Electronic fishing rod for winter fishing. There would be good luck, but the fish will be, what kind of fishing rod to catch in the winter

In the fishing shops of our time, the assortment fishing tackle huge for ice fishing. However, some anglers practice making winter rods. various types with your own hands.

A homemade winter fishing rod is made in the following cases:

there is no desired model in the store;
not near a shop, typical for the countryside;
the habit of doing everything with your own hands at home;
savings.

Making most gear for winter fishing does not require the use of any rare materials, everything you need is in the arsenal of any do-it-yourselfer.

We will look at how to make three types of fishing rods in our article:

for mormyshing;
for glitter;
I will put.

remothless

The first homemade winter fishing rod, the manufacture of which we want to consider, is jigging. This is the lightest tackle in terms of weight and the selection of materials for it is not difficult. To make a revolver, we need:

champagne cork or thick foam;
plastic knitting needle from an umbrella or other similar rod;
a set of cambric;
lavsan or x-ray;
glue and colored markers.

In the description of the process of making fishing rods, we will mention nods in passing, since this is a separate big topic, and it requires writing a separate article. With regard to the revolver, let's say that for this fishing rod it is easiest to cut it out of Mylar or X-ray film, and assemble the fasteners from cambric of different diameters.

Do-it-yourself winter fishing rod for mormyshing is made in the following sequence:

We grind the handle of the fishing rod from cork or foam plastic. To do this, we chamfer one side of the cylinder to make it look like a skirt.
We drill a hole in the cork.
Glue or firmly insert the whip into it.
We mount a nod.
We wind the fishing line and.

A note regarding the attachment of the whip to the handle. There are two options at the request of the angler:

at the end of the cork;
side of the cylinder.

In the second case, it is possible to drop the turns of the fishing line, which helps when playing a large trophy.

For nozzle mormyshka

In the attachment version of jig fishing, a home-made fishing rod of a more voluminous design is used. Its handle is cut out of foam, cork or wood in the form of a bracket, this form is called a “filly” in the fishing environment. A groove is cut in it for winding the fishing line, getting a kind of reel. A hole for the whip is drilled in the front end.

A whip for a winter fishing rod of this type is bought in a store or they use knees from broken fishing rods, or they simply cut a branch from a tree, as they did in the old days. A nod is also made from improvised materials:

metal spring;
lavsan or x-ray film;
from a plastic bottle.

The nod holder is constructed from cambric or high-voltage automotive cable.

Universal postavush

We called this type of rod universal, because its use is diverse. Based on this design, you can assemble tackle for such types of winter fishing as:

float;
for flow;
for light shine;
live bait fishing for perch;
put on rotan or pike perch.

To make it generic you can use different materials, we will consider one of the options with a mention of opportunities for expanding the range.

The material for the handle of such a rod can be a simple plastic tube with a diameter of 15 millimeters. The manufacturing process in this case can be described in the following steps:

Cut off a piece of 15 centimeters from the tube.
At the front end we attach a coil or two wire staples as a reel.
We insulate the handle by gluing cork, polystyrene or synthetic isolon on it with the non-foil side out.
We plug the ends of the tube with plugs, we first put a weight in the fishing rod for the current to resist tipping over.
In the cork of the front of the tube, we drill a hole for the whip.
We insert a whip, its options are described in the previous part of the article.
We make legs, they can be made from wire, a piece of plastic and so on.
If necessary, we equip the fishing rod with a nod or access rings.

Spinner for lure

This type of winter fishing rod is similar to the universal fishing rod in terms of manufacturing method, but its production requires a more careful approach due to the greater responsibility of the tackle when using baits in fishing on big fish. Therefore, we will describe the process in more detail, revealing some of the nuances.

Let's start with the manufacture of the handle. It can be made from the same plastic tube, umbrella handle, garden sprayer or something similar.

It is important for us to make it comfortable and warm.

Let's use a cork for this. The process of warming the handle looks like this:

Chop the cork with a rasp or grater into small pieces.
We coat the tube along the length of the future handle with glue, skip the place under the coil.
We roll it on a crumb.
We wait for complete drying and again spread and roll.
Upon reaching the required thickness of the handle, we process it first with a rasp, then with a file and skins of different grain sizes.

At the end of the creation of the handle, we attach the coil. To do this, we mount a reel seat of two clamps to the tube, between which we clamp the legs. From above we wind up an insulating tape to exclude contact of hands with cold metal.

It is impossible to make a coil with your own hands at home, so you need to purchase one of the options in the store:

plastic inertia;
"meat grinder" with a small spool;
small multiplier.

We close the ends of our handle with corks, in the front we make a mounting hole for the whip, where we insert it, its length should be 60-70 centimeters.

Now you need to attach access rings to the whip, there should be at least three of them. We mount the tulip on the tip, distribute the rest along the length of the form. For fastening we use glue, threads and fishing varnish.

We finish making a lure fishing rod by strengthening the nod, if it is required, many fishermen do without this element of tackle.

Self-hooking

Another type of winter fishing rod is a self-hooking rod. This is a kind of postavush, designed to respond to the smallest pulls of fish, which for some reason may not be noticed by the angler.

There are several designs of self-cutting gear, we will describe in detail one of them.

It is not difficult to make such tackle for winter fishing. It is enough to have a piece of wood, plywood or chipboard for the base, a few screws and two types of wire: thin for making springs and thick for levers.

To begin with, we cut out the base in the form of a rectangle with sides of 10 by 25 centimeters.
We draw a design diagram on it.
We fasten at one end the brackets for attaching the lever.
On a thick wire we wind a thin coil to coil to create a spring.
We bend a thick wire in the form of a lever of the desired shape.
We fasten the lever with the spring to the base.
We bend the locking bracket from thick wire.
We strengthen it in front of the base.
At the end of the locking bracket, we strengthen the elastic band, fixing it for clarity with multi-colored electrical tape.
We mount the coil and suspension for the chandelier to the base.
We wind the fishing line and pass it under the suspension bracket and along the top of the locking bracket.

The actuation tension is adjusted by mutual adjustment of the spring-loaded lever and the locking bracket.

When pulling the fish by the hook, the fishing line presses on the locking bracket, forcing it to move forward and release the hook lever.

The electronic winter fishing rod is a symbiosis of winter fishing gear, as well as modern technologies. The phrase "electronic ice fishing rod" evokes mixed feelings. It immediately seems something poaching, forbidden. But immediately after this feeling, there is an interest in such an unusual fishing tool. And yet, sooner or later, you will have to face such a device. Therefore, you need to have at least a general idea about this device.

It has long been noticed by fishermen that frequent twitching of the tip of the rod causes some types of fish to actively peck.

Amplitude fluctuations of the gatehouse create vibration of bait or bait under water:

Effective fishing requires uniform oscillation at both the top and bottom points.
The main difference between these two rods is the driving force. In the first case, the fisherman's hand serves as the source, and in the second case, the vibrations are transmitted using electrical impulses converted into mechanical vibrations.
The electrical circuit along with the power source is located inside the rod handle. As a rule, power is supplied from one rechargeable finger-type battery.
Modern models allow you to adjust the oscillation frequency.

Some mistakenly believe that this unit is a device for the lazy. This is not entirely true. It is difficult for a person to provide a stable amplitude. The electronic device copes with this task much better.

Modern technology is sometimes ahead of its time. Some people seek to use these technologies in their Everyday life. Others, on the contrary, have a conservative attitude towards all innovations. Fishermen are no exception.

No one is agitating you to use an electronic fishing rod instead of an ordinary one.

However, there are a few facts you should be aware of:

The electric mechanism never gets tired, unlike the angler's hand. However, you will have to take spare batteries with you when you go fishing.
A person is not able to provide a constant maximum frequency of oscillations. This is especially true for older fishermen and people who have suffered various injuries. But experienced anglers have in their stock posting techniques that are not subject to mechanisms.
An electronic device requires certain knowledge and careful attitude. Do not allow water to come into contact with electronic components. On the other hand, experienced fishermen always want to try something new.
No one forbids combining fishing with several electronic and one manual fishing rod.

To understand the correct process of fishing with a reelless rod, beginners should first practice on regular rods. And only having a certain skill, you can move on to the advanced version.

Large fishing stores carry various models of electric rods.

They have a certain set of characteristics:

appearance and dimensions;
material of manufacture;
the presence of moisture-proof and impact-resistant properties;
capacious battery.

On the net you can find ways to make electronic fishing rods with your own hands. You just need basic knowledge of electronics.

I would like to mention the time-tested electronic winter fishing rod "Luck". It is a typical fishing rod in the form of a balalaika. Production material - the made foam plastic.

Its advantages are:

Such an electronic winter fishing rod "Luck" is quite simple and light. Very easy to operate.
Not afraid of moisture and does not sink.
Has a clear interface. Three buttons and three operating modes respectively.

If you are an experienced angler and have not yet tried fishing with an electronically powered rod, then you are guaranteed a lot of new experiences and emotions.

As you know, in mormyshka fishing, the most important thing is to work with a fishing rod correctly. If you are a beginner, then you need to study hard enough. Maintaining a certain frequency of oscillation is quite difficult. When fishing with a mormyshka, the nod for a winter rod should deviate from the vertical axis by a small distance, only a couple of millimeters, and this is very difficult to do manually. Therefore, fishing rods must be adapted to this. winter fishing received another technical novelty, this is an electronic fishing rod.

Fishing rod Kuusamo

Finnish rods

Fishing rods that are used for winter fishing must be chosen carefully. Of the products offered on the shelves, Chinese-made designs do not deserve attention. These are cheap models that can only be used once, and even then by an inexperienced beginner. But Finnish ones are in great demand among fans of ice fishing. But no one can give you a guarantee that a good-looking rod will not let you down in working conditions. Everything is tested in practice. Here are some Finnish models that perform well: Kuusamo Vapa 2 is a good lure rod and Kuusamo Vapa 5 is better for passive jigging. Teho models are very popular, they have a good hard rod and a reel with a soft stroke. Delfin and karismax are the best Finnish fishing rods.

Finnish fishing rods

float

Most beginner anglers use winter gear for the first time. float rod. Later, having already gained some experience, they switch to jigging gear. A winter float rod is usually equipped on its own, as ready-made designs will disappoint you. The simplest design with float equipment is the “filly”, in which the fishing line is wound on a reel. For such equipment, you can use the "balalaika" design. Increased demands on such equipment are presented. It should not have "memory", not twist.

Sports

There is also such a category as winter sports fishing rods. They are lightweight and highly sensitive. So, for example, Megatex Success weighs only 12 grams. For sport fishing, the balalaika design is used with an improved sealed reel so that moisture does not get in there and the reel does not jam. An example is the winter fishing rods of the Salmo brand. Lightweight and comfortable with an open spool that allows you to control how the line is wound. You can catch on a thin line, because the presence of a reliable friction clutch will not let it break even with inept hooking.

Sports

Nod selection

For winter fishing rods, such tackles as nods were specially invented. Otherwise, this tackle is also called the gatehouse. The material from which such a lodge for a winter fishing rod is made should not be afraid of either water or frost. When choosing this gear, you must observe the golden mean: an inflexible or too soft nod will not recognize a bite well. Fishing rods for mormyshka fishing are equipped with a nod made of boar or lavsan bristles. If you are fishing with a lure, then a nod from a spring will be suitable.

Coil selection

When buying, you need to look at how it is installed for a winter fishing rod. Pay attention that the gap between the drum and the housing is not visible. The locking screw must be made of metal or very hard plastic. Probably, there is no ideal reel, since in winter you have to catch on a very thin line, which often gets between the reel body and the drum. You have to unravel the coil several times in the cold. And if more water gets inside, the reel will freeze and stop the fishing line.

Electronic fishing rod

When fishing on, an electronic fishing rod used for winter fishing can come in handy. It is difficult for a person to maintain an oscillation rate of 300-400 times per minute, but such an electronic tackle will cope with this task. The number of vibrations can be adjusted from 100 to 500 times per minute.

"Luck"

Electronic winter fishing rod "Luck" greatly expands the possibilities of anglers. Electronic outwardly does not differ from the ordinary "balalaika". It is made of synthetic material, similar in its characteristics to foam, so it does not sink and is not afraid of moisture. Its weight is small, only 50 grams. The rod six is removable, but you can use any other. Its device has three control buttons, three oscillation modes. The winter fishing rod "Luck" works very simply. You have to turn it on or off.

Operating modes

The most favorable mode is when manual vibrations can be combined with vibrations of the rod itself.

You can just put the rod near the hole, there will be no vibrations, and the built-in sound and light bite alarm will let you know when the fish are biting.

The third mode is the alternate turning on and off of vibration. The vibration duration can be changed.

The fishing rod can work for about 1000 hours in the cold on a single charge.

Craftsmen can make a winter electronic fishing rod with their own hands. Watch the video to see how it's done.

In summer with a winter rod

It is also interesting that balalaika fishing can also take place in the summer, for example, from a boat. If you equip it with a hook, a leash and a sinker, without a mormyshka, then the tackle will quickly reach the bottom. Mormyshki in this process are superfluous. Fish in the summer do not have enough bait, but suck it in with water and immediately recognize heavy tungsten baits. The hook is more catchy in summer. But what creates inconvenience is the location. With one hand you need to lean on the boat, and with the other do the wiring. But still worth a try.

Folk sign: Never give your fishing rods to someone else's hands, as if there will be no bite!