Boats frigate m 5 color grey. Inflatable boats Mnev and Cayman

The hull of the Frigate inflatable boat is made of multilayer PVC boat fabrics from the German manufacturer MehlerTehnologies, which significantly extends the life of the boat. Due to the material, a PVC boat is suitable for operation in various conditions - in quiet enclosed waters, on a wave or on rapids of shallow rivers, among snags and reeds.
The welded seams of the Frigate M-5 PVC inflatable boat are made using hot air welding technology, which guarantees increased strength and durability of the seams, as well as reliability and safety on the water for passengers compared to glued seams.
An inflatable boat made of PVC consists of one closed cylinder, divided by partitions into 2 compartments, while the partitions are under the swivel oarlocks, so even if one of the compartments is damaged, it remains possible to use oars, and most importantly to ensure your safety, the boat remains afloat .
Cast holders are installed along the sides inside the hull, in which the seats for passengers are rigidly fixed, which prevents them from jumping out and shifting. Stationary banks are a guarantee of your safety on the move: the banks will not jump out of the grooves, and at the same time the ideal weight of the boat is maintained.
The rowing boat Frigate M-5 has smooth contours and is designed with a raised bow, which allows it to have excellent survivability on the wave and easy oaring at high speed, and also prevents the boat's cockpit from being splashed by the wave.
Lightweight collapsible aluminum oars with plastic blades of the rowing boat Frigate M-5 always stay afloat and allow people of different heights to comfortably control the boat.
For towing an inflatable boat made of PVC, a lifting eye is installed on the bow. As additional equipment inflatable boat Frigate M-5 can be equipped with an inflatable bottom, sleighs or rack floorboards.
The rowing boat Frigate M-5 is equipped with a mount for a mounted transom for installing an outboard motor up to 4 hp. inclusive, which makes it universal for use in various situations.
All Frigate inflatable boats are equipped with new improved carrying bags: reinforced PVC bottom, more wear-resistant Ultra caprovinyl material, a side pocket for oars made the bag-backpack even stronger, and Frigate boats are even more convenient to carry and store.

The inflatable rowing boat Frigate M-5 is distinguished by an increased diameter of the cylinders and an increased cockpit area, and hence spaciousness, which makes it an excellent choice for those lovers of water recreation who care about safety and need a large space for equipment and comfortable accommodation. The boat also has excellent maneuverability, handling and low weight.

The inflatable boat is packed into a convenient backpack and is easily carried by one person.

The dimensions of the cockpit of the PVC rowing boat Frigate M-5 are 2200 x 660 mm.

NOTE! Frigate boats - do not require registration with the GIMS if you install an outboard motor with a power of up to 8 kilowatts (10.88 hp) inclusive on the boat.

foot pump (pump);

boat type	Rowing
Color	Gray / Green
Boat length (cm)	300
Boat Width (cm)	144
Bead diameter (cm)	40
Cockpit length (cm)	220
Cockpit width (cm)	64
Number of sealed compartments	2
Passenger capacity	2+1
Load capacity (kg)	360
Maximum motor power (hp)	4
Boat weight (kg)	17,5
bottom type	stretch PVC
Transom	Mounting under the canopy
Seat mounting type	Stationary (not mobile) / Mobile (lyktros-likpaz)
Type of seams	Welded
PVC fabric	Reinforced 5-layer
Do I need to register with GIMS	No
Purpose	For fishing / For hunting / For the river
Manufacturer country	Russia, St. Petersburg

Inflatable rowing boat for a motor - Frigate M-5 is a modern, compact, easy-to-handle, reliable and most spacious rowing boat in its class with a mount for a mounted transom for installing a boat motor up to 4 hp, designed for fishing, hunting and recreation on rivers and lakes.

The M-5 frigate is a rowing boat powered by a new modern series of welded rowing boats Frigate with an updated hull shape, increased cockpit size, capacity and carrying capacity, manufactured using advanced technologies. All seams of the Frigate inflatable boat are made using modern technology hot air welding, which guarantees increased strength of the seams and provides inflatable boats Frigate with a long service life and safety appearance during the most intensive use, and passengers safety

The hull of the inflatable boat is made of multilayer PVC boat fabrics from the German manufacturer MehlerTehnologies, which significantly extends the life of the boat. Due to the material, a PVC boat is suitable for operation in various conditions - in quiet enclosed waters, on a wave or on rapids of shallow rivers, among snags and reeds.

The welded seams of the Frigate M-5 inflatable boat are made using hot air welding technology, which guarantees increased strength and durability of the seams, as well as reliability and safety on the water for passengers compared to glued seams.

An inflatable boat made of PVC consists of one closed cylinder, divided by partitions into 2 compartments, while the partitions are under the swivel oarlocks, so even if one of the compartments is damaged, it remains possible to use oars, and most importantly to ensure your safety, the boat remains afloat .

A new modification of the PVC inflatable boat Frigate M-5 is equipped with one of 2 absolutely reliable options for mounting seats (cans):
- seat fastening system lick-groove / lick-cable, which allows you to move the cans along the length of the cockpit, depending on the operating conditions;
- a system for fastening cans, securely fixed in molded holders along the sides inside the hull, preventing jumping out and displacement of the seats even in the most extreme conditions.

The rowing boat Frigate M-5 has smooth contours and is designed with a raised bow, which allows it to have excellent survivability on the wave and easy oaring at high speed, and also prevents the boat's cockpit from being splashed by the wave.

The oars of the rowing boat Frigate M-5 are equipped with adjustable clamps, which makes it possible to comfortably control the boat for people of different heights. Lightweight collapsible aluminum oars with plastic blades always stay afloat.

For towing a boat made of PVC, an eye is installed on the bow. As additional equipment, the Frigate M-5 inflatable boat can be equipped with an inflatable bottom, sleighs or rack floorboards.

The rowing boat Frigate M-5 is equipped with a mount for a mounted transom for installing an outboard motor up to 4 hp. inclusive, which makes it universal for use in various situations.

Inflatable rowing boat Frigate M-5 is equipped with reliable and modern fittings:

Reliable mounts (power washers) under the hinged transom for installing an outboard motor up to 4 hp;
a handrail belt that provides passenger insurance and the possibility of convenient carrying of the boat;
light aluminum paddles with removable blade
effective rotary oarlocks, greatly facilitating the process of rowing.
anchor eye mounted on the bow of the boat.
foot pump (pump);
as additional equipment, rowing boats are equipped with an inflatable PVC bottom, a hinged transom for installing an outboard motor, slats or a slatted floorboard:

All Frigate inflatable rowing boats are equipped with new improved carrying bags: reinforced PVC bottom, more wear-resistant Ultra caprovinyl material, a side pocket for oars made the bag-backpack even stronger, and Frigate boats are even more convenient to carry and store.

The dimensions of the cockpit of the PVC rowing boat Frigate M-5 are 2200 x 660 mm.

NOTE! Frigate boats - do not require registration with the GIMS if you install an outboard motor with a power of up to 8 kilowatts (10.88 hp) inclusive on the boat.

Developer: Grigorovich
Country Russia
First flight: 1915

During the summer and autumn of 1914, several flights were made on the M-2 flying boat, which showed that further work was required to improve the aircraft layout. The next flying boat M-3 was not entirely successful either. In essence, this is a somewhat modified M-2 with a more powerful 100 hp Gnome Monosoupape engine. The hull of the boat remained the same, but the profile of the wings was changed once again. Test flights showed that even with the new layout, the seaplane's flight data, compared to the M-2, did not improve. The seaworthiness of the boat also remained unsatisfactory. Grigorovich's next boat, the M-4, did not shine with its data, in fact, a modified version of the M-3, with the same engine. They only changed the wing profile and slightly modernized the hull of the boat, and the stabilizer was made with a screw lift, which made it possible to change the angle of its installation in flight. It should be noted here that the difficulty of designing seaplanes lies in the fact that, in addition to the aerodynamic qualities inherent in any aircraft, a seaplane must also have specific properties: buoyancy, stability, unsinkability and seaworthiness. From M-1 to M-5, the aircraft designer had to literally touch the optimal variant of the designed aircraft. This is the special merit of Dmitry Grigorovich and his great success in creating an outstanding model of the M-5 flying boat for that time, which went down in the history of domestic and world aviation.

The double flying boat M-5 was released in the spring of 1915, and already on April 12 it made its first sortie. In the future, until 1923, the boat was built in series. In total, about 300 aircraft of this type were produced. Grigorovich managed to optimally combine the high seaworthiness of the boat hull with the excellent flight data of the aircraft in the M-5. A runway for the apparatus could be a water surface with a wave height of up to 0.5 m. The carefully profiled bottom of the boat did not “stick” to the water and was easily separated from it during takeoff. Landing speed was only 70 km / h. Double flying boat M-5 with a 100 hp Gnome Monosoupape engine. developed a maximum speed near the ground of 105 km / h. Practical ceiling - 3300 m, flight duration - 4 hours. The geometric data are as follows: the length of the aircraft is 8.6 m, the wingspan is 13.62 m, and the area of the wings is 37.9 m2. The takeoff weight of the aircraft is 960 kg, the payload is 300 kg. M-5 remained in service for a long time: first as a naval reconnaissance aircraft, and since 1916 as a training vehicle.

What improvements did the designer apply in this aircraft compared to previous models? First of all, the area of the lower wing has been increased. The redan of the boat remained concave, but its height was reduced in the center - up to 70 mm, and along the sides - up to 140 mm. The cheekbones on the redan are equipped with skids, with the help of which the seaplane could get out of the water to the descent site. M-5 had good seaworthiness, was light and easy to manage. There were no weapons on the M-5 scout. In rare cases, a machine gun was installed in front of the right seat. The design of the M-5 hull is typical for other Grigorovich seaplanes. The frame of the boat was made of ash, sheathing - plywood, with a thickness of 3 mm along the sides, and on the deck up to 5-6 mm. Redan on the bottom of the bill of 10 mm plywood. Sometimes, for the strength of the hull, the thickness of the skin in the middle part reached 5 mm.

The assembly of the case was carried out on brass screws and coated with lead or zinc white. Plywood strips on copper rivets were placed at the joints of the hull skin. Some seams and joints of plywood were upholstered on the outside with copper foil and soldered with tin. Outside, the hull of the boat was covered with a colorless varnish, inside - drying oil. The power set of the boat's hull consisted of frames, and diagonal braces were placed in places, the transverse and longitudinal set were connected with clamps made of 3 mm plywood. In addition, a special “sea glue” and a special solution of cottage cheese in ammonia were used during assembly, which increased the hydroresistance of the glued joints. The wooden parts were fastened with screws, it took up to 15 thousand of them for the entire hull of the boat. All work was done by hand.

The design of the wings is two-spar, braced, very thin profile - about 4% of the wing chord. The upper and lower wings are connected crosswise with metal braces and, in addition, such braces connected the wings to the bow of the boat.

The rudder and aileron control cables are routed outside the boat and wings. The tail unit, located above the curved tail of the boat on racks of metal pipes, was very light and not rigid: the “tail” twisted noticeably on a turn, trembled from blowing with a propeller, but never broke.

The stabilizer is wooden, with struts for the rear spar, also connected by metal braces to the keel. The angle of installation of the stabilizer could be changed before the flight. The rudders and keel are welded from thin-walled steel pipes with several wooden ribs and covered with fabric.

The star-shaped air-cooled engine was mounted on the central pillars of the wing box on a sheet frame with additional support under the engine toe. Gasoline was supplied to the engine under pressure from the tank due to the excess air pressure created using hand pump. The fuel tank itself was located behind the cockpit.

The M-5 flying boat is a well-thought-out harmonious design with a successful aerodynamic profile and sufficient wing area, which ensured good flight data for the machine. The successful combination of the power plant with the size and weight of the aircraft provided simple and safe control in the air. The boat provided a sufficient margin of safety during normal operation and made it easy to take off from the water during takeoff, and had taxiing stability. Such qualities of the aircraft were the best suited for a training aircraft. However, the flight performance of the M-5 remained still low, the maximum speed - just over 100 km / h - is clearly insufficient for a combat vehicle.

Nevertheless, I would like to note once again that the layout of the aircraft and the successful combination of all structural elements with the placement of the power plant put the M-5 flying boat among the outstanding creations of its time. Interestingly, Grigorovich repeatedly tried to improve the flight performance of the M-5 by installing a more powerful engine, but this only backfired...

Modification: M-5
Wingspan, m: 13.62
Length, m: 8.60
Height, m: 3.40
Wing area, m2: 37.90
Weight, kg
- empty aircraft: 660
- normal takeoff: 960
Engine type: 1 x PD "Gnome Monosoupape"
- power, hp: 1 x 100
Max Speed, km/h: 105
Cruise speed, km/h: 87
Flight duration, h.min: 4.0
Maximum rate of climb, m/min: 78
Practical ceiling, m: 3300
Crew: 2
Payload, kg: 160
Armament: 1 x 7.62 mm machine gun.

Flying boat M-5 is taxiing to take off. 1915

Flying boat M-5. Embankment of Krestovsky Island, St. Petersburg, 1915

One of the first M-5 flying boats with serial number 331.

Flying boat M-5 from the aviation of the Black Sea Fleet. 1916

Flying boat M-5 starts to take off. Baku officer school of naval aviation. 1916

Flying boat M-5 in flight.

Flying boat M-5 taxis to the pier.

Flying boat M-5 of the Baku officer school of naval aviation. 1916

Flying boats M-5 of the Baku officer school of naval aviation. 1916

Flying boats M-5 of the Baku officer school of naval aviation on the descent of the Old Customs Quay.

M-5 Baku officer school of naval aviation. 1916

On the 2nd plan M-5 at the parking lot of the flying boat detachment of the Baltic Fleet. Helsingfors. 1916

M-5 after launching.

The rise of the flying boat M-5 on board the cruiser "Almaz".

Magazine "Wings of the Motherland" No. 12, 2000 Alexander Beloborodko. The firstborn of Russian flying boats.
Magazine "Aviation and Cosmonautics" No. 5, 2012 Mikhail Maslov. Planes of Dmitry Grigorovich.
Special issue of the almanac "Typhoon", 2012

Manufacturers of boats for fishing and hunting every year produce improved reliable models for a comfortable and unforgettable vacation.

Our official Rumpelland boat shop is pleased to offer you the best high quality hunting and fishing boats at affordable prices. They are very easy to use and transport, have high puncture resistance, strength and stability, and, most importantly, are inexpensive.

In our store, you can choose from both rowing boats and motorized boats, i.e. motor-rowing.

Our online store has the widest catalog of inexpensive, but high-quality PVC boats from the following manufacturers:

Aqua	Apaches	Gladiator	Corsair	marlin	Mnev and K	Neptune	Our boats
Polar Bird	Poseidon	Profmarine	Regatta	Riviera	Reef	Sia-Pro	Solar
Arrow NN	Taimen	Phoenix	flink	Fort	Frigate	hunter	Stormline

Inflatable boats Profmarine (Profmarine)

Profmarine boats are distinguished by practical design and great functionality. The developers decided to raise the nose high, but keep the standard tank width along the entire length of the hull. Thus, the useful area of the cockpit has increased, which has increased the comfort of boat trips and fishing.

Advantages: low weight, due to the low density of PVC (from 750 g/m2 to 1200 g/m2); the bottom, transom and banks are made of durable waterproof plywood; quickly goes on planing with the help of a modified stern; high handling and smooth wave passage due to the rigid keel.

At the same time, the boat is large, so there will be room for additional things in the cockpit.

Inflatable boats Mnev and Cayman

If you want to buy a boat for fishing, then Mnev and Cayman is a good solution. This is a domestic manufacturer, so the cost of models is lower than that of imported counterparts. At the same time, the quality remains high, which made it possible for the company to gain high popularity.

Advantages: high reliability; good maneuverability in small waves; high stability on water; excellent seaworthiness, even in extreme situations.

Inflatable boats Poseidon

Poseidon are boats for a variety of purposes. Some models are designed for the quiet environment of a closed pond with calm water, others for extreme use at sea.

Advantages: a number of models, each of which has its own purpose; high quality materials; the ability to carry a large load; the most practical and functional design.

Inflatable boats Gladiator (Gladiator)

Gladiator is a series of Chinese boats designed for traveling and recreation on the water. Models are light, have sufficient strength and stability for use on rivers and reservoirs.

Advantages:

1. The Light series is the basic model for a relaxing holiday in enclosed waters or calm rivers;

2. Active - universal inflatable boats for fishermen or hunters with a reinforced bottom, equipped with a splash guard and protection of the stern from splashes when the engine is running;

3. Professional designed for use in extreme conditions (fast rivers or sea).

Inflatable boats Riviera

Riviera PVC boats are versatile models that offer amazing sailing performance with increased payload thanks to larger tanks and a slightly redesigned overall design. They have good handling and stability at high speed.

Undoubted advantages: inflatable keel, which improves maneuverability when planing; wave baffle increases comfort and safety at sea with large waves; camouflage for concealed movement, and black and white to reduce the heating of the hull under the sun.

Inflatable Boats Hunter

Domestic manufacturer "Hunter" offers inflatable boats different type. Each series has its purpose and features. Some have high stability in high waves, others are better suited for leisurely trips through calm waters. But, in any case, each series is very reliable, durable and made of quality materials.

Advantages: relatively small weight of a deflated boat; durable PVC fabric, puncture and tear resistant; functional design.

Inflatable boats Frigate

Frigate has been developing boats for over 15 years, constantly improving its products. Models are suitable not only for a relaxing holiday, but also for hunting, and even for sports competitions. Therefore, it is not surprising that they regularly win prizes in competitions.

Advantages: high reliability of a design; durable PVC fabric; high maneuverability and stability on the water.

It is not surprising that the Frigate received high marks during the tests and certification of the Ministry of Emergency Situations. Rescuers appreciated the capabilities of such boats.

Inflatable boats Marlin (Marlin)

Marlin develops reliable boats with original appearance and functionality. Each vessel is distinguished by its really light weight, affordability (the price is low), and good driving performance.

Advantages: durable and lightweight aluminum bottom; well-defined keel, which facilitates maneuvering at high speeds; movable wooden seats; separate bags for transporting the boat in disassembled form; reliable Italian air valves, protected from sand and dirt.

Moreover, each series has some additional features that make it more suitable for fishing, hunting or traveling in a large company.

Inflatable boats Corsair

Corsair - high-quality boats made from reliable and modern materials. With their help, you can make an unforgettable walk along the river or go out to sea for fishing.

Advantages: good seaworthiness; the presence of several chambers in cylinders to increase safety; stability on the water even with waves; the strength of the fabric to punctures in case of accidental collisions with tree debris or sharp stones.

Inflatable boats Neptune

Neptune offers modern boats that are easy to transport and store as they take up little space when deflated. At the same time, ships are quickly assembled even alone.

Advantages:

1. Modern and reliable type of butt-to-butt joint, with mandatory reinforcement of each side;

2. Cylinders have partitions dividing them into sections, which increases safety on the water in case of accidental puncture or rupture (the boat will remain afloat, even after being damaged);

3. A computer with a laser machine is used for cutting, which improves the accuracy and quality of parts;

4. PVC fabric from global manufacturers.

In addition, boats are able to serve even at very extreme temperatures - from "plus" 70 to "minus" 30 degrees Celsius.

Inflatable boats Solar (Solar)

Boats from Solar have a number of features that distinguish them from competitors. First and foremost, they are designed for use in Russia, so they are most suitable for our conditions, including temperature extremes and severe winters. The manufacturer has developed several different series, each with its own characteristics of operation and use.

General advantages: low cost; high strength; good stability even with strong excitement; excellent handling.

Solar is the best choice for the fisherman or hunter who prefers company.

Inflatable boats Sia-Pro (Sea-Pro)

Sea-Pro uses a special five-layer PVC, which makes the boats more durable than their counterparts. The use of rack payol gives high strength to the bottom (it is easier to stand on it), plus it better withstands mechanical damage during accidental collisions with underwater obstacles.

Advantages: resistance to some aggressive chemical components; low draft (with a minimum load, even shallow water is easy to pass); there are no special conditions for storage.

Inflatable boats Aqua (Aqua)

Boats from Aqua belong to the budget segment of the market and are really cheap. Outwardly, they are not particularly remarkable, but they are distinguished by reliability, durability, easy storage and quick assembly.

Advantages: several types of bottom (inflatable keel, flat bottom); durable payol made of moisture-resistant plywood; the tape is equipped with a wave baffle running along outside balloon, which facilitates walking on the sea with medium waves.

Inflatable boats Fort (FORT)

If you need high-quality and reliable boats, then FORT will become good choice for fishermen or hunters. It is also suitable for lovers of water walks. It should be borne in mind that a number of models are designed exclusively for one person, but some can comfortably accommodate two.

Advantages: high resistance to aggressive atmospheric factors; ease of use, storage and maintenance; slight draft, facilitating the passage of shallow water; the presence of a rigid can between the sides; high stability, thanks to a balloon with a diameter of 36 cm.

Inflatable boats Taimen

Taimen boats are the best for sailing under a motor or on oars, in winding rivers with a fast current. The sides are protected from abrasion, the bottom is durable and well withstands mechanical damage in case of accidental contact with underwater obstacles.

Advantages: has an additional reserve of buoyancy, which increases safety on the water; freely fits in the trunk of a passenger car in a deflated state; quick assembly and disassembly (about 15 minutes, when working alone).

Inflatable boats Phoenix

Phoenix boats are new on the market. All boats are distinguished by low price, high practicality and functionality. They are a good choice for fishermen or hunters who like to spend their free time in small companies. At the same time, thanks to the design features, a really easy move on the oars is ensured.

Benefits: Rigid plywood cans can be easily moved for greater comfort; the cockpit is wider than similar models from other brands; the diameter of the balloon is 36 cm, which increases the buoyancy and carrying capacity; when using it, there is no need to register with the GIMS.

Inflatable boats Bullfinch (Polar Bird)

Practical Polar Bird or Bullfinch boats are high-quality and reliable models that can last a really long time. They are easy to operate, can be used for transporting goods, hunting, fishing and just boat trips.

Undoubted advantages:

1. Solid and reliable design, able to withstand even strong sea waves, without loss of driving performance or stability;

2. The strength of the materials makes it easier to endure trips along fast rivers with strong currents and the presence of pitfalls;

3. Easy and quick to assemble without requiring the help of a second person.

Inflatable boats manufactured by NPO Our Boats

NPO Our Boats offers quality products. The material undergoes additional processing, so that the models endure ultraviolet radiation and do not heat up much in direct sunlight, even in the hot summer sun. Therefore, they are loved by many fishermen who prefer a leisurely fishing in quiet backwaters.

Advantages:

1. Five-layer material with reinforcement from the German company "Mehler Haku" and the Finnish "Skantarp";

2. Manual connection of seams, which guarantees their reliability and quality;

3. Unique balloon design (variable diameter, narrower at the bow and widening towards the stern) for faster planing.

Inflatable boats Flinc (Flink)

Flinc boats are valued by fishermen or hunters who need to get to water bodies for a long time by transport. They are really compact when folded, weigh little and are easy to assemble.

Advantages: durable fabric from the well-known German company HEYTEX; high quality components; easy rowing; excellent maneuverability and stability; a backpack for transportation and a practical foot pump.

Arrow NN (RIB folding)

Folding RIB Strelka are reliable boats that have a low cost, but meet strict European standards. Models are suitable for water tourism, fishing or hunting.

Pros: resistance to wear; durability provided by original design solutions; compact size and optimal weight of the boat; excellent level of maneuverability, practically independent of weather conditions.

Which boat to choose for fishing and hunting

First, find out for what purposes you need it, how much water you will plow on your new vessel, how many people you will transport, how transportation will be carried out to the place of fishing or hunting and back.

For smaller waters, a rowboat is the way to go. If you need to buy a unit for large lakes, rivers, or if you like to ride with the breeze, get a motor-rowing boat.

The main parameters to be followed when choosing a PVC inflatable boat:

Size and weight- you can buy an inflatable boat made of polyvinyl chloride of different weight categories and dimensions:
- weight - 7-125 kg. Please note that in all technical specifications the weight is indicated without taking into account the floorboard, oars, etc. The weight depends on the dimensions of the vessel and the materials from which it is made. A well-known fact is that PVC boats (light and practical, the color does not fade, they are highly resistant to ultraviolet radiation) are much lighter than rubber samples. When choosing heavy boats, do not forget to measure your strength when moving the vessel;

Width (100-240 cm) and length (190-555 cm)- the longer the vessel, the better the downforce and the faster the speed to the glider. Usually single boats have a length of up to 3 m. Even if the manufacturer indicates that up to 4 people can fit on such vessels, one fisherman will be comfortable in it, taking into account the equipment. If manufacturers indicate that with a length of 3-4 meters it will fit 6 people, then in practice comfort is provided to 3 passengers. Inflatable boats over 4 meters are heavy, require the installation of outboard motors from 30 hp.

bottom type- in our store there is a large catalog of boats with "soft (inflatable)" and "hard" bottom.

Inflatable bottom - the main advantages: quick assembly (you can inflate it in 10 minutes), you can stand on it, it is easy to transport, it increases the speed of getting on the glider. Cons - a little soft, still prone to punctures with sharp objects.

- "hard" bottom - the main advantages: less "traumatic", strong, it is very convenient to stand on it, a vessel with such a bottom has rigidity in motion. Cons - the laying time of the bottom is at least 30 minutes, greater weight and dimensions.

Passenger capacity- we sell PVC inflatable boats for one person and groups of people up to 10 people.

The maximum power of the outboard motor- in our official online store you can buy an inflatable boat with a maximum allowable motor power from 2.5 to 50 hp:

Length 2.0-2.7 m - for 2.5-3.5 hp outboard motors

Length 2.7-3 m - for 3.5-6 hp outboard motors

Length 3 m. and longer- for 5-40 hp outboard motors.

PVC boats have a lot of options to choose from. Remember that the most important thing when choosing is safety - you must not allow the boat to be lifted onto the "cobra", and, as a result, the captain, passengers and outboard motor will be overboard.

The novelty of the 2012 season is the two-seater rowing boat Fregat M-5 is the most spacious inflatable boat in its class with a mount for a mounted transom to install a boat motor up to 4 hp. inclusive and intended for fishing, hunting and recreation on small reservoirs.

1. The hull of the boat is made of multilayer PVC boat fabrics from the German manufacturer MehlerTehnologies, which significantly extends the life of the boat. Due to the material, the boat is suitable for use in various conditions - in quiet enclosed waters, on a wave or on rapids of shallow rivers, among snags and reeds.

2. Welded seams of the Frigate M-5 boat are made using hot air welding technology, which guarantees increased strength and durability of the seams, as well as reliability and safety on the water for passengers compared to glued seams.

3. The boat consists of one closed cylinder, divided by partitions into 2 compartments, while the partitions are under the swivel oarlocks, so even if one of the compartments is damaged, it remains possible to work with oars, and most importantly to ensure your safety, the boat remains afloat.

4. Cast holders are installed along the sides inside the hull, in which the seats for passengers are rigidly fixed, which prevents them from jumping out and moving. Stationary banks are a guarantee of your safety on the move: the banks will not jump out of the grooves, and at the same time the ideal weight of the boat is maintained.

5. Rowing boat Frigate M-5 has smooth contours and is designed with a raised bow, which allows it to have excellent wave survivability and easy oaring at high speed, and also prevents the boat's cockpit from being splashed by waves.

6. The oars of the rowing boat Frigate M-5 are equipped with adjustable clamps, which makes it possible to comfortably control the boat for people of different heights. Lightweight collapsible aluminum oars with plastic blades always stay afloat.

7. An eye is installed on the bow for towing the boat. As additional equipment, the Frigate M-5 boat can be equipped with an inflatable bottom, sleighs or a slatted floorboard.

8. Rowing boat Frigate M-5 is equipped with a mount for a mounted transom for installing an outboard motor up to 4 hp. inclusive, which makes it universal for use in various situations.

9. All Frigate inflatable rowing boats are equipped with new improved backpack bags for carrying: reinforced PVC bottom, more wear-resistant Ultra caprovinyl material, a side pocket for oars made the backpack bag even stronger, and Frigate boats are even more convenient to carry and store.

The boat is packed into a convenient backpack and is easily carried by one person.

Specifications Frigate M-5: