• Benefits of fluorocarbon line for winter fishing ⇩
• Why is fluorocarbon line better than regular line? ⇩
• Top 7 best fluorocarbon lines for fishing with prices ⇩
• Sufix ⇩
• Tiagra ⇩
• Ion power ⇩
• Owner ⇩
• Megastrong ⇩
• ADES Daiwa ⇩
• SHIMANO ANTARES FLUOROCARBON ⇩
• Which fluorocarbon line to buy? ⇩
• Fluorocarbon line diameter value ⇩
• Each type of fishing has its own fishing line ⇩
• User reviews of fluorocarbon fishing line for winter fishing ⇩
• Tips from experienced fishermen ⇩

For many men, fishing is their favorite pastime. Firstly, fishing is a great pastime, an opportunity to be on fresh air, nature and catch more to the same fish. Secondly, it causes genuine excitement and a desire to get ahead of, say, a friend in fishing, because men are driven by the spirit of rivalry.

These two components can make fishing successful only if all the necessary gear is prepared for this event. The main tackle is a fishing rod, and its main element is a fishing line.

It is she who has the entire load when the fisherman drags the fish, so there is different types wood. It is worth noting that of all the variety, it is the fluorocarbon thread that is gaining momentum. More about fluorolesque below.

Fluorocarbon is a polymer created by combining fluorine and carbon. This material has high operational characteristics and does not give in to combustion.

It is characterized by increased wear resistance and almost imperceptible "stay" in the water. This is due to the low refractive index of light in fluorocarbon line, which is almost the same as the refractive index of light in water.

The main characteristics of such material:

1. Fluronite is resistant to various temperature changes. Even in cold winters, its use is possible.
2. The polymer does not break down under the influence of water, that is, it does not change its operational properties.
3. Fluorocarbon line is almost invisible in the water. Of course, it does not have 100% transparency, but it is close to the ideal of all woods. Given that any fisherman strives to create conditions for fishing that are close to real, in terms of bait supply, this quality of fluronite is priceless.
4. It has an increased “sensitivity” to fish, and this sensitivity, in turn, is transmitted to the fisherman through the fishing line. This is ensured by the rigidity of the fluorocarbon tackle.
5. Due to the relatively high stiffness index, such a fishing thread is very durable, it is not afraid of stones, snags, if it suddenly catches on them.
6. The fluorocarbon polymer has good mass, which makes it possible for the fishing line to sink to the bottom of the reservoir freely and quickly.

Benefits of fluorocarbon line for ice fishing

As noted above, fluorocarbon thread is relevant not only in summer, but also in winter. It perfectly tolerates low temperatures, even extreme ones, dropping to 30 degrees below zero.

Another indisputable advantage of fluorocarbon line for ice fishing is that it is resistant to abrasion. In winter, the constant contact of gear with ice is inevitable, which can harm the thread, but not the fluorocarbon one.

Why is fluorocarbon line better than regular line?

To determine what is still better tackle made of fluorocarbon in comparison with the usual one, it is necessary to compare their qualitative characteristics.

Here is an analysis of the main indicators:

1. First of all, strength is the most important indicator of any tackle. So the fluorocarbon thread in water is very strong, it has a low breaking load coefficient. Ordinary tackle is inferior in this indicator, it becomes thicker in water, and, therefore, more fragile.
2. The “camouflage” of the fishing line is its no less important indicator. All fishing lines, at first glance, do not differ much from each other, but in aquatic environment everything changes. The fluorocarbon version acquires transparency due to the correct refraction of light.
3. Quantity and quality of bite. An angler using a fluorocarbon rod has a higher bite rate than an angler using a regular line. In addition, the number of exits in the first case is reduced to a minimum.

The use of fluronite in its pure form is not always justified. This is due to some of its shortcomings:

1. Fluronite is strong when immersed in water. Such threads for fishing are adapted for heavy loads, including breaking ones.
2. Fairly high price. This is practically the most expensive option of all types of woods that are available. The high cost is justified by a number of undeniable advantages of fluorocarbon.

Top 7 Best Fluorocarbon Lines for Fishing with Prices

Fluorocarbon tackle differs in breaking load and diameter. These parameters affect the formation of prices, and the manufacturer of fluronite is also of great importance. Here are the top 7 fluorocarbon products:

Sufix

Japan. The fishing line of this manufacturer is similar to nylon threads. A very high quality polymer product that has all the qualities it needs. A coil (100-150 meters) of such a thread costs about 140 rubles, there are also more expensive samples up to 900 rubles.

Tiagra

Japan. Fluorocarbon tackle from this manufacturer is very reliable, high quality. The price varies from 160 rubles and above.

ion power

Japan. Sports variant fluronite. Almost invisible in water, resistant to external aggressive environment. It costs from 250 rubles approximately.

Owner

Production: USA. Very popular view fluorosnasti time-tested. The price is about 300 rubles, depending on the timber capacity and above.

Megastrong

Chinese manufacturer. A good tackle and, if used correctly, it will last a long time. The prices are different, depending on the class to which the fluorocarbon belongs: extra class - the price is about 400 rubles, economy class - lower in cost.

ADES Daiwa

Japan. The price starts from 150 rubles. It has a high rate of transparency, increased wear resistance, there is practically no tensile memory.

SHIMANO ANTARES FLUOROCARBON

With this fluorocarbon tackle, the bite will go with a bang. It has all the qualities that real carbon should have. The price is about 400 rubles and more.

All prices are for fluoro gear, which are not fakes and are made of 100% fluorine and carbon.

Which fluorocarbon line to buy?

Any person often wonders what to buy and what not. This also applies to fluorocarbon tackle. To make the right choice, you need to focus on your fishing needs. In this regard, one or the other option is selected. It is worth paying attention to the extensibility of the tackle and its transparency indicator. The quality of fishing will depend on this.

The value of the diameter of the fluorocarbon fishing line

The diameter of the fishing line excites every fisherman. Most agree that the thinner the "water" thread, the better. It is believed that it is less noticeable in the water. This diameter tackle is good, but not for all rods. It is especially suitable for "sensitive" rods or spinning rods. Larger tackle options are ideal for spinning reels where the line is wound with some effort.

Each type of fishing has its own fishing line

Different types of fishing rods are used to catch different fish. First of all, it concerns the fishing line. Depending on the diameter, one or another type of fluronite is selected:

1. The diameter of 0.10 mm fishing thread is ideal for catching fish such as perch, ruff, roach. These are all fish that do not weigh much, so tackle of this thickness will do just fine.
2. The diameter of 0.12 mm is suitable for bait fishing, not too heavy, as well as jigs.
3. The thickness of 0.14-0.16 mm fluronite provides fishing more big fish, also restrains strong jerks of fish, preventing blurring of the fluronite.
4. The thread thickness of 0.18 mm is ideal for fishing in deep waters, especially in winter.

User Reviews of Fluorocarbon Ice Fishing Line

How to tie a hook to fluorocarbon line?

In order to securely tie the hook to the fluorolace, you can use one universal knot.

The tying scheme is as follows:

• Thread the thread through the eye of the hook and pull it through about 10 cm.
• From the resulting segment, make a loop.
• Wrap the shank of the hook with the remaining part of the thread.
• Thread the end of the fishing line into the previously formed loop.
• Moisten the winding area with water, then, pulling both ends of the thread, tighten a strong knot.

Council number 1. In order for the fishing line to retain its original qualities for a long time, a piece of fishing line of the required length is cut from the reel, wiped with a solution of glycerin. Next, the cut line is wound on a cardboard and stored in a paper bag in a dark, cool place.

Council number 2. So that unnecessary creases and kinks do not form on the fishing line, the reel is rubberized by putting on it any trimmings of rubber pipes.

Council number 3. To remove rust from the hooks, you need to stick them into a bar of soap. After a while, the rust will come off.

Thus, fluorocarbon fishing thread has a number of undeniable advantages. Thanks to them, it is a real find for any angler.

This fishing material ensures successful fishing, if only because such a fishing line is practically invisible in the water. It is easily and quickly immersed in water, and almost does not deform at all during use. Buying a fluoroline justifies itself in a big catch and, as a result, a good mood.

Fluorocarbon fishing line for ice fishing - characteristics, advantages and disadvantages. Link to main post

• Editorial
• about the project

Fishing for bream on the feeder from the shore

The bream is a pretty smart fish. Mature representatives of this species keep mainly at depth. Therefore, catching this fish from the shore is not an easy task. There is no way to do without a feeder rod. This is a universal tool for catching fish at depth. On the feeder you can catch not only bream, but also larger fish: carp, catfish, crucian carp. In this article we will deal with equipment designed for catching bream from the shore. Consider which rod to choose, which reel to equip, as well as which line to use. We will also tell you what kind of bait to buy and use a stand.

Feeder rod

The choice of rod depends on the characteristics of the reservoir where fishing will take place. For a small river, a feeder up to three meters long is enough. If our reservoir is wide enough and are planned long casts, the rod must be chosen from three meters and above. The further the cast, the longer the rod. Separately, it is worth paying attention to the test of the feeder used. The test is the mass of the thrown load for which the rod is designed. As a rule, the stronger the current, the greater the weight of the feeder. For a strong current, the weight of the feeder can reach one hundred grams, with a weak current, about eighty. After choosing a rod, we proceed to the choice of the reel to be used.

• Reel for catching bream on the current ↓
• Fishing line for bream fishing ↓
• Feeder equipment for bream fishing on the current ↓
• Equipment for the feeder "Gardner's loop" ↓
• Equipment for the feeder "asymmetrical loop" ↓
• Bait for bream ↓
• Rod stand ↓
• Let's start manufacturing: ↓

Reel for catching bream in the current

Since fishing for bream with English tackle involves the use of heavy reels, it should be chosen from traction options. For our purposes, we need a coil with a low gear ratio. It should be between 1:5 and 1:6. With a higher gear ratio, the coil will quickly fail. Size 3000 will do. Don't forget to adjust the friction brake so that you won't be left without a rig during sharp jerks of large fish.

Line for catching bream

Braided fishing line

For bream fishing in places where there is a current, the braided line has proven itself well. With the same diameter with a monofilament, the “braid” is much stronger. Also, the “braided” line has zero stretch, which will positively affect the sensitivity of our tackle and will allow you to determine the beginning of the bite of even the most “sluggish” fish. The diameter of the fishing line should be taken 0.12 millimeters. This is the optimum thickness.

Feeder equipment for bream fishing on the current

After we have chosen a rod, reel and fishing line, we need to tie the fishing equipment. Since the place of fishing is assumed to have a current, in these cases two types of equipment have proven themselves best, the "Gardner loop" and the "asymmetric loop". Let's take a closer look at how to make them.

Equipment for the feeder "Gardner's loop"

There are two options for making this type of tackle. The first - on the main fishing line, the second - on a separate piece and subsequent installation to the base. There is no consensus on which is better. As a rule, novice anglers knit on a separate piece to practice knitting techniques. More experienced knit immediately on the basis. So, let's start knitting gear:

1. At the end of the main fishing line we make a small loop (for a leash).
2. We retreat the distance from the finished loop to the length of the palm.
3. At the measured place, we knit a large loop in such a way that a feeder passes through it.
4. We put the feeder on the swivel and fasten it to a large loop.
5. We attach a leash with a hook to a small loop. The length of the leash is from thirty centimeters.

Equipment for feeder "asymmetrical loop"

According to experienced anglers, this is the most sensitive equipment, transmitting even the weakest and most cautious bite. For its manufacture you need:

1. Cut off a piece of fishing line one meter long.
2. We fold our piece in half.
3. We tighten one end so that in the end it is ten centimeters longer than the other.
4. We tie the ends. A longer one will serve for attachment with the main fishing line. We make a loop on it and put a swivel.
5. In the loop we put the feeder on the swivel. The feeder should slide freely along the loop.
6. We pull the loop over the feeder on one side and over the knot on the other.
7. On one side of the loop, we retreat from the feeder a distance equal to one third of the length of the loop and knit a twist for the leading leash.
8. The twist should be ten centimeters long, at the end of the knitting we fix it with a double knot, leaving a loop for attaching the leash.

The result is a loop, with halves of different lengths. A sliding feeder is fixed on the long half. Now that the gear is ready, it's time to talk about bait.

Autumn bream fishing on the feeder. Equipment, bait, bait.

How to catch bream from the shore or boat? Let's find out in this article.

We make the best bait for bream from a variety of products.

How to increase the catch of fish?

For 7 years of active passion for fishing, I have found dozens of ways to improve the bite. Here are the most effective ones:

1. Cool activator. This addition of their dry blood attracts fish most strongly in cold and warm water. Discussion of the bite activator "Hungry Fish".
2. Increasing gear sensitivity. Read the appropriate manuals for the particular type of tackle.
3. Pheromone baits.

Bait for bream

Of the purchased bait mixtures, the most common are:

FISH DREAM "Bream". This classic groundbait has a spicy, sweet smell, is moderately viscous, and has a brown color. Contains crushed flaxseed. The grind is even. FISH DREAM also produces other groundbaits, Bream Peas, protein-rich groundbait Bream + Betaine and Cold Water Bream.

Flagman PROFESSIONAL "Bream". This bait picks up large fish well. The grinding is medium with a content of large particles. The smell of the mixture is gentle.

Sensas 3000 Super Black "Bream". This manufacturer produces several types of bait mixture for bream, adapted to different fishing conditions.

Rod stand

For feeder fishing for bream, you need a rod stand. Some simply use a slingshot, sticking it into the ground and laying a feeder on it, resting the other end on the soil. You can also buy a stand in the store. We will now tell you how to make a stand for a feeder from a plastic hanger yourself. For this we need:

• A suitable plastic clothes hanger, in which the hook is removed and the diameter of the hole for it is just over six millimeters.
• Rubber tube, suitable diameter for the thickness of the hanger.
• A building stud 6 mm threaded, or for example a tube from an old cornice, with the same diameter.
• 6 mm wing nut and nut.
• Sharp knife or hacksaw.

Let's start making:

So, we tried to tell you how to catch bream on a feeder. We hope our tips were helpful to you. Good luck and happy fishing.

How to choose a braided cord or criteria right choice wickerwork

The problem of selecting a braided line has always been considered one of the main ones when arranging gear in any direction. fishing. Any angler always tries to choose a braided line thoroughly and not in vain. The result of fishing, as well as the ability of a spinner in one way or another, often depends on a properly selected braided fishing line.

The strength of the tackle, its sensitivity and information content depend on a well-chosen braided cord. Not all lines allow you to fish in difficult conditions. Also, not every braid can be used with any bait and spinning fishing methods. Therefore, today any angler can safely say that a braided line has an important impact on the characteristics of the tackle and its capabilities in the fishing process.

The main indicators of braids

When choosing braid, experienced anglers pay attention to many indicators that the manufacturer indicates on the reel. Sometimes these few inscriptions carry a lot of information, which is decisive in the final choice. Also in our time about braided cords, a lot of information and reviews can be obtained on the Internet and this opportunity should not be neglected.

In general, the main indicators of braided lines, which determine their purpose and operating parameters, are the following:

• type of cord weaving and fibers used;
• the diameter of the braid and its roundness;
• smoothness of the surface of the cord;
• abrasion resistance and wear resistance.

Let's consider each characteristic in more detail.

Weaving type

All braided lines are divided into two large groups, which are characterized by the way the fibers are woven.

• Cords obtained by classical plexus. In this case, all the fibers of the braid are intertwined. Each manufacturer has its own weaving technology, which determines how the product will turn out. The method of weaving, its quality and density determine the roundness of the cross section of the cord, its strength characteristics and other important characteristics.
• Soldered or sintered cords, in which the fibers used are not intertwined, but are placed parallel to each other and then soldered in a certain way. Each manufacturer producing sintered cords uses different heating technologies and different binding materials that determine the stretch, roundness, strength and other parameters of the braid.

In general, there is no particular difference when choosing a multifilament fishing line of one group or another. First of all, the parameters that determine its direction and ability to work in given fishing conditions are important in the line.

Diameter

Each manufacturer must indicate the diameter on the braided reel. But, if for a nylon fishing line the diameter is a fundamental indicator and it is easy to calculate, or rather, measure in the simplest ways, then the diameter of the cord is not such an unambiguous characteristic.

• Firstly, every cord manufacturer, even the elite ones, sins with exaggeration. That is, it indicates a diameter smaller than it actually is.
• Secondly, a perfectly round section is predominantly found in braids from the elite segment, and inexpensive laces usually have an oval section or are completely flat.

It is obvious that it is actually impossible to measure such a diameter, but it is realistic only to calculate some average value. Therefore, when choosing a braid, it is always worth visually evaluating its roundness and diameter, as well as touching and twisting it with your fingers - a flat braid is immediately felt tactile.

Another thing is the load that a braided fishing line can withstand. Typically, the manufacturer indicates it in pounds (lb) and less often in kilograms. Well-known manufacturers value their reputation and try to indicate the most honest values. It is also very important how the braid holds the load on the knots.

Any knot for all cords in a row will not work, so it is better to pay attention to the manufacturer's recommendations. The durability of the braid is also important, as there are times when, after a season of intensive fishing, the line simply begins to “crumble”. Previously, this was especially often observed with eight-core braids, even very expensive ones.

Surface smoothness

The range of the cord depends on how smooth the surface is. For fishing from a boat, this parameter is not as important as when fishing from the shore. Smooth braid allows you to cast baits at very decent distances, which is required for coastal jigging. The same qualities will be required by asp fishing, in which the maximum casting distance is a decisive factor in successful fishing.

Abrasion resistance and wear resistance

This indicator is important when fishing is carried out in difficult or extreme places. An abrasion-resistant line is required by "jigits", who often fish in strong snags, where the line is constantly in contact with the branches of flooded trees. Also, such braids are used when fishing on the bottom, overgrown with shell rock, or rocky and pebbly areas.

Which cord to choose

So, the selection of braid should be carried out for a specific fishing method and conditions, paying attention to the parameters discussed above. The price of the cord, of course, determines its quality. If for some reason the spinning player cannot allocate a decent amount for the purchase of an expensive braid, then you can pay attention to Sufix, Salmo fishing lines, the Sunline budget segment, the famous Power Pro also costs a little. Of the elite lines, it is impossible not to mention Varivas, YGK, Seaguar, the expensive Sunline segment.

Edward Ball – Specially for the site SamodelkiFish – fishing, Ukraine, Kyiv

• Tee on a spinner - sharpen or change?
• Carp and feeder fishing

The diameter of the braid indicated by the manufacturer on the spool is a very approximate value that may not correspond to the real one at all. After all, the same fishing line, even from premium brands, has an uneven thickness. The diameter of the braided cord is not a constant value along the entire length of the fishing line, but the value indicated on the spool is the average value of the diameter of the fishing line.

The problem also lies in the fact that it is almost impossible to accurately measure the diameter of the braid, and each of the cord manufacturers uses its own method of calculating it, based on the ratio of the mass of the material and other parameters of the multifilament fishing line.

Braid diameter

What does the question “what braid diameter to choose” mean if it is not specified for what?

It means absolutely nothing without specifying the parameters of the tackle and the method of fishing. Moreover, if we talk about spinning braid, for example, then here the diameter of the braid can also fluctuate over a wide range. Ultralight for spinning is thin delicate cords, for jig spinning it is much stronger, depending on the weight range of the lures used. What braid diameter to choose in each case? Let's look into this in more detail, but first, a few facts about the braid.

Braid Facts

Braid under the microscope

What you need to know about braided line:

• the braid has almost no stretch (zero stretch), which is very good for controlling the bait and registering a bite, and not very good for playing the fish;
• braided cord is much stronger than any monofilament line (monofilament);
• depending on the type of weaving, a multifilament thread is round and flat in cross section (a round braid sails less and sinks faster);
• braided fishing line, especially without impregnation, absorbs water, so it cannot be used in winter (with the exception of special cords and impregnated from freezing);
• braided line very quickly cuts through low-quality rod winding rings;
• not all knots for ordinary fishing line are suitable for braided line (it has great slip);
• Braided line is more expensive than regular line, but it's worth it.

spinning braid diameter

What braid diameter to choose for spinning? You can endlessly rant on this topic, saying that everything is not so simple here and other “blah blah blah”, but we will try to be more specific.

The diameter of the spinning braid depends on the following parameters:

• test your spinning and reel class;
• the weight of the baits used.
• the size of the intended fish you are going to catch;

When it comes to choosing braided fishing line for spinning, it should be borne in mind that it is two or more times stronger than usual. Therefore, if you used monofilament with a diameter of 0.3 mm, you should choose a braid with a thickness of no more than 0.15 mm. You will be surprised how far your bait flies.

Braid for pike spinning

“What kind of braid for pike,” is exactly what they often ask in stores.

Braid for pike? Are you seriously? Well, let's once again draw an analogy with an ordinary fishing line. If earlier you caught pike up to 3-5 kg ​​and monofilament with a diameter of 0.3 mm was enough for you, then a braid with a thickness of 0.08 - 0.1 mm can hold such a weight. Braid with a diameter of only 0.1 mm will definitely go for pike up to 5 kilograms.

A thicker braid will be able to withstand more, but the casting distance decreases with thickness and is very difficult to break when hooked. You should not get carried away with excessive thinning either, since the thinner the braid, the faster it wears out and serves less. Here you need to find a compromise.

For pike fishing up to 5 kg, a braided line with a diameter in a wide range is suitable - from 0.06 mm and thicker. For light baits and ultralight spinning we use up to 0.08 mm, for a medium weight jig a braid up to 0.14 mm is suitable, for heavy jig spinning you should choose from 0.14 to 0.18 mm. So we figured out what kind of braid for pike is needed.

Conclusion: the diameter of a suitable braid for spinning is more tied not to the type and size of the fish, but to the power of the rod and the weight of the baits used. It doesn't matter what you will be catching - perch, pike, zander or other fish, it is important that the braided line matches the power of the tackle as a whole (spinning + reel + bait).

Braided fishing lines from different manufacturers can vary significantly in breaking load for the same diameter, so this must also be taken into account.

Braided fishing lines for spinning - video

If you know very little or nothing about braided fishing lines and want to learn more, we recommend watching the film by the Shcherbakov brothers dedicated to the choice of braided fishing line for spinning and about braiding in general:

Feeder braid diameter

All that we have said about braided line for spinning is generally true in the choice of braided fishing line for feeder gear. Only instead of the power of spinning rods, the power of the feeder gear and the weight of the feeders used should be taken into account. Many parameters of a braided fishing line that are important in spinning are not taken into account for a feeder.

The main thing is that the fishing line can withstand the critical load that occurs when casting the feeder.

To cast a feeder weighing 100 grams over 50-60 meters, the peak load for the cord is no more than 5 kg, and for a 150 gram load - no more than 7 kg. These are approximate figures that can be used as a guideline when choosing a cord according to the test breaking load.

1. For fishing without a current with feeders up to 30 grams, a line with a diameter of 0.05 mm with a shock leader is suitable.
2. For fishing in the current with feeders up to 150 grams - braid with a diameter of 0.17 mm.

How to measure braid diameter

It is very difficult to measure the diameter of the braid

Measuring the diameter of a braided fishing line is not as simple a task as it might seem at first glance, but almost solvable.

Why can't you accurately measure the diameter of braided line? The thing is that, unlike monofilament, a braided cord consists of many ultra-thin threads connected by a special weave with or without impregnation. Even with a slight compression of the cord with a measuring tool (micrometer), we get incorrect measurements at the output. In addition, the braided line may initially have not a round but a flat section.

It would seem: if we know the number of threads in the braid, what could be easier than taking and “adding up” the diameters of all the threads and getting the total diameter of the braided cord? Theoretically, knowing the cross-sectional area of ​​each thread in the cord, it is possible to determine the total diameter of the cord, but the problem is that the diameter of each thread differs significantly from each other and is different along the entire length. And moreover: who said that the number of micro-threads is generally known and that it is a constant value? So this measurement method is also very inaccurate.

So how, nevertheless, to measure the diameter of a braided fishing line?

We can use a little trick: if you tie a regular single knot and tighten, its density will allow us to use a micrometer and find out the size of the knot. If you tie several knots on one fishing line, their size will differ from each other within the margin of error. Thus, we can take the thickness of the knot as the conditional size of the thickness of the braided fishing line.

If we divide the thickness of the knot by two, we get the diameter of the braided thread close to the real one.

It should be understood that this method does not give us an absolutely correct result, but allows us to compare the thickness of different braided lines with sufficient accuracy. Having a "standard" braided thread on hand, let's say 0.15 mm in diameter, and knowing the exact size simple knot on it, we get the opportunity to compare.

The Shcherbakov brothers even filmed a video about this.

I am already familiar with Bobbing products. (I have several braids of different diameters) And I even did a review on Therefore, when I saw a discount on this braid at a sale, 300 meters long for a little over 9 dollars, I bought it without hesitation.
It was still summer. The wicker parcel came pretty quickly, but it just hung in my fishing box idle.
But with the advent of winter, I found a use for it. And I liked this application. But first things first.
The braid came in a rather shabby box. Don't know. Either the store has already sent this one, or it has suffered on the way:


Braided spool inside:




More precisely, three coils connected together, with a wound braid of 100 meters each:

A feature of this braid is its color. Changing every meter. As a result, at 300 meters we have a beautiful rainbow:


This coloring is made for a reason. It is needed to control the length of the braid. Convenient for trolling fishing and casting spinning.
The weave itself is quite thin. I have nothing to measure its thickness, so I can’t say for sure whether there is 0.12mm or not:




I liked the quality. The braid is not shaggy, visually it has the same thickness along the entire length.
Really very tear resistant. I couldn't tear it apart with just my hands. She begins to cut her fingers, but does not want to tear. This gives hope that there will be no problems with not very large specimens of perch and pike (which prevail in our area). They won't gnaw or bite.
This time I decided to use the braid in the vents. Many fishermen are very fond of the first winter ice. And I am no exception. At this time, you can catch quite a lot of pike, which is still actively feeding.
Therefore, for testing, I bought two offline girders:


And he equipped them with a monitored wickerwork:


Since the braid is very strong, you have to cut it with this tool:


I did not wind all 300 meters. Limited to only 1 coil out of three. This is approximately 50 meters for each vent:




Although in fact I did not wind exactly, and most likely it turned out to be about 30 and 70 meters on two coils.



I went fishing last weekend. And as you know, most often fishermen bite either yesterday or tomorrow. But today it does not bite. So my trip was also not very successful for the catch. I caught a few eyelets on the balancer:


And a very small pike, about 600 grams, which pecked precisely at the zherlitsa with monofilament:

(at the same time, I had 8 zherlits installed) But in defense of my fishing sentiment is the fact that it was a single pike among a dozen fishermen who were fishing nearby.
Based on one fishing trip, I can already draw one conclusion in favor of braided line: it is much better seen on white ice, unlike fishing line. This simplifies its search and the process of winding. Definitely now I will put braid on the vents. Luckily I have it in stock.
But the remaining 200 meters of this particular braid will probably be used not on the vent, but on the recently arrived new PisciFun Torrent multiplier reel.
That's all. I finish the review. There won't be any conclusions. The braid is good, the price is comparable to offline offers, but at least I have already come across the Bobbing company, and it suits me. I probably won't recommend. Not because it's bad, but because there are a lot of fishermen here (judging by the comments to previous reviews) and everyone has their own preferences. I just talked about mine. Therefore, not a tail for everyone. And good catches.

I plan to buy +7 Add to favorites Liked the review +32 +41

When choosing a braided line for spinning, anglers most often pay attention to indicators such as strength and thickness. However, do not blindly trust the parameters indicated by the manufacturer.

• Index strength many experienced anglers test at home. It is enough to arm yourself with a set of cargoes to compare the declared figures with the real ones. Novice anglers should be aware that manufacturers usually exaggerate the capabilities of their braid by 25-30%. Therefore, when buying a cord with a tensile strength of 12 kg, you can be sure that it will withstand a load of 8 kg.
• Braid diameter can be called an abstract indicator that is measured by the shell. Often, beginner spinningists compare braids by analogy with monofilament fishing lines. However, this approach is fundamentally wrong. Because of this, a number of manufacturers do not indicate the thickness of the cord at all, and strength plays the role of the main characteristic. It can be expressed in kilograms or pounds (libra) that are familiar to us. 1 Lb corresponds to 453.6 g.

A few words should be said about the structure of braided lines. All cord manufacturers use polyethylene fibers from three factories under the brands:

• Dyneema is produced in Holland and Japan;
• Spectra is made in the USA.

Thus, the fibers at the base of braided cords are almost the same, but they are intertwined along different technologies, with different coatings, which is why the products differ in price and quality.

When buying a cord, you should pay attention to several nuances.

• It is better to take a fishing line in a trusted store where a fake is not sold.
• You should immediately visually inspect the reel with fishing line. The presence of scuffs and irregularities in the weave is a sign of a low-grade cord.
• Preference should be given to round braids.
• You can feel how slippery the thread is to the touch.

Good luck fishing!