Frame pool intex 3.66 x 0.76 m. Buy a round frame pool
Intex 3.66x0.91m art.56930/28144 Intex
Just a few minutes - and a pond under the windows with clear water you're ready! Inflatable pools Intex Easy set Pools will be a great place to relax!
Article: 56930
Diameter: 366 cm
Height: 91 cm
Volume: 6.734 liters (80% full)
Dark-blue colour
Weight: 14.788 kg
Material: The walls are made of three separate layers: two layers of dense vinyl and one - outer - polyester for extra strength.
Installation: 10 minutes
Large, practical, made of modern material, inflatable pool Intex of the IZI series is an alternative to old pools with unstable side walls. The originality of the design makes it very easy to bring the Intex inflatable pool into working condition. Initially, the ring should be inflated with air. Then it is only necessary to fill the pool with water, and at the same time as the pool is filled, the ring will lift the walls, and the inflatable pool itself will take the form shown in the illustration.
The dimensions of the Intex Easy inflatable pool allow several people to be in it at once: both adults and children. Having bought a pool, inflatable or frame, bathing in perfectly clean warm water, you will forget about the sweltering heat and all your worries; take your children with you, call your friends, splash around, relax and gain strength. Installation of the Intex pool takes, depending on the type and model, from 5 to 45 minutes - and this is with filling! Pools for summer cottages can be placed anywhere, on any flat lawn. Don't forget about accessories: here you will find ladders, bedspreads, rubber rings and other leisure accessories.
Included:
Pool Intex 56930
- Instruction manual in Russian
- DVD with installation and dismantling instructions.
Our store sells Intex inflatable and frame pools.
Millions of people all over the world have already purchased the Intex trademark, and the number of sales of pools for summer cottages is growing every year, you can fulfill your dream of always having a simple and reliable solution for organizing bathing at hand.
In our store you will also find a wide range of various accessories for Intex prefabricated frame and inflatable pools, which will always be appropriate when using this swimming equipment in the country - bedding, awnings, stairs, heating blankets, all kinds of pool cleaning kits and much more.
The pool inflatable and frame Intex, purchased in our store, will bring a lot of pleasure to everyone who wants to freshen up, and will serve you for many years.
Frame pools Intex!
Frame pools Intex- a large selection of prefabricated pools different sizes and complete sets, from small round ones with a diameter of 305 cm to the largest rectangular ones measuring 975 x 488 cm with complete set equipment, including a chlorine generator. Frame pools are a real alternative to stationary pools. Pools are quickly installed, have different diameters and depths, do not require special training soil and do not spoil the landscape. The main advantage of frame pools is the ease of assembly, dismantling and storage. If on a hot summer day you want to swim in the courtyard of your dacha, frame pool- the best choice.
The prefabricated frame pool is quickly and easily installed. The process of assembling the pool before filling it with water takes only 45 minutes. The pool is made of high quality material with Super-Tough technology, which gives the pool walls triple strength. The walls are made of three separate layers: two layers of dense vinyl and one - polyester for extra strength. Maintaining the shape of the Metal Frame Pool is facilitated by a polypropylene tape encircling the entire pool. Also, the strength of the Intex pool is determined by its metal frame, thanks to which the pool can withstand heavy loads and several people can swim in it at the same time. The set includes a filter pump for water purification and all necessary accessories: ladder, awning, bedding. The filter pump provides recirculation and purification of water in the pool, which allows you to change the water no more than 1 time per month. A convenient drain valve attaches to a garden hose. Thus, water can be drained to any convenient place or, for example, to water the garden. The pool does not require soil preparation or sand filling.
Model: Intex 54424 
Characteristic:
* Pool Diameter: 3.66 m
* Pool Height: 0.99 m
* Volume: 9400 liters.
* Weight of packing: 41 kg.
The kit includes:
* Frame pool Intex 54424, 366 x 99 cm.
* Ladder height 107 cm.
Model: Intex 54946 
Characteristic:
* Pool Diameter: 4.57 m
* Pool Height: 1.22 m
* Volume: 16800 liters.
* Weight of packing: 70 kg.
The kit includes:
* Frame pool Intex 54946, 457 x 122 cm.
* Filter pump for water recirculation.
* Ladder height 130 cm.
* Awning for the pool.
* Bedding under the pool.
* Manual.
Model: Intex 58980
Characteristic: 
* Pool length: 260 cm
* Pool Width: 160 cm.
* Pool Height: 65 cm
* Volume: 2300 l.
* Weight of packing: 20 kg
The kit includes:
* Frame pool Intex 58980, 260 x 160 x 65 cm.
* Manual.
Inflatable pools Intex!
Inflatable pools Intex- a large selection of pools of different sizes and configurations, from the smallest with a diameter of 244 cm to the largest with a diameter of 549 cm with a full set of equipment, including a chlorine generator. Inflatable pools are a wonderful holiday in the country, convenience, reliability and safety. Pools are quickly installed, have different diameters and depths, do not require special soil preparation and do not spoil the landscape. Small inflatable pools are great for kids. If you want to take a dip in your backyard on a hot summer day, an inflatable pool is the best choice.
The pool of the Intex Easy Set Pool series quickly and easily is established without application of additional technical means(a screwdriver is only useful for installing the filter pump). The process of assembling the pool before filling it with water takes only 10 minutes. The base and walls of the pool are made of high quality blue PVC, Super-Tough technology gives them triple strength. Includes filter pump for water purification, installation instructions.
Model: Intex 56920
Characteristic:
* Pool dimensions: 3.05 x 0.76 m. 
* Volume: 3900 l.
* Weight of packing: 9 kg
The kit includes:
* Frame pool Intex 56920, 3.05x.076 m.
* Manual.
Model: Intex 56930
Characteristic: 
* Pool dimensions: 3.66 x 0.91 m.
* Volume: 6700 l.
* Weight of packing: 15 kg
The kit includes:
* Frame pool Intex 56930, 3.66x0.91 m.
* Manual.
Model: Intex 56970
Characteristic:
* Pool dimensions: 2.44 x 0.76 m.
* Volume: 2500 l.
* Weight of packing: 7 kg
The kit includes:
* Frame pool Intex 56970, 2.44x0.76 m.
* Manual.
Inflatable pool Intex 56475
Children's inflatable pool "Family" with transparent outer walls, drainage in the floor and seats for relaxing or watching children. There are 2 drink holders on the sides of the pool. The pool is made from durable vinyl. Several children and adults can swim in it at the same time.
Pool dimensions:
229 x 229 cm. 
Pool Height:
66 cm
Pool capacity:
882 l.
Maximum water level:
36 cm
Weight of packing:
7 kg.
Round frame pool are the best choice if you plan to relax in the country. The purchase of such a design will allow you to perfectly relax, as well as get a lot of pleasant moments. Minimum time and effort is required for installation, because a pool of this type does not require additional or special storage conditions, a long and tedious installation. Round pool Intex differ in area and volume. In diameter, they can be from 305 to 569 cm. The height can vary from 76 to 132 cm. Buy a round frame pool intex simple enough. In addition, there is an additional complete set of models:
- Additional overlays.
- Ladders for ascent and descent.
- Water filter pumps.
- Special kits for cleaning the bottom.
Modern pools get an extra sand filter, which qualitatively purifies water, unlike filter cartridges. To disinfect the water and make the bathing process more pleasant and safe, are used additional funds in powder, liquid or tablet form.
The bowls of such a pool will be made of PVC, which has two layers. Additionally, a reinforced mesh is used. The metal steel frame also receives maximum resistance to corrosion and damage, because it has a special coating.
Manufacturer: Bestway (PRC)
Vendor code: 56088
The soft body of the pool, fixed on a metal frame, is easy to install and safe for children (under adult supervision). With a height of 122 cm and a depth of 110 cm makes it comfortable for adults and children school age. The pool is installed in about 30 minutes, in three stages. The pool is completed with convenient accessories: a ladder, a filter with a pump, a cover, a manual on DVD, a pad under the bottom of the pool.
Sizes of the Bestway Frame Pool 56088:
Round frame pool Bestway Frame Pool 56088:
1. Required volume of water, at 90% filling: 10,230 liters
2. Article of the cartridge: 58094-2
3. Filtration pump with cartridge: cartridge, capacity 2.006 liters/hour, 29 W, IPX5;
4. Package size: 115x39x47 cm
5. Instruction
6. Material of the pool bowl: a layer of polyester reinforced with an additional two layers of laminated PVC
7. Filter hose connection diameter: 32mm (1.25")
8. Weight: 47.67 kg
Contents of delivery frame pool Bestway Frame Pool 56088:
1. Pool bowl;
2. Filter pump (Bestway art. 58148) with filter cartridge;
3. Operation manual.
4. Ladder 4 steps, 122 cm (Bestway art. 58097)
5. Bedspread (Bestway art.58037)
6. Pool mat (Bestway art. 58002)
Selecting an installation site frame pool Bestway frame pool:
The pool must be installed on a completely flat and level surface, without slopes.
. The selected area must evenly bear the weight of the pool, the area must be level and free from foreign objects, including stones and branches.
. Do not level the surface with sand; remove or add soil if necessary.
. Do not install the pool on driveways, decks, platforms, gravel or asphalt. Selected plot
must be hard enough to withstand water pressure; sand, soft or loose soil.
. We recommend removing all grass from the site chosen for installation, especially aggressive plant species - weeds can grow through the bedding or lining.
Assembling the frame pool Bestway Frame Pool:
Bestway Inflatables accepts no responsibility for pool damage caused by mishandling or failure to follow these instructions.
1. Lay out all the components and check that their quantity corresponds to the parts specification.
2. Lay out the pool right side up. Leave it in direct sunlight for about an hour to make it more elastic, which is convenient when assembling.
3. Install the pool next to a suitable drain system, make sure that inlet "A" and outlet "B" of the pool are correctly positioned to allow the filter pump to be connected to the mains.
NOTE: Do not use extension cords to connect the pump to the mains.
ATTENTION! Do not drag the pool on the ground as this may damage it.
NOTE: The bottom of the pool must be properly laid - no wrinkles.
4. Insert the stopper plugs into the inlet A and outlet B located on the inner wall
pool.
5. Assemble the pool frame from all the elements included in the package according to the instructions and the instruction drawing.
ATTENTION: Make sure that all frame supports are at the same level before and after filling the pool with water! It is unacceptable to skew the supports of the racks, otherwise it will cause a rupture of the pool bowl, which deprives you of the guarantee.
6. Make sure the drain valve is securely closed. Level the bottom.
7. Pour some water (2.5-5 cm) into the pool so that it covers the floor, gently smooth out all the wrinkles in a clockwise direction from the center to the side.
Filling frame pool Bestway frame pool water
CAUTION : Do not leave the pool unattended when it is filling with water.
1. Fill the pool with a low pressure of water to the level of the lowest valve leading to the pump, taking into account the volume of people bathing, DO NOT OVERFILL Eat it with water, it can collapse.
2. Upon completion of filling the pool, check that the filling is even in relation to the top edge of the walls.
IMPORTANT ! If the pool is not level, drain the water and level the area by digging into the ground. Never try
move the pool with water in it, you may be injured or damage the pool.
WARNING: If one of the pool walls is uneven or has a bulge, the pool is not level and the walls could suddenly break, resulting in personal injury or property damage.
3. Check the pool for leaks at the seams and in the places where the valves are installed, check the bedding for any
obvious signs of running water. Do not add chemicals to the pool until you are sure there are no leaks.
NOTE. In the event of a leak, seal the pool with the repair patch supplied.
4. Check the filter cartridge regularly, replace it when clogged and discolored. It is recommended to change the cartridge every 2 weeks.
Swimming pool Intex 28210 for children will help to diversify summer holidays in the country, will serve for hardening and physical development child. Also, its size allows you to safely learn to swim. With a low height of 76 cm, you can watch the children, enter the bowl easily. The diameter of 3 m 66 cm is sufficient for the installation of children's water slides, swimming on mattresses and inflatable wheels. Even an adult can fit in that amount of space.
The pool holds 6500 liters of water and is filled with a garden hose. There is a valve for draining. Installation Intex 28210 takes no more than half an hour. Thanks to the video instruction, you will quickly learn how to assemble the pool and take care of it.
The film of the bowl is made of a durable 3-layer canvas - an outer polyester layer and 2 inner vinyl ones. The kit includes repair materials with an adhesive coating that can be glued to the rupture site directly in the water.
Intex Metal Frame 28210 has a metal tubular frame covered with protective galvanization. It is durable, does not bend or break. For stability in a circle, the beams are fastened with a polypropylene tape. The total weight of the pool without water is only 25 kg.
Show all description
Characteristics
pool typechildren's, prefabricated, frame, family Volume 6500 l Form round Color blue Height 76 cm Width 366 cm Weight 25 kg MaterialMetal, polyester, vinyl, PVC Hydromassage No
Equipment:
Manual Yes Instruction DVD Yes Pump No Ladder No repair kit Yes drain valve Yes Awning No Pool liner/underlay No
Show all characteristics
Price: Descending Ascending Delivery: Russia
Prices 3
Pool frame Intex Metal Frame 28210/56994 RUB 7,030 4 720 rub.reviews (43)To the store Intex Frame pool Metal Frame 366x76 cm, 6503 l 28210 RUB 7,030 green ball To the store
