Triple braided knot. Book: The Most Reliable Fishing Knots

SHOW

HOLD

Experienced fishermen have in their arsenal many various ways tying fishing line into a node. What about for beginner anglers? Especially for them, a small rating of the most durable and reliable knots was compiled.

Any tackle must be connected to a hook or lure. The strength of the knot depends on the chosen option and the quality of the execution of a particular knot. In addition, a novice fisherman should know a few tricks with which he can easily tie strong and reliable fishing knots. For example, before tying, it is imperative to moisten the fishing line with water. Thus, friction will decrease and strength will increase. When choosing one or another version of the knot, you need to take into account the diameter of the fishing line and its individual ends. Do not expose the fishing line to the negative effects of open flames - lighters or matches. The structural fibers of the fishing line during heating change their strength characteristics for the worse.

What should be the fishing knot?

The algorithm for the ideal fishing knot was found a long time ago. Thousands of years of experience of our ancestors, modern technologies and materials made it possible to compose and test fishing knots in practice. The fishing knot must be strong and reliable. In addition, it should be easy and quick to tie.

Best Fishing Knots

For fixing the bait, Palamar is rightfully considered the best fishing knot, and for connecting 2 ends of the fishing line, Loop to Loop is most suitable.

During the tying of the fishing knot, the fishing line is deformed. The most common injuries are twisting, compression, bending and stretching. Deformations negatively affect the strength characteristics of the fishing line. Therefore, the best fishing knots were recognized as light and unpretentious - "Palamar" and "Loop to loop". The operational properties of the node depend not only on the selected node, but also on the line used. Thin and thick lines behave differently in knots. The most popular fishing lines among domestic anglers are medium hard lines with a diameter of t 0.35 to 0.12 mm. It must be elastic, strong, have high-quality calibration.

Knot "Palomar": how to tie, advantages and disadvantages

In order to tie this knot, it is necessary to bend the end of the fishing line in half, forming a flat open loop. Then pass the bent end through the eyelet. Form a simple knot with the same bent end. Then you need to skip the bend over the hook and girth of the knot. Be sure to moisten the formed knot with water and tighten its ends tightly. Trim the ends neatly.

Palamar is a strong and reliable knot. Over time, you can learn how to successfully tie it even in the dark. The only downside to the Palomar is that the hook needs to go through the loop, which is not always easy to do.

Fishing knot "Grinner"

This unit is characterized by excellent load capacity. It is used not only for hooks, but also for "carp" sinkers. Experienced fishermen recommend using this knot for various kinds fishing lines: monofilament, braided, fluorocarbon. "Grinner" is quite difficult to tie, the risk of deformation with such a knot is high.

In order to tie a knot, you need to pass the fishing line into the hook ring and leave a special working end, the size of which should be at least 15 cm. Then you need to fold the working end and pinch the top of the loop. Wrap the loop with the working end several times. Then tighten, moisten and tighten the formed knot.

Improved and hardened "Clinch"

These knots are the most commonly used, as they are the best ways to attach fishing line and hook. It is recommended to tie the clinch with a fishing line with a diameter of no more than 1 mm.

Often this knot is used to attach the leader to the front sight. Since the knot is difficult to tie on fishing lines of a larger diameter, it is not recommended to use a fishing line of more than 1 mm.
In order to tie a clinch, the fisherman needs to pass the end of the fishing line through the eyelet and twist the loops in the form of a spiral several times. Then it is necessary to draw the rest of the fishing line to the first turn and pass it through the formed loop. Skip the end through the last turn. The knot is neatly trimmed and trimmed.

Experienced anglers often use this knot. The clinch is ideal for connecting a small diameter leader to a large hook. The improved and hardened clinches are great for catching big fish.

"Triple Fishing Knot"

It is not easy to tie this knot, but over time everyone will get the hang of it and will be able to knit such a knot easily and quickly. First you need to fold and clamp the ends of the fishing line. Then step back from the edge of 20 cm and clamp the fishing line. Make a simple knot, skip the ends 2 times and form a knot.

If everything was done correctly, you should get a node with a 3rd pass. Be sure to moisten the fishing line before tightening. The lines must be tightened at the same time. After the works of these actions, the figure "8" will be obtained. Once again, you need to pull on different ends of the fishing line.

The resulting node must not have voids. Cut off the rest of the line.

"Blood Ties"

durable and reliable node, used to connect fishing lines, the diameter of which differs by no more than 1/3. "Blood ties" retain the carrying capacity of the fishing line by 85-90%.

In order to tie this knot, it is necessary to fold two fishing lines, leaving each working end 20 cm in size. Then wrap the working end of one fishing line with another more than 5 times. Return the working end to the beginning and pass it between the fishing lines, and then pinch. With the working end of the other fishing line, repeat all the previous steps. Pull one and the second nodes. Carefully trim the rest of the line.

"Double Slip Knot"

The knot is designed to connect lines of the same diameter.

Fold 2 lines. Form a loop from one ring of fishing line. Then you should wrap the end of the fishing line inside the loop. Make a few turns and tighten the knot. On one side you get a slip knot. Use the second end of the fishing line to form a complete loop, which then needs to be wrapped. Moisten the knot and tighten. Cut off the remaining tails.

The knot is self-tightening, that is, it cannot be untied arbitrarily.

Knot "Loop in a loop"

This knot is rightfully considered the most durable. Its advantage is quick and easy dismantling. In order to tie this knot, you need to take a fishing line, step back 30 cm from the edge and fold it in half. Next, you need to form a simple node. Pass the fishing line into the knot 2 times. Moisten the knot with saliva and pull off. With the correct formation of the knot, the fisherman will receive an eight. Next, make a surgical appearance of the loop, throw it over another loop and then skip it. Pull the line and leash in different sides. Trim the ends.

There are many different fishing knots with their own advantages and disadvantages. The most durable and reliable of them were discussed above. We sincerely hope that these knots will be useful for both beginners and more experienced fishermen.

Fishing lines retain about 90% of their carrying capacity in the knot. You can tie monofilament fishing lines with a difference in diameter of no more than 0.05 mm.

Fold the two lines to be tied together, aligning the ends. Clamp the fishing lines with your fingers at a distance of 15-20 cm from the ends.

Make a simple knot with two strings. Make sure that the ends of the lines remain at the same level.

Pass the ends of the lines twice into the simple knot obtained earlier.

Moisten the place where the knot is tightened with saliva and gently pull the ends of the folded lines from both sides at once. Make sure that both fishing lines are tightened at the same time, without sliding over each other (usually the thinner one is tightened faster). If you did everything right, before the final formation of the knot, the tightened fishing lines will fold into a figure-eight figure.

Gently pull on the different strings now to complete the knot. There should be no visible voids in the resulting node. Trim the excess, leaving 1-1.5 mm at the ends.

Currently, there are many different ways to connect various fishing lines, cords and monofilaments. also used for attaching leashes and hooks. The stronger the connection, the less chance of losing both tackle and catch. In reality, there are a lot of nodes, but there is no need to know them all. It will be enough to learn the technique of knitting 5-6 options. One of the main ways to attach a fishing line or braid to a hook is Palomar. This knot has a number of advantages, which make it one of the most famous and reliable methods of fastening.

What is the difference between fishing line and braided line?

Often the same type of fastening is attributed either to a fishing line or to a braided line, and there will definitely be someone who will insert his weighty word regarding monofilament. Does it really matter which knot to use on which tackle? As practice shows, there are no significant differences. For example, Palomar perfectly connects both fishing line and monofilament. The knot does not slip and connects remarkably almost all types of gear, the main thing is that their diameter is not large.

But still, cords and braids from different manufacturers differ from each other in the type of fibers, weaving and the composition of the outer coating. That is why many serious gear manufacturers recommend one or another knot for their products. Most often, brochures and operating instructions indicate the Uni and Palomar nodes.

Ultra-reliable fastening unit

Among the great variety of fishing knots and their modifications, there are several that are considered the most reliable and strong. Some of them connect fishing lines and braids, while others are used in equipment and attach hooks and leashes. This is exactly what the Palomar node is. In addition, numerous variations testify to its popularity.

Among experienced fishermen, there is an opinion that this type of fastening is good only for braids. But this reasoning is fundamentally wrong. Palomar is a universal knot. In addition, it was noticed that, due to the roughness of the braid, it is not tightened tightly enough. As a result, it can weaken or even untie at the most inopportune moment. Therefore, if necessary, to tie an artificial bait, such as a wobbler, to the main braid on a spinning rod, it is better to use another knot. And when knitting, you can moisten the braid well and tighten the knot tighter.

In practice, it has been verified that Palomar knits easily, in comparison with other knots, while maintaining the strength of the fishing line. Even manufacturers of fishing tackle recommend it to connect the parts of the equipment. This knot is difficult to do wrong.

Application

Palomar is a well-known and popular knot. In addition, it is simple, and its knitting is easy to remember. It is intended for connecting fishing line with flies, spinners or hooks. Also through the swivel they can attach leashes. In general, the node is simple and verified. It has long been mastered by amateurs as spinning fishing, and bottom fishing rods. "Palomar" is used in any gear for various types of equipment. For example, in spinning, with its help, spinners and wobblers, as well as soft baits, are attached to the braid, in float, match and bottom fishing rods, this knot also leads, and it can also be used to connect a sinker to the fishing line by the eye.

Tying the Palomar Knot

As mentioned above, the Palomar fishing knot is relatively easy to knit. You don’t have to practice for a long time to remember all the actions. To connect the snap-in parts with this node, you must perform the following steps:

1. Fold the fishing line in half so that you end up with a loop.

2. We stretch this loop into the eye of the hook or bait. If it is small, then you can proceed as follows: first we stretch one end of the fishing line into it, then, having formed a loop, we again stretch it through the hole in the ear, but only in the opposite direction.

3. The folded loop is tied around the hook so that it is inside it.

4. We pull out the loop just enough so that a hook or artificial bait can be inserted through it.

5. Wet the resulting knot and tighten it tightly. You need to pull on both ends of the line. The remaining free end is cut off so that at least 3 mm remains.

Alternative knot tying

The Palomar knot is often used for dropshots. Sometimes it becomes necessary to choose an alternative knitting method for this equipment. In general, all points are performed as in the classic version, with the exception that the last loop is knitted opposite the shank of the hook. In this case, the hook is fixed - it is no longer free in its movement. Such a small trick gives a better fixation.

For the same reason, feeder lovers knit this knot according to the classic pattern described above. They need a movable "working" hook. In general, everything is tested in practice. It is recommended to study and remember both knitting options. Then it will be possible to understand in practice which option in which case is preferable and more reliable.

Benefits of the Palomar node

So, the Palomar node is described in detail, but what are its advantages over dozens of other fastening methods? Firstly, this is a universal type of connection, suitable not only for fishing line, but also for cord, braid and monofilament. This node is one of the three most reliable. With him, even on a thin line, you can fish enough big fish. This method of connecting lures and hooks to the main line minimally reduces the strength of the equipment, by about 5%, which is undoubtedly an excellent indicator. It is also captivating that it is knitted very simply, a professional will perform this knot even in the dark.

In the process of tying, you can make the hook (or bait) fixed or loose. And this is a definite plus, because the equipment is different.

Flaws

The Palomar knot, used for monofilament and braided line, also has disadvantages. When knitting it, the loop will need to pass through the hook or bait, so it must be large in size. In this case, it turns out that the consumption of fishing line increases. But if this tackle is inexpensive, then you can’t say the same about braided line or cord. The consumption will be noticeable after 20 dressings. This loss is palpable.

In order to save at least a little, you need to knit a knot a little differently than in the classic version. So, after the loop is threaded into the eye and a simple knot is made, it is not tightened much. Next, the loop is pulled so that the free end remains only 2 mm. Further, this loop, as expected, is thrown onto the hook and pulled into a knot. At the same time, the free end remains short, it is not necessary to cut it. Although this is not much, it still saves the expense of expensive gear.

Triple fishing knot "Palomar"

Triple knot "Palomar" is a variation of the classic. It also knits easily and quickly. But keep in mind that this option is absolutely not suitable for attaching hooks. This is because the line has to pass through the ring not once, but six times. At the same time, the fact that the turns become dense is very upsetting: they press on each other, weakening the strength of the connection. For the same banal reason, this knot is not applied to a monofilament.

But it is the triple "Palomar" - the best option for braid. He keeps her strong. It knits easily. As in the classic version, fold the braid in half, forming a loop. We pass it through the ring of the bait, such as spinners or wobblers. Now the main point: we stretch the loop through the ring two more times. Now, with the end of the braid folded in half, we tie a regular knot above the spinner. Without tightening it, we pass the loop through the spinner, draw it to the turns on the ring and tighten it. To make the knot strong, moisten it with water and pull it onto the main part of the braid again. Cut off the excess free end, leaving 3 mm. This is how the Palomar triple knot is obtained.

Modification

In order to save the braid, a simpler fastening was invented and tested than a double knot. "Palomar" has several modifications. This option differs in that the loop is passed not through the bait or hook, but through the free end of the fishing line. Of course, classic knitting is somewhat stronger, but this modification is more economical. In this way, it is not recommended to connect intermediate baits, such as dropshot or wabik. But for other cases, it will fit perfectly. This modification is very simple, the knot is quite strong. The loop does not need to be made large, respectively, braids or fishing lines take less. It's best to try both knots and compare which one is better.

In any gear, it is required to connect the fishing line with a hook, lure, swivel and other types of lines. The strength of the fishing line depends on the correctly selected and executed knot. In addition to choosing the optimal connection method, there are several other points that the angler should pay close attention to. They will allow you to maximize the parameters of the fishing line after tightening the knot.

Most anglers know that wetting the line is essential when tying a knot. Then the friction of the fishing line will be reduced, and the strength of the fishing line and the knot will be maximum.
When choosing a method for tying two types of fishing lines, it is important to pay attention to the diameter. If two pieces of fishing line have a comparable diameter, then one knot will do, and when tying ends of different thicknesses, you will need another option.
In no case should you remove excess pieces of fishing line in the flame of a lighter or match. Strong heating will lead to a change in the structure of the fibers, which will negatively affect the reliability indicator.

Triple knot ("Tree-water knot")

A triple knot is best used to connect monofilament lines of the same diameter. With a difference in thickness of no more than 0.05 mm, the strength of the fishing line is maintained by 90%. To get a good connection, you need to consistently perform the following steps.

Two connected fishing lines are folded, and the ends are aligned.

With the fingers of one hand, the fishing lines are clamped about 15-20 cm from the end.
Now you need to make a regular knot from the lines, while the ends of the lines should remain at the same level.
The ends of the lines are passed twice into the usual knot made earlier.
Having moistened the fishing lines with saliva or water, you need to gently pull the ends of the fishing lines on both sides. At this stage, the angler must watch for the simultaneous tightening of both lines.
For the final formation of the connection, gently pull the different fishing lines in opposite directions. Excess lines remain cut, leaving 1.5 mm at the ends.

Note: if everything is done correctly, then before tightening the knot resembles a figure eight. After the final tying, no visible voids should form in the knot.

Connecting the lines "loop to loop"

Much stronger than any knot is the connection of the main fishing line with the leash in the “loop to loop” way. This option is even more preferable than using a swivel. This is especially true if the eye of the swivel is made of thinner wire than each line. The advantage of this connection will be the quick replacement of the finished leash. The connection is quite simple.

First you need to make a loop on the main fishing line. To do this, the end of the fishing line 60-70 cm long is doubled.
A simple knot is formed from a double fishing line.
The loop must be passed 2 more times into the knot. As a result, the preparation of the “surgical loop” knot will be obtained.
Having moistened the fishing line, you can tighten the knot. Excess line is cut off.
A similar knot must be made on a leash.
Now the loop of the leash is thrown over the loop of the main line, and the other end of the leash (for example, with a hook) is pulled into the loop of the main line.
It remains to pull the main line and the leash in different directions to get a reliable connection.

Advice: so that when tightening the “loop into the loop”, the loop does not overlap over the end of the fishing line sticking out of the knot, you need to leave segments no longer than 1-1.5 mm.

Blood or blood knot ("Blood knot")

If one of the lines is no more than 3 times thicker than the other, then you can use the “bloody knot”. It retains the strength of the fishing line up to 90%.

Both fishing lines need to be folded in parallel (ends in different directions) and pinch the middle part with your fingers. The ends should be 15-20 cm long.
First, one end of the fishing line is wrapped around the other fishing line 5-7 times.
The same end returns to the beginning of the winding and is passed between the fishing lines. This place should be pinched with your fingers.
The end of the other fishing line makes a similar winding on the other side. The working end comes back and stretches between the fishing lines next to the first end, only in the opposite direction.
First, one side must be moistened with saliva and the knot tightened, and then the same is done on the other side.
Holding hands on both fishing lines, you should pull them in opposite directions so that the knots fit snugly against each other. The excess line is cut off.

Note: if all operations are performed correctly, then after tightening the knots, the ends of the lines will look in opposite directions.

Double sliding knot ("Double Grinner knot")

The reliability of the double sliding knot exceeds the "bloody" counterpart. The difference in the diameters of the lines can reach five times the size. In this way, you can connect both monofilament fishing lines and braided cords. The knot is also suitable for attaching a fluorocarbon leader to the main line.

First, the fishing lines overlap, the ends should look in different directions.
Fingers adhere to folded fishing lines approximately in the middle. One end of the line returns to the fingers holding the double line. In the resulting loop, you need to skip the working end 5-7 times, wrapping both fishing lines.
Now you need to moisten the fishing line and tighten the knot by pulling on the working end.
The same operation is done on the other side.
When both knots are formed, you need to pull the fishing lines in different directions. The nodes will converge and the connection will be ready.
It remains to remove the excess ends of the woods.

Anglers borrowed this knot from fly fishing. It is highly durable and reliable. Due to its compactness, the knot is able to freely pass through the fishing rod throughput rings. The connection is a combination of the "Clinch" knot (cord) and simple knot(monoline).

The first step is to make a regular edge knot from a monofilament.
A braided cord is passed through it, after which a monofilament knot is tightened to the end. Do not forget to wet the fishing line before tightening the knot. The working end of the braid is left 15-20 cm long.
Now the cord is made 6-8 turns around the monofilament line, and the working end of the braid is passed between the two lines near the end knot.
The end of the braided cord is passed through the loop that it formed.
The fishing line is moistened, and the knot is tightened by pulling on the braid.
It remains to pull the knots to each other by pulling the fishing line and cord in opposite directions. The excess is cut off, leaving 1-1.5 mm.

Advice: when forming a knot from a braid, it is necessary to ensure that the turns are evenly located relative to each other.

The above examples of knots for connecting fishing lines allow you to choose the right option for any occasion. Each angler will adopt the connection he likes. Then, while fishing, an unpleasant breakage of tackle will not confuse a fishing lover.

Safe Communication [Magic Practices to Protect Against Energy Attacks] Penzak Christopher

triple knot

Also used for magical protection. different types triple knots and three-pointed symbols (Fig. 12-14). These symbols are believed to lead dangerous energies astray and bind them; it is believed that it is difficult for energies to move through structures such as a knot or a spiral. As a rule, such symbols have Celtic roots. Wiccans perceive them as symbols of the Triple Goddess. And witches who do not like the pentacle use triple symbols for protection.

Rice. 12. Triple Knot

Rice. 13. Triple helix

Rice. 14. Triscallion

All these symbols are usually applied to jewelry. However, items with some rare symbols can be difficult to find in stores. Therefore, you can draw any symbol yourself on wood, clay, stone or even on a piece of paper and carry it with you as an amulet.

From the book Volume 7. Planetology, part IV. Pluto, Chiron, Proserpina, Lunar Nodes, Lilith and Lulu author Vronsky Sergey Alekseevich

4.1.1. ascending Lunar Node in the sign of Aries. Descending Lunar Node in Libra B past life a person could not establish himself in life, but was forced to live as his environment and circumstances demanded of him. He wanted to please everyone, wanted to please everyone, and, in the end, was

From the book The Rule of the Three-sided Nagual author Torres Armando

4.1.2. Ascending Moon Node in the sign of Taurus. Descending Lunar Node in Scorpio The Descending Lunar Node in Scorpio has accumulated so many different impurities in the past that the soul began to suffocate and decided to cleanse itself and get rid of everything. These people have gone through hell

From the book On Distinguishing Consciousness and Primordial Awareness. On the Essence of the Tathagata author Dorje Third Karmapa Ranjung

4.1.3. Ascending Lunar Node in the sign of Gemini. Descending Lunar Node in the sign of Sagittarius These are people who are intoxicated with freedom, space, and a frantic gallop. They crave new knowledge, new experiences, trips, travels, adventures, good old adventures. They find it difficult to live in

From the book Astrology Name author Globa Pavel Pavlovich

4.1.4. Ascending Moon Node in the sign of Cancer. Descending Lunar Node in the sign of Capricorn In a past life, the individual was a materialist, he learned to achieve his goal, to go to the goal stubbornly, without doubts about the purity of the means. For the sake of achieving it, he spared neither himself nor others. His ambition

From the book Basic Occult Laws and Concepts author Danina Tatiana

4.1.5. Ascending Lunar Node in Leo. Descending Lunar Node in Aquarius People with this arrangement of Nodes in a past life were too dependent on other people. They fought for freedom and independence, were carried away by the ideas of brotherhood and equality of all

From the book of Anapanasati. Practicing Breath Awareness in the Theravada Tradition author Buddhadasa Ajahn

4.1.7. Ascending Lunar Node in the sign of Libra. Descending Lunar Node in Aries In the past, this was a strong personality with a developed, almost violent individualism. Depending on the fields of the horoscope, this is a former ruler, leader of a political party, commander, boss,

From the book Encyclopedia of Witchcraft and Divination author Ison Kasandra

4.1.9. Ascending Lunar Node in the sign of Sagittarius. Descending Lunar Node in the sign of Gemini In a past life, the individual neglected his talents and abilities, he led a frivolous lifestyle, lived under the guise of a joker. His interactions with people were superficial,

From the book Practical Healing. Healing through harmony author Sheremeteva Galina Borisovna

4.1.10 Ascending Lunar Node in the sign of Capricorn. Descending Moon Node in Cancer In a past life, the individual was too attached to the parental home, where he existed from birth until the end of his days. The parental home became for him that fortress, the walls

From the author's book

4.1.11. Ascending Lunar Node in the sign of Aquarius. Descending Lunar Node in the sign of Leo In a past life, a person, as they say, lived for himself. He knew how to show himself in front of others in the best light and use people for his own purposes. Thanks to his will, energy, artistry and

From the author's book

The Triple Nagual “The rule is final, but its design and arrangement are constantly evolving. But in contrast to what supporters of evolutionary theory say, who believe that with the adaptation of life, the accumulation of genetic mutations occurs in a random order, seeing

From the author's book

4.4.6.2. The Triple Meaning of Impermanence [Karmapa] says: They have three impermanent ones: The emptiness created by the mind (bios byas) is not permanent, Archium and moving thinking are not permanent. The made-compound six bands are not permanent. These three have

From the author's book

The Triple Code of Fate The numbers that follow from the name, surname and patronymic can be comprehensively explored. With the help of numbers, the essence of fate is revealed, which is hidden behind outside events that happen to a person. The number reveals the true essence of all things, its

From the author's book

13. The triple meaning of the concepts "Matter" and "Spirit" Some concepts in the occult literature have a double, and sometimes a triple meaning. This feature applies, for example, to such terms as "Brahma's Night and Day", "Brahma's Inhalation and Exhalation", "Evolution" and "Involution".

From the author's book

The Heart of the Triple Jewel A further benefit is that anapanasati brings us easily, completely and perfectly to the triple jewel (tiratana), the three Buddhist sanctuaries. The reason for this is that the essence or core of the Buddha, Dhamma and Sangha is

From the author's book

Triple Magic Circle Three is a sacred number in magic and for special ceremonies, you can arrange a triple circle for energy and protection. The number "three" represents the three aspects of the god figure in many religions: the Holy Trinity, the Triune Goddess, and the three phases

From the author's book

The Triple Warmer The triple warmer is the most complex organ and therefore the easiest to unbalance. This organ consists of three parts and connects the entire body (Fig. 20). It can be unbalanced, and then the failure of energy manifests itself in one of its parts.