the turns and form a beard. The lower the line is wound on the reel, but the lower it is, the shorter the casting distance.

Professionals suggest winding braids of 250 meters each, but it’s easier to wind up additional fishing line to solve the problem - it’s cheaper and the effect is greater (see article: ““). At first, I tried to make different formulas to calculate the length of the winding line, but, firstly, it did not work out with the required accuracy, and secondly, this length is determined automatically during the experimental winding of the fishing line on the reel.

The reel designers, as a result of experiments, have revealed a certain improvement in casting performance in relation to the winding profile.

1. The narrowing of the winding towards the tulip (front cone) is embodied in the Long Cast spool, which really enhances the casting distance and is used in carp, float and feeder fishing.
2. The narrowing of the winding to the handle (rear cone) is made in the ABS spool from "Daiva", which increases the casting distance, and most importantly - greatly reduces the possibility of dropping loops, as well as "beards" when fishing with spinning jerky fishing. For spinning players fishing with twitching, jigging and jerking, such winding of fishing line on the reel is simply a must. Use this winding on a braid with a diameter smaller than 0.2 mm. From cone windings, direct winding gives similar results.

Winding experiments

For reels from Daiwa and Abu Garsia, as well as the well-known in Ukraine inexpensive Cobra, the winding style is formed by the taper of the spool. Shimano has taken a unique approach to adjusting the profile by adding washers under the spool.

The downside of the system with washers is the impossibility of using it in more well-known and convenient reels with a rear brake. Any winding profile can be set at the time of backing winding.

Winding fishing line: scheme

• Having installed the reel on the rod, we first wind the main line with the help of the reel.
• Next, remove the spool and tie reliable node backing and main line.
• Next, hold the spool with your left hand, little by little, scrolling towards the winding, wind the backing with your right hand.
• When winding, gradually organize any profile, in particular ABS. The height of the cone must be large - approximately 1.5 -2.5 mm. In general, this is a matter of your experience, in particular, K. Kuzmin, who is familiar to everyone, writes: “ It is necessary to raise the angle of the cone in case of constant reset of the loops».
• Now you need to turn the scaffold backing down, and the base up. If there is a guarantee that no one will climb into the loops of the fishing line with their feet, then the forest can be spread out on the floor of the apartment, creating large loops. Then, tying the backing on the spool, make a working winding.

I do my work entirely by hand. I form a reverse cone from the first turns and adhere to a similar profile at all stages of winding. As a result of this approach, after casting, your reel will independently fold the line according to a given profile when reeling.

Warning

Although, a caveat must be made that as a result of all these rewinds, the line is twisted and often requires unwinding. The main thing is that the reel has an anti-twisting line roller. A swivel was tied in front of the feeder. Such a pair will spin any level of twist automatically, practically, in a couple of casts.

Consider a device for winding fishing line. It consists of the following elements:

• nail;
• and a circle of rubber 7.5 mm thick.

The nail is taken of such a size that it would go into the hole of the spool almost closely. It would be nice to have a stem from similar coils (only faulty ones). In the absence of such, you can rivet the nail itself a little, creating a slightly elliptical configuration for it along the hole in your spool. We pierce the rubber in the center with a nail.

Then we insert it into the spool, and take an electric drill or a screwdriver and clamp this device in the drill chuck. In order to better bind and increase the friction force between the rubber band and the spool, we slightly tap on the nail, drowning it in rubber (you can also use “micropork”). We knit the fishing line on the spool with a self-tightening knot, and then tighten the knot, wind it clockwise, hold the bobbin with the fishing line in one hand, by the central hole, take the drill in the other hand and, adjusting the speed of the cartridge, we wind it.

It is not necessary to wind the line strongly, we only control the uniform laying of the line along the spool, leading the line up and down

We fill almost the entire spool, leaving a shoulder of 1.35 - 2.35 mm; with a denser winding, the forest can sometimes be thrown off the spool. With such winding, the twisting of the fishing line does not occur. On the water, the fishing line looks aesthetically pleasing and even, and in this case it lasts much longer.

Video lesson “How to wind a fishing line on a reel”

Conclusion

I hope that guided by the advice of this article, you will be able to properly wind the line on the reel of your rod. Good luck!

• 2 Inertialess reels, designations, characteristics, device An ideal option for fishing reels for fishing rods and spinning rods are inertialess reels. With their help, you can catch any fish in a wide variety of places. Such reels are the most common among fishing enthusiasts and among professionals. Learn how to properly mount Texas rig for spinning fishing How to write correctly: inertia-free or inertial-free? The Russian language is one of the most difficult languages, as a result, errors like the question in the title occur very often. Let's turn to the rules of the Russian language: After prefixes ending in a consonant, instead of “i”, “y” is written in accordance with the pronunciation, for example: play - play along, play out, play; search - find, find, induction - non-induction. IN this rule, as in the whole language, there are still many notes and additions, but in our case they are not relevant, i.e. correct spelling: spinning reel The device of the inertialess reel and the principle of operation Fishing reels come with a spool: open; semi-closed; closed. These names imply whether the spool is visible on them or not, i.e. in the version with a closed and semi-closed spool, there is a protective cap in the design, which either completely covers the spool or partially. Coils of semi-closed and closed type have significant drawbacks and are almost never used at present. With an open spool, the reel device looks like this: The body in which the transmission mechanism is located. Spool for winding line. Liner with roller. Brake (friction). Handle. The principle of operation - during casting, the fishing line passes through the side cheek of a fixed spool, to prevent the discharge of excess fishing line. The line is wound onto the spool with the help of a special line stacker. At the moment of casting, it is retracted to the side, no matter what prevents the free discharge of the fishing line. By turning the handle of the line stacker, the line falls on the roller present there, with the help of which the line is wound onto the spool. The spool can be attached in 2 ways: with the end button on the lock or rigidly. The latter option is preferable, because allows you to change spools. For tasks requiring the maximum load on the fishing line when pulling the fish, a brake is used, which can have front or rear adjustment. It can be a special lamb on the spool or a handle (used more often and works better). Switches various types(flag, sliding) are used to operate braking system. Easy-to-use slide switches. They are located at the bottom or back of the coil body. The transmission mechanism is located in the housing. To ensure reciprocating motion when winding the spool, and at the same time increases the speed of rotation of the line stacker. Any coil is characterized by such indicators: gear ratio; the number of bearings; spool type; spool capacity; overall dimensions; weight. There are additional indicators that are paid attention to - the load on the clutch in kg and how many cm of fishing line is wound in one turn of the handle. All these indicators are more often guided by amateurs. fishing. Designations on the reel The following inscriptions can be applied to import-made inertialess reels: Gear ratio - indicates the gear ratio, which indicates the ratio of the handle turnover to the line layer revolutions and the larger it is, the greater the winding speed; Match Spool, Long Cast - these inscriptions indicate that you can make a long cast; Ball bearing - this determines the number of bearings; ATS, or Anti-Twis - the presence of an anti-twist (anti-twisting) system that reduces the twisting of the fishing line; Fightin' Drag - the presence of a two-stage friction brake adjustment; Continuous anti-reverse - the presence of a special system that is necessary in order to hard hit there were no gears; Avto Cast, or Speed ​​Cast - the presence of a semi-automatic casting system; AVS, dyna balance - the coil is equipped with an anti-vibration system; Ergonomic design - indicates that an ergonomic design has been applied. It is mandatory to indicate the ratio of the diameter of the fishing line and its quantity (capacity of the spool). Popular manufacturers and models of inertia coils Domestic and foreign manufacturers produce inertia coils according to different technologies and have a wide the lineup. Among them, coils of manufacturers from Japan, China and Europe are famous for their special popularity. Particularly popular with fans fishing and considered the main of the best, the spinning reels of the Japanese company Daiwa, which is the world's leading manufacturer of fishing products, are used. High quality and compliance with high standards - that's what characterizes the company's products. Currently, it produces more than 50 types of spinning reels. The quality of the coils created by this company is determined by: properly selected material; precise balancing; bearing capacity and sufficient rigidity of the kinematic pair. Many anglers believe that the more bearings in a reel, the better it is, but with the advent of a new high-quality anti-friction material that Japanese manufacturers have introduced in the production of their product, this has become less relevant. It is known that from 1 to 15 bearings can be installed in the coils of this company, but even with a minimum number of them, the coil works perfectly. As well as inertialess coils that Daiwa produces are presented from inexpensive models to elite ones. They differ in the following ways: design complexity; the material from which they are made; by the number of elements; production technology. You can buy the products of this company in a fairly wide price range - from 600 rubles to 45,000 rubles and even higher. All models provide: maximum long casts; wiring sensitivity; smooth running during wiring; smooth power drive; lack of beating and hum in the coil; small weight and dimensions; high durability; thoughtful design. Among the cheapest Daiwa spinning reels, the model of the Sweepfire B series (Sweepfire 2500B) has proven itself well, which has a gear ratio of 5.3: 1, 1 bearing, a clutch load with a mass of 4 kg, and exactly 79 cm of fishing line is wound with one turn of the handle , and the spool capacity is 0.5mm/150m and the weight of the tackle is 306g. There is a special balancing system, a folding and reinstallable handle. Such a coil costs 600 rubles. The most expensive model from the Saltiga Z series (Saltiga-Z5000) has a gear ratio of 4.3:1, 15 bearings, a friction load with a mass of 30 kg, and with one turn of the handle exactly 101 cm of fishing line is wound, and the spool capacity is 0.35 mm / 370 m and tackle weight 825 gr. Coils of this series are protected from water, have anti-corrosion protection of all elements. The spool is made of duralumin, has a titanium side, which is covered with cermet. The bearing of the line stacker can withstand a load of up to 80 kg. Used for both light and heavy lures. Such a coil costs 45,000 rubles. The market is full of coils of a very low price range, especially the Chinese manufacturer stands out. As a rule, such a coil serves no more than 2 years and cannot be repaired. Coils at a price of 450 rubles and below should not be taken into account at all, because. this is not serious. Chinese manufacturer coils have attractive appearance, as well as equipped with some of the most modern systems , but very poor quality. They do not live long and often simply crumble after a short operation. But here you can find an acceptable option. Tica products are well known to anglers (models Tica Cambria LZ2050 7+1bb, Tica Caiman CA205, etc.), they are reliable and durable. Coils of this company also gained worldwide fame thanks to many years of cooperation with Daiwa. But the quality of such coils is unstable. You can buy a good copy, or you can run into an obvious hack. Perhaps we can name another Chinese manufacturer that produces good coils at low prices. This is Okuma (models Okuma Citrix 273-VLX, Okuma Tormenta TT-260WLX, etc.). The disadvantages are winding and the inconvenience of switching the backstop (from below, not from behind). The bearings are excellent, the overrunning clutch is modern, the line roller has a large diameter bearing. The products of a European manufacturer are represented by the German company DAM (models FIGHTER PRO MET. 160 FD 1283160, Coil QUICK A-HEAD 100 1095100, etc.) - excellent quality and quality factor. Excellent workmanship, the most modern materials, the price is above average. But they are worth it. Having bought such a coil, you can be sure that it will last a long time without any repair. Another manufacturer of reliable reels is Mitchell, a French-based company specializing in the production of products for fishing. Among them are world-famous spinning coils such as Tuff-Body Spro ZaltArc XS. Solid, have protection against salt water, clutch protection from dirt and water, a cross-shaped line winding mechanism, spools with line clips and a special front drag system with fine tuning. If we add the original design to this, then these coils are rightfully considered the most reliable, despite their price, which corresponds to the quality. It must be remembered that many manufacturers transfer their production to other countries and there such a coil is already produced under the brand name of another manufacturer, which does not always correspond to the quality of the original. Sometimes you can see coils without a logo. Hence the conclusion is to look at what you are buying and focus on buying goods from well-known companies. How to choose a reel First of all, you need to decide on the following conditions: fishing conditions; the weight and size of the bait; line thickness; rod ring size. All these parameters must be coordinated with each other. Also, when choosing an inertialess coil, it is necessary to pay attention to the following: there should be no handle play at all; there should be no transverse play of the spool; the fishing line should be wound smoothly, lie down evenly; the line stacker should not spontaneously snap into place; the coil should not vibrate during rapid rotation; the freewheel switch and clutch must work clearly. Do-it-yourself donka for catfish

How to assemble a spinning rod (donk, feeder, fishing rod)

Now I will talk about the obvious thing ... So, at least somewhat knowledgeable anglers do not need to read further. But, for those who are just about to start fishing and are at the very beginning of their journey, the question may arise: how to assemble a spinning rod or other fishing tackle.

It's not very convenient to talk about such simple things, but I see that this kind of questions periodically arise on the net.

So, to assemble spinning you need:

- rod;

- Coil;

- Fishing line or cord;

- Leash;

- Bait.

The rods can have reel seats of different designs. The bottom line is to unscrew the screw of one design or another. So we can spread the clamps and install the coil. Then we twist it back until it stops, thereby fixing the coil.

We have done the main part of the spinning assembly. Now we will wind the fishing line.

It is necessary to open the bail of the line-layer, stretch the end of the fishing line through all the rings and tie the end to the spool. Then, close the shackle of the line stacker.

Usually, normal spinning reels have 2 spools in a set. We tie the fishing line with one of these knots to the spool. We wind the purchased fishing line or cord on one spool. If the fishing line lies deep and there is still space in the spool, it is worth winding the so-called. backing - thread or old fishing line so that only 2-3 mm remains on the spool from the shoulder to the fishing line.

As a result, we rearrange another spool. We tie the end of the backing to this spool and wind everything to the end.

We tie the leash with one of the knots indicated in the link above. We fasten the bait through the clasp on the leash. Everything is very simple!

Inertialess coils, designations, characteristics, device

The ideal option for fishing reels for fishing rods and spinning rods are spinning reels. With their help, you can catch any fish in a wide variety of places. Such reels are the most common among fishing enthusiasts and among professionals.

Learn how to properly mount a Texas spinning rig.

How to write correctly: inertialess or inertialess?

The Russian language is one of the most difficult languages, as a result, errors like the question in the title occur very often. Let's turn to the rules of the Russian language:

After prefixes ending in a consonant, instead of “and”, “s” is written in accordance with the pronunciation, for example:

• play - play along, play, play;
• to search - to find, to find
• induction - non-induction.

In this rule, as in the whole language, there are still many notes and additions, but in our case they are not relevant, i.e. correct spelling: spinning reel

Inertialess coil device and principle of operation

Fishing reels come with a spool:

• open;
• semi-closed;
• closed.

These names imply whether the spool is visible on them or not, i.e. in the version with a closed and semi-closed spool, there is a protective cap in the design, which either completely covers the spool or partially. Coils of semi-closed and closed type have significant drawbacks and are almost never used at present.

With an open spool, the coil device looks like this:

1. The housing in which the transmission mechanism is located.
2. Spool for winding line.
3. Liner with roller.
4. Brake (friction).
5. Handle.

The principle of operation - during casting, the fishing line passes through the side cheek of a fixed spool, to prevent the discharge of excess fishing line. The line is wound onto the spool with the help of a special line stacker. At the moment of casting, it is retracted to the side, no matter what prevents the free discharge of the fishing line. By turning the handle of the line stacker, the line falls on the roller present there, with the help of which the line is wound onto the spool. The spool can be attached in 2 ways: with the end button on the lock or rigidly. The latter option is preferable, because allows you to change spools.

For tasks requiring the maximum load on the fishing line when pulling the fish, a brake is used, which can have front or rear adjustment. It can be a special lamb on the spool or a handle (used more often and works better). Switches of various types (flag, sliding) are used to operate the brake system. Easy-to-use slide switches. They are located at the bottom or back of the coil body.

The transmission mechanism is located in the housing. To ensure reciprocating motion when winding the spool, and at the same time increases the speed of rotation of the line stacker.

Any coil is characterized by such indicators:

• gear ratio;
• the number of bearings;
• spool type;
• spool capacity;
• overall dimensions;
• weight.

There are additional indicators that are paid attention to - the load on the clutch in kg and how many cm of fishing line is wound in one turn of the handle. All these indicators are more often guided by lovers of fishing.

Coil markings

The following inscriptions can be applied to import-made inertialess coils:

• Gear ratio - denotes the gear ratio, which indicates the ratio of the turn of the handle to the turns of the line stacker and the larger it is, the greater the winding speed;
• Match Spool, Long Cast - these inscriptions indicate that you can make a long cast;
• Ball bearing - this determines the number of bearings;
• ATS, or Anti-Twis - the presence of an anti-twist (anti-twisting) system that reduces the twisting of the fishing line;
• Fightin' Drag - the presence of a two-stage friction brake adjustment;
• Continuous anti-reverse - the presence of a special system, which is necessary so that there is no strong blow to the gears;
• Avto Cast, or Speed ​​Cast - the presence of a semi-automatic casting system;
• AVS, dyna balance - the coil is equipped with an anti-vibration system;
• Ergonomic design - indicates that an ergonomic design has been applied.

It is mandatory to indicate the ratio of the diameter of the fishing line and its quantity (capacity of the spool).

Popular manufacturers and models of spinning reels

Domestic and foreign manufacturers produce inertialess coils using different technologies and have a wide range of models. Among them, coils of manufacturers from Japan, China and Europe are famous for their special popularity.

Inertialess reels of the Japanese company Daiwa, which is the world's leading manufacturer of fishing products, are especially popular among fishing enthusiasts and considered the main of the best. High quality and compliance with high standards - that's what characterizes the company's products. Currently, it produces more than 50 types of spinning reels. The quality of the coils created by this company is determined by:

• properly selected material;
• precise balancing;
• bearing capacity and sufficient rigidity of the kinematic pair.

Many anglers believe that the more bearings in a reel, the better it is, but with the advent of a new high-quality anti-friction material that Japanese manufacturers have introduced in the production of their product, this has become less relevant. It is known that from 1 to 15 bearings can be installed in the coils of this company, but even with a minimum number of them, the coil works perfectly.

As well as inertialess coils that Daiwa produces are presented from inexpensive models to elite ones. They differ in the following ways:

• design complexity;
• the material from which they are made;
• by the number of elements;
• production technology.

You can buy the products of this company in a fairly wide price range - from 600 rubles to 45,000 rubles and even higher. All models provide:

• maximum distance casts;
• wiring sensitivity;
• smooth running during wiring;
• smooth power drive;
• lack of beating and hum in the coil;
• small weight and dimensions;
• high durability;
• thoughtful design.

Among the cheapest Daiwa spinning reels, the model of the Sweepfire B series (Sweepfire 2500B) has proven itself well, which has a gear ratio of 5.3: 1, 1 bearing, a clutch load with a mass of 4 kg, and exactly 79 cm of fishing line is wound with one turn of the handle , and the spool capacity is 0.5mm/150m and the weight of the tackle is 306g. There is a special balancing system, a folding and reinstallable handle. Such a coil costs 600 rubles.

The most expensive model from the Saltiga Z series (Saltiga-Z5000) has a gear ratio of 4.3:1, 15 bearings, a friction load with a mass of 30 kg, and with one turn of the handle exactly 101 cm of fishing line is wound, and the spool capacity is 0.35 mm / 370 m and tackle weight 825 gr. Coils of this series are protected from water, have anti-corrosion protection of all elements. The spool is made of duralumin, has a titanium side, which is covered with cermet. The bearing of the line stacker can withstand a load of up to 80 kg. Used for both light and heavy lures. Such a coil costs 45,000 rubles.

The market is full of coils of a very low price range, especially the Chinese manufacturer stands out. As a rule, such a coil serves no more than 2 years and cannot be repaired. Coils at a price of 450 rubles and below should not be taken into account at all, because. this is not serious.

The coils of the Chinese manufacturer have an attractive appearance, and are also equipped with some of the most modern systems, but they are made very poorly. They do not live long and often simply crumble after a short operation.

But here you can find an acceptable option. Tica products are well known to anglers (models Tica Cambria LZ2050 7+1bb, Tica Caiman CA205, etc.), they are reliable and durable. Coils of this company also gained worldwide fame thanks to many years of cooperation with Daiwa. But the quality of such coils is unstable. You can buy a good copy, or you can run into an obvious hack.

Perhaps we can name another Chinese manufacturer that produces good coils at low prices. This is Okuma (models Okuma Citrix 273-VLX, Okuma Tormenta TT-260WLX, etc.). The disadvantages are winding and the inconvenience of switching the backstop (from below, not from behind). The bearings are excellent, the overrunning clutch is modern, the line roller has a large diameter bearing.

The products of a European manufacturer are represented by the German company DAM (models FIGHTER PRO MET. 160 FD 1283160, Coil QUICK A-HEAD 100 1095100, etc.) - excellent quality and quality factor. Excellent workmanship, the most modern materials, the price is above average. But they are worth it. Having bought such a coil, you can be sure that it will last a long time without any repair.

Another manufacturer of reliable reels is Mitchell, a French-based company specializing in the production of products for fishing. Among them are world-famous spinning coils such as Tuff-Body Spro ZaltArc XS. Solid, have protection against salt water, clutch protection from dirt and water, a cross-shaped line winding mechanism, spools with line clips and a special front drag system with fine tuning. If we add the original design to this, then these coils are rightfully considered the most reliable, despite their price, which corresponds to the quality.

It must be remembered that many manufacturers transfer their production to other countries and there such a coil is already produced under the brand name of another manufacturer, which does not always correspond to the quality of the original. Sometimes you can see coils without a logo. Hence the conclusion is to look at what you are buying and focus on buying goods from well-known companies.

How to choose a coil

First of all, you need to decide on the following conditions:

• fishing conditions;
• the weight and size of the bait;
• line thickness;
• rod ring size.

All these parameters must be coordinated with each other.

Also, when choosing an inertialess coil, you must pay attention to the following:

• handle play should be absent altogether;
• there should be no transverse play of the spool;
• the fishing line should be wound smoothly, lie down evenly;
• the line stacker should not spontaneously snap into place;
• the coil should not vibrate during rapid rotation;
• the freewheel switch and clutch must work clearly.

Do-it-yourself donka for catfish

catfish is one of the most big fish our reservoirs. Therefore, most fishermen are interested in catching such prey.

Big prey requires serious tackle, otherwise you will be left without one or the other. You also need to take with you a special and tasty bait. Such highlights are necessary for every fisherman who hunts for catfish.

You can catch such a predator by spinning, just on a reel or by trolling on bottom tackle. Since in this article we will talk about a do-it-yourself product, then we will talk about the second option.

To build a fishing gear for catfish, we need a rope or fishing line of special strength (0.5 - 1 mm in diameter), large hooks No. 10-40 and a fairly heavy load.

The design is very simple. We tie a load to the end of our cord, leashes are attached above it (by 30-50 cm), and we hook all this on a carabiner to the main fishing line. That's the whole scheme.

A piece of wood or foam can be used as a coil. In this case, the cord is tied to some tree or bush on the shore. If you use spinning (which is much more convenient for casting), then you need a large reel (4000 series) and reliable. It is important that the spinning itself is strong and rigid and can withstand a serious load.

The beauty of homemade equipment is that it is designed just for trophy catfish. Purchased inventory from the store sometimes fails at the most inopportune moment.

Now we will analyze all the elements of the equipment in parts.

When mounting your own design on a catfish, a braided or twisted twine plays the role of a fishing line. Pay attention to the fact that it is thinner than the sting. As a rule, the maximum load of such a whip is 30-35 kg. You should not waste time on trifles in the length of your cord, take it with a large margin of 50-100 m.

As for the load that will hold our bait at the bottom, it can be bought ready-made, or it can be cast from lead in the form of a cylinder. Knit it at a distance of 50 - 90 cm from the hook. The weight of the weight depends on the reservoir, on the river it is heavier 70-100 g, and in an ordinary reservoir 40-50 g is enough. such equipment options.

Hook is better to put one, but big. It can be made from thick wire (4-6 mm), or you can buy it in a store, which is much easier. They tie our “hook” through the hole where there are notches.

That, in principle, is all that is worth saying about this fishing tool. Now let's move on to some subtleties and baits.

Most often, catfish are caught at night, and in the morning they check their "traps". This is due to the fact that it was at this time that the predator actively hunts and scours the bottom in search of food.

For greater efficiency and to increase the fishing area, it is prudent to cast several donuts at different points. So you will not only increase your chances, but also find out where the barbel hunts most often.

The results of the spring and autumn fishing catfish are not particularly different, the only thing is that you need to change the bait, that is, to know when which one works better or worse. In the spring, he goes well for a bunch of succulent worms.

So we gradually came to key moment- what to catch? Catfish tastes change with age. Accordingly, small individuals prefer small prey (creeps, leeches or shells), the middle age category feeds on small fish, crayfish and frogs, and the most adult individuals are able to swallow large fish, water birds, mice and even animals.

As you can see, the choice is very large and even a piece of raw meat can be used as bait. The catfish does not particularly touch with animal food, as it is a scavenger.

Another problem that arises on a new reservoir, fishermen quite often face. This right choice fishing places.

Catfish like to "dig" in holes where it is warm and cozy for them. It is very easy to understand where there is a ravine. They are located on sharp turns of the river or near cliffs. The ideal option in the search there will be an echo sounder, but not everyone has it. And if you act the old fashioned way, then visually you can quickly determine such a place.

It is very effective to catch areas at the entrance and exit of the pits. If you got on it, then consider that you have found a gold mine. Also, be sure to remember your places, because the catfish usually does not change its hunting points and you can safely come here next time.

One night is enough for you to understand the location of the barbel, and then it's up to the small - choosing the right nozzle. You can also try to put a few "traps" near the shore, near the reeds, water lilies or under the trees.

As you can see, catching catfish on a donk is a bit unusual and different from traditional catching other objects. Homemade is always more reliable than purchased, and cheaper. Therefore, do not be lazy and try to do something with your own hands, in the end you will be satisfied with the result.

Do-it-yourself donk video for catfish

Predatory fish are mainly caught on spinning. And in addition, spinning fishing involves constant movement and change of lures, which makes it more exciting. Therefore, spinning fishing is preferred by most anglers.

Those who are just beginning to learn the intricacies of this art do not always know how to properly equip a spinning rod so that fishing brings not only pleasure, but also good prey. Indeed, despite the simplicity, such fishing has many nuances that you need to know.

What is spinning

Among the main elements of spinning are such as:

• Directly a spinning rod equipped with access rings;
• a reel for fixing the fishing line (there are inertia-free or multiplier);
• fishing line (also use a braided cord);
• · leash;
• artificial bait.

All these details have their own functions, which, one way or another, affect the reliability and functionality of the tackle in general.

Main characteristics

High quality spinning gear and, accordingly, fishing depends on the following characteristics: test load, length and action (or response to load). Also, not a key, but an important role is played by the material from which the rod and the design of the handle are made.

Test load

According to this characteristic, the weight range of lures is determined, which is recommended for a particular rod. . Spinning rods are divided according to this characteristic into several types:

There is also several not so common types of rods according to the test load:

1. Ultra Light, or ultra-light class allows a load of no more than 10 grams.
2. Medium Light (medium light class) - the load level ranges from 5 to 25 grams.
3. Medium Heavy, or medium-heavy class - allowable weight artificial bait from 15 to 40 grams.

Professionals recommend choosing a rod with a test load of 12 to 15 grams, if a light bait is used, then the rod test can be 8 - 10 grams. In this case, you should not go beyond the test load. If you use a heavier bait, then the rod may break, and it will be much harder to drive such a bait. If the bait is too light, it will be difficult to cast it for a considerable distance.

This is also an important characteristic on which the results of fishing depend. Measured mostly in meters, it is also possible to meet inches or feet. The length is calculated depending on the fishing conditions, the required casting distance and other factors. Wherein there are several types of spinning based on this feature:

Types of building

Action is the ability to bend a rod relative to the resulting load or resistance. Distinguish fast (under load bends only top part rods), medium (during the load, the rod bends up to half) and slow action (the majority of the rod is subjected to the load).

This characteristic is selected depending on the needs. For example, for perch fishing, light rods are often used - in order to cast the bait much further. But mainly rods with a medium action are used, as they are more versatile.

Material for manufacturing

They make spinning rods in most cases from various materials, including the following:

The choice of material from which the rod is made should be made based on the conditions and purpose of fishing.

Spinning handle

The handle is also an important part of spinning., which is made mainly from natural cork, leather and rubber.

There are two types of handles: solid and spaced apart (there are gaps throughout the handle design designed to lighten the rod). There are also single-handed and two-handed handles.

The type of handle does not have a big role in catching fish, but the long handle makes it easier to cope with the most crucial moment of fishing - playing.

At the bottom of the handle, with the help of a holder, a coil is attached.

How to choose the right coil

There are two types of reels for winding fishing line: inertialess (during the cast, the spool does not move at all) and multiplier (the spool rotates during the casting of the fishing line). Professional anglers recommend using the first option, as they have greater sensitivity and casting distance. They are also much cheaper than cartoons.

Among the characteristics are the following:

Having dealt with all the characteristics, you can understand how to properly use the inertialess coil.

Spinning line

For fishing with spinning, braided or monofilament line is usually wound on the reel. Among the advantages of monofilament fishing line it is worth noting the following:

• It is very conveniently laid in the spool;
• extremely rarely twists;
• very soft and elastic, which has a bad effect on the sensitivity of the bite.

This type of fishing line also has its drawbacks., which sometimes do not allow spinning to work normally:

• not strong enough, so it often breaks under heavy loads;
• Due to its elasticity, its service life is rather short.

Experienced anglers prefer braided line, despite the fact that it is much more expensive than monofilament. This is because the braid is much stronger and less stretchy, making it more susceptible to bites.

The scheme for winding fishing line on a reel is very simple. And it consists of just a few steps that answer all the questions of novice anglers about how to properly wind the line on the spinning reel.

First of all, you need to know how much line to put on the reel. Experienced anglers recommend to put on the line almost to the very end of the reel, leaving only a couple of millimeters. Further directly about the winding process itself:

These steps will help you figure out how to properly wind the line on a spinning reel. With multipliers, the situation is a little more complicated, therefore, in order to do everything right, it is better to watch video tutorials.

Leash for fishing line

Fishing with a spinning rod in itself implies hunting for a predator. Therefore, in order to fully equip the spinning, it is necessary to attach a leash to the fishing line. This is done so that the predator could not bite the main fishing line with sharp teeth.

Three types of leashes are made:

The leash is attached to the fishing line using the usual fishing knot which can be done by following the instructions below:

• you need to wind the fishing line onto the swivel using the rotation of the eye;
• the free end of the fishing line is threaded into the resulting loop;
• tighten the finished knot.

The choice of bait must be made taking into account that each bait is selected for a certain type of fish and fishing conditions. Below are most popular bait.

Types of rigs

If you know all types of equipment, then even a novice angler will be able to correctly assemble a spinning rod for fishing.

All these types of equipment are used for catching predatory fish. At the same time, for each fish, different kind spinning, equipment and bait. Knowing all these nuances, even a beginner in spinning fishing will be able to properly equip spinning.

Attention, only TODAY!

How Right wind the line on the trimmer spool?

Despite the fact that gardening equipment has been used for quite a long time, for some owners of private houses it is still a novelty. As a rule, how to wind the fishing line on a reel that can be opened when. That is why questions often arise about how to properly wind the line on an electronic or gasoline trimmer.

This is essentially a simple operation, but all its stages must be performed correctly in order to achieve desired result. How to install a coil on a trimmer. 03/28/2018 shaliris comments on how to install the coil. Moreover, in the operating instructions, only a few manufacturers give an answer to this sore point. Reel for trimmer mows how to install a reel on how to make a reel for. How to properly wind the fishing line on the reel photo of the steps to replace the fishing line c. Read the article and find out how the fishing line is wound on trimmer coil.

The order of winding fishing line on the trimmer spool

First of all, you should know that trimmers have different working nozzles. The reel can be designed for different lengths and thicknesses of fishing line - this point should be taken into account when purchasing consumables.

So, how to charge the fishing line in trimmer coil? All work is divided into several stages:

How to remove and install the coil on the lawn mower!

Subscribe to the channel! And we will teach you everything)))

How install mowing head and blade trimmer

How install mowing head and blade trimmer? Buy trimmer head: ? Buy.

When you turn on the trimmer, the excess line will be cut off by the trimmer blade.

As you can see, wind the fishing line around coil trimmer is easy: the main thing is to do everything Right. How to properly install a piston on a chainsaw And here are some more tips that will be useful to you when choosing a fishing line, winding it and subsequent work:

• fishing line comes in different thicknesses and with different sections. How to wind the line on the trimmer spool. First of all, you need to install after the trimmer belt on the trimmer? 1). The best option for winding is the “native” fishing line for this model;
• never use fishing line or metal cables on the trimmer. Such a replacement may seem effective, but it is very dangerous. Jumping off a running trimmer, the cable can seriously injure not only the lawnmower himself, but also those around him;
• the line is sheared when the running trimmer comes into contact with hard objects. How to wind the line on the trimmer spool correctly, if you have not done this before. ? How to install the mowing head and blade on the trimmer this video installation. Learn from the article how to properly wind the fishing line on the trimmer spool. Try not to let this happen, otherwise you will have to stop every time, turn off the device and rewind the line on the reel;
• use a regular line for cutting lawn grass, and a pigtail line for coarse weeds. How to wind the line on the reel correctly, you need to unwind 2-4 m of fishing line (depending on. It is more durable and will not be constantly cut off.