For several years in a row, our country has been in an era of crisis. Prices for all products are growing at a high rate, but the level of salaries leaves much to be desired.

Economic problems have affected every class of society, everyone has to limit their interests and, to some extent, change their lifestyle. Difficult times have also touched lovers of fishing.

Not every person can buy branded goods in a store. Accordingly, you have to turn on your imagination and make items for fishing on your own.

The simplest, but at the same time extremely necessary thing is a spinner.

There are several advantages of homemade spinners:

• Ease of manufacture;
• The minimum cost of financial resources;
• The possibility of using improvised means;
• Expansion of space for experiments;
• The possibility of creating an individual design;
• You can prepare a lure for fishing without leaving your home;
• Ability to create an unlimited number of items.

Homemade spinners, if properly made, can replace the most expensive branded product. There is a universal fishing tackle suitable for any kind of fishing. It is also called "torpedo".

It sinks along the vertical axis and can spin even with a slight deviation.

To create a universal spinner, you will need the following materials:

1. Thin metal, it is desirable to choose a stainless material. For example, you can cut an aluminum container into several parts. From it you can make several identical gear;
2. Guitar string or thin wire;
3. Swivel in two copies;
4. Paste GOI;
5. Factory rings.

Manufacturing process:

1. The first stage of work is the creation of a template for the future baubles. The outline should be carefully cut out of aluminum. It is advisable to first draw it on thick cardboard, and then transfer it to the main material. For convenience, at this stage of cooking, you can circle the outline of a tablespoon;
2. This piece needs to be folded in half. to get two absolutely equal parts;
3. The remaining edges on each side should be treated with sandpaper;
4. Solder fasteners to the aluminum template. It is created from two swivel connected by a thin wire. If there is an unnecessary string from a guitar, then it is better suited for this purpose;
5. The spinner is ready and you can use it in this form. If it is ugly, then you can give it shine by applying GOI paste. Experienced fishermen claim that during fishing, the fishing line can break when it collides with a lure. To prevent this from happening, you should additionally attach winding rings. Also, for ease of use, you can sow several layers of solder.

Creating a versatile fishing tackle will only take a few hours.

Making a spinner

For Russian fishermen, an indispensable item is the Karasik lure.

It is under this name that it is sold in the store. But, if you wish, you can do it yourself.

Its distinctive feature is that when jerking, it can swing strongly to the sides, and then sink to the bottom.

Materials:

1. Copper is the main material. For one bait, you should prepare a small piece;
2. Hook;
3. metal plate;
4. Mounting ring;
5. Drill.

Manufacturing process:

1. First you need to draw a template. This can be done with a marker on the main material. You should draw a rhombus of the required size;
2. Next, you need to carefully cut the workpiece, using sharp scissors;
3. On the template, you need to draw a smaller axis and bend it along this contour;
4. The workpiece must be turned into a horizontal position. It is necessary to solder a triangular-shaped metal plate to the lower part, it is better that it be small;
5. A hook should be soldered to it;
6. Solder the mounting ring to the top and drill a hole for the fishing line;
7. The spinner is ready, if necessary, you need to additionally process it with sandpaper.

From the technology of the process, it becomes clear that a minimum amount of material is required, which can be found even at home. Accordingly, the creation of spinners practically does not require any costs.

But, at the same time, the bait is of high quality and can be used for a long time.

Lures for fishing in troubled waters

Before proceeding to the stage of making spinners, it is worth identifying the features of muddy water. What is bait for? Its main need is to attract the attention of fish.

It is quite easy to catch an individual in clear water, for example in a lake, as it can be seen very well, and it recognizes the bait.

But, most of the rivers in our country have muddy water, and a huge number of fish accumulate in it.

They cannot see the usual bait, so you need to create a lure from a special material, for example, having a chrome surface.

Materials:

1. Main material. A chrome-plated pipe cut into two parts is ideal as it;
2. Knife or scissors for carving metal;
3. Sandpaper;
4. Drill;
5. Soldering tool.

Manufacturing process:

1. The prepared piece of chrome-plated pipe or other source material should be unbent or, conversely, bend to obtain a slight bend;
2. It is necessary to draw a template on it and cut it according to the sample;
3. It is desirable to give the workpiece a rounded shape, which will resemble a small fish;
4. To the end, which has a larger diameter, a hook should be soldered;
5. To prevent breakage of the fishing line, you need to process the edges with sandpaper;
6. A small hole should be drilled on the narrow part, into which the fishing line will be inserted;
7. The spinner is ready, if desired, it can be additionally smeared with paste.

This lure is great for perch fishing.

Homemade spinner

Many men are interested in such a type of fishing as fishing with a load-head. It is for her that you will need to make a spinner. It is the most attractive for fish, respectively, you can get a big catch.

Materials:

1. As a basis, you can use any material of a cylindrical shape. It is desirable that stainless steel act as it;
2. Drill;
3. soldering iron;
4. Decorative elements.

Manufacturing process:

1. It is worth considering carefully in the choice of the main material. As already mentioned, it can be a cylindrical shape. The main requirement is weight, it is desirable that this weight instantly sinks to the bottom. You can first try it in action in a bath filled with water. If he lingered afloat, then he is categorically not suitable for creating a spinner;
2. A hole needs to be drilled in the material so that a thick fishing line can be passed through it;
3. The hook should be soldered so that it is directed towards the sinker;
4. If necessary, you need to glue beads, rhinestones to the cylinder or tie it with threads, this will additionally attract the attention of the fish;
5. You can also cover the surface with paste, for extra shine.

Such a spinner will rotate and at the same time create turbidity in the water. Accordingly, you can easily catch a catch. It is worth noting that in all its properties it will not be inferior to branded counterparts.

How to make a do-it-yourself spinner?

The main problem of any fisherman is that the fish is almost close, but it is not possible to catch it.

It is in this situation that you can use the unhook. It is beneficial to use it in a place where there is a large catch.

Materials:

1. Steel wire, the diameter of which is 0.5 or 0.3 mm;
2. tendrils;
3. Spinner analogue;
4. Hook;
5. Soldering iron.

Manufacturing process:

1. You should take a hook and solder an analogue of a spinner to it. It can be purchased at any store at a fairly low price. It is also called a double;
2. WITH inside antennae should be attached, so that they are directed to the base of the spinner;
3. In conclusion, the structure should be soldered to the wire.

How to make a lure for pike perch with your own hands?

Pike perch is a fish that every fisherman dreams of. Catching her is a real pleasure. It is important not only to know where he lives, but also what is the right way to catch him.

The shops are dominated by a large number of devices for fishing. But, if you wish, you can do it yourself.

Materials:

1. A paper clip or thin wire, of the smallest diameter;
2. Hook number three;
3. Metal plate;
4. Bead;
5. Soldering iron.

Manufacturing process:

1. The template must be drawn on cardboard and transferred to a metal surface. You can use a canned food jar as it. The workpiece should be carefully cut and processed with sandpaper;
2. It is necessary to drill two holes on the surface for the fishing line and connect them together;
3. Pull the wire through the holes and pull the hook on it. so that it is in a hanging state;
4. You need to solder a small bead to the axis;
5. The lure needs to be additionally decorated, since pike perch is one of the most selective individuals.

In conclusion, you need to blow on the fishing tackle, with proper manufacture, it should spin.

How to catch more fish?

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective ones:

1. . Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates their appetite. It is a pity that Rosprirodnadzor wants to ban its sale.
2. More sensitive gear. Reviews and instructions for other types of gear you can find on the pages of my site.
3. Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

Homemade lure for pike from a usually aluminum spoon

Sometimes, to attract such a successful fish as a pike, you can use improvised means, for example, an ordinary tablespoon.

Materials:

1. Tablespoon;
2. File;
3. Hammer and nail;
4. Hook;
5. Rings.

Manufacturing process:

1. You should cut off the handle from the spoon and process the remaining surface with a file;
2. You need to attach a hole in it;
3. Next, rings should be attached to it.

The procedure for preparing such a spinner will take no more than 10 minutes.

Summing up, it is worth saying that the bait even for the most big fish you can cook it yourself, while doing almost no cost.

How long have you had a really BIG CATCH?

When was the last time you caught dozens of HEALTHY pikes/carps/breams?

We always want to get results from fishing - to catch not three perches, but ten kilogram pikes - this will be a catch! Each of us dreams of this, but not everyone knows how.

A good catch can be achieved (and we know this) thanks to good bait.

It can be prepared at home, you can buy it in fishing stores. But it is expensive in stores, and to prepare bait at home, you need to spend a lot of time, and, to be honest, homemade bait does not always work well.

Do you know that disappointment when you bought bait or cooked it at home, and caught three or four bass?

So maybe it's time to use a really working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

It gives the very result that we cannot achieve on our own, all the more, it is cheap, which distinguishes it from other means and there is no need to spend time on manufacturing - ordered, brought and go!

Of course, it is better to try once than to hear a thousand times. Especially now - the season! When ordering, this is a great bonus!

Learn more about bait!

In the house of every angler there is a whole mass of items that are suitable for self-made gear. In the presented material, I would like to talk about how to make a lure from a spoon. Let's look for an answer to this question next.

What are the benefits of making your own spinner?

As practice shows, to make a lure with your own hands using an ordinary tablespoon as a basis is within the power of each angler. To this are added insignificant cash costs, which will only be spent on the purchase of small components for creating tackle.

How to make a spinner from a spoon? In the process of studying this issue, the master opens up a wide scope for all kinds of experiments, the implementation of original ideas and the manifestation of fantasy. Thus, you can create an unlimited number of gear, each of which will have its own characteristics.

materials

How to make from a spoon? This will require the following:

• the spoon itself, made of stainless, rather thin material;
• thin wire;
• clockwork rings;
• triple hook;
• several swivel.

Base selection

How to make a spinner from a spoon? Before proceeding to specific actions, it is necessary to choose a suitable item that will act as the basis of the tackle. The best option is to use a small dessert spoon. The canteen can be too heavy and large, so it will be good for hunting only large predatory fish.

Choosing a teaspoon will allow you to use tackle on the least powerful spinning rods. Its small size will allow you to catch relatively small fish: perch, chub, asp.

As for the nature of the metal from which the spoon is made, here you can give preference to any alloy, from stainless steel to silver. A file, pliers, hand or electric drill may be required to process the material.

How to make a spinner from a spoon with your own hands?

First you need to separate the handle of the spoon from its rounded part. To do this, you should use a file, outlining the place where the cut will be made. It is desirable to separate the handle of the product with some allowance. This will leave enough space for punching holes for the winding rings.

It is convenient to separate the handle from the spoon with a hacksaw. Having coped with the task, all defects and roughness must be leveled using the same file. The remaining stalk is not recommended to be sent to the scrap. If desired, you can also make a pretty good long-range lure out of it. However, we will talk about this later.

Next, you need to make holes along the edges of the rounded part of the workpiece with a drill. To do this, you should select a drill of such a diameter that the winding rings freely enter the holes formed. Before resorting to drilling, it is worth clamping the spoon in a vise. If this is not possible, you need to find an assistant who will hold the workpiece with pliers. Burrs at the drilling points can be removed with a file.

Then it is enough to take a few clockwork rings and connect them to the workpiece. In this case, it is not recommended to use too small rings. Because they can prevent the free swing of gear in the water.

A tee should be used as a hook. Its size should correspond to the dimensions of the homemade gear. The hook must be connected to the swivel, which should be fixed in the hole on the workpiece with a wire.

Spoon bait

So we figured out how to make a spinner from a spoon, namely its rounded part. Now let's look at the features of making tackle from a handle.

To increase the catchability of the bait, it is necessary to bend the handle of the spoon at the ends. Using the same drill, you need to make holes in them for fixing the fishing line and hook. The hook is recommended to be installed on the wide part of the handle. In this position, a homemade spinner will look more like a small fish.

Additional equipment

Having figured out how to make a spinner from a spoon, you should think about equipping its tee part with an additional bait. As the latter, you can use shiny tinsel or the so-called vibrotail. A bright woolen thread is also suitable for this.

On the surface of a homemade spinner, you can mark the eye of a fish. In addition, it is worth painting one side or drawing transverse stripes here. All this will increase the number of bites.

Finally

The spoon lure to this day remains one of the most effective gear for catching large predatory fish. As you can see, it's not that hard to make. with my own hands, taking as a basis an ordinary tablespoon. Such a bait swings smoothly in the water, reminding the predator of a small weakened fish, and causes him an instinctive desire to grab the prey.

Fishermen like to ask each other the compromising question “What are you fishing for?” My husband, a lover of fishing and a connoisseur of subtle linguistic humor, once answered such a sufferer: "For five kopecks."

This is how the idea of ​​creating a spinner from a five-kopeck coin arose. It is a universal option for both summer and winter lure of grass pike.

Homemade lure for catching pike - grass

How to make this bait yourself, with your own hands?

For work and making do-it-yourself spinners for pike grass we need

• metal scissors,
• pliers,
• pliers,
• flat file,
• drill driver,
• drill for metal with a diameter of 1 mm,
• 5 kopeck coin (preferably clean and shiny),
• shop hook tee,
• winding ring,
• leash.

Cut off the edges of the coin with scissors to make a rhombus.

We process the edges of the product with a needle file and give the spinner rounded shapes.

Despite the fact that the coin metal is strong, it grinds quite easily. Holes need to be drilled at the sharp corners of the mormyshka. To do this, we use a drill-driver and a prepared drill.

To make it more convenient to drill, we put a small board under the workpiece, and we will hold the product itself with pliers or round-nose pliers so as not to burn our fingers - the metal heats up during drilling.

The drilled edges of the holes must be processed with a needle file.

Now we bend the mormyshka in the form, that is, we take its sharp edges to different sides from the center.

We attach the winding ring to the finished product, at the same time clinging the tee to it. On the other side of the spinner we attach a leash.

At every angler in the arsenal is a lot of lures for catching fish. But I have always been attracted to fishing by original gear made by myself. And in the networks of the World Wide Web there are a lot of interesting, home-made wobblers, turntables, oscillators, spinners. In addition, they are very often lost during fishing, and as a way out, you can make homemade baits a lot. Today we will talk about some of them in this article.

To make a spinner from a can, we need the following materials:

• Empty pepsi or beer can
• Tee with line
• Load - pellet
• metal wire

Making a spinner from a tin can:

1. We put a picture of a fish on the jar. Carefully, so as not to cut yourself, we cut our workpiece out of tin with scissors.
2. With a hammer, we level the workpiece so that it acquires a flat surface.
3. We drill three holes with a drill with a diameter of 1-2 mm, or we punch with a core, a nail, but be sure to remove sharp edges. We will pass a hook with a long forearm through them, and accordingly the lure will acquire a wavy surface.
4. In order for the spinner not to deform during the nozzle, we maintain the distance between the holes according to the number and size of the hook.
5. For a rigid attachment of the hook to the lure, wear colored cambric.
6. The fishing line can be attached to the lure with a winding ring or carabiner.

Now let's look at how to make a rotating spinner from a tin can.

1. We make a straight blank from a tin can, on which we draw a marking in the form resembling a butterfly, with a rectangular bar and two symmetrical petals.
2. Carefully cut out the future lure with scissors.
3. He makes three holes on the bar, and we bend it so that we get a square, and the holes are symmetrically opposite each other. We pass steel wire through them, put multi-colored beads and a sinker on it.
4. Using round-nose pliers, we twist the upper end of the wire into a ring, and on the lower part we make a fastener for attaching the hook.

The spinner is ready, you can test its effect on fishing!

E I also want to offer an option on how to make a spinner from a metal beer cap.

For its manufacture, we need tools and such materials:

• Beer metal cork
• Lead shot or metal balls
• clockwork rings
• Tee
• Metal wire.

Making a spinner from a metal cork:

1. We punch two holes symmetrically on the side surface. We pass a metal wire through them, at the ends we make rings with round-nose pliers. We insert the clockwork rings so that they move freely.
2. We put metal balls inside the cork, about five pieces.
3. In the places of the locking rings, we bend it in half so that the balls are securely inside, but at the same time they can move freely and make sounds. They will serve to create a weight and sound effect to attract fish.
4. We insert the tee into the winding ring and the swivel with a clasp.

Our miracle spinner is ready!

TO as you can see, it is not difficult to make such unpretentious gear yourself, and besides, they are very economical and everyone can make them on their own.
According to the observations of anglers who use such homemade baubles, the fish reacts with pleasure to such homemade products, which means that the catch will be excellent.

When you get the blanks in the right amount, look for a hacksaw, a drill with metal drills, a file and a wooden block, sandpaper, pliers, round nose pliers.

1. First stage. We take a spoon and cut off the handle with a hacksaw. First you need to make a markup with a marker or pencil, and we already make a cut along it. It is better to make a cut so that a small tail of 5 mm remains. It will be more convenient to make a hole on it. After that, we take a file and grind the bumps and smooth out the roughness. If there is a machine with a circle for sharpening knives, then it is better to do this work on it. It will be faster and you will get a beautiful petal. It's better not to throw away the handle. From it you can make a jig for catching zander.
2. Second phase. We make a hole in the petal. For this operation, we need a drill and a metal drill with a diameter of 2 mm. Make a mark with a marker and start drilling. To prevent the workpiece from slipping, it is better to clamp it in a vise. When we drill, we do not press with all our might. It is better to use a high-quality drill so that it normally processes metal. They made a hole in one place, proceeds to drill a hole from the opposite side. It should turn out something like this.

1. Third stage. The holes need to be cleaned a little with a thin needle file so that they are smoother. After this operation, we insert a winding ring with a tee into one ear, and either just a winding ring or with a swivel into the other. As a result, we will get such a spinner-oscillator.

Making spinners from a sheet of metal step by step instructions

A more complex way to make oscillators from a sheet of metal. However, in this case, you can make petals of different shapes, sizes and weights. Industrially, such products are made by cold stamping. The result is petals of regular shapes and weights.

At home, the petals for vibrators are made from a sheet of copper or brass with a thickness of 0.2 or 0.3 mm.

First, create a petal template. You can make several templates from cardboard. Next, we fit the template to the sheet, circle it and cut out the blank. For example, for pike perch, we want to make an elongated oscillator. This is how the petal turned out:

After that, we must clean it well. We take fine sandpaper and go over the entire area of ​​\u200b\u200bthe petal and along all its edges. As a result, we should get a beautiful blank:

We specially leave spots on it so that during postings an attractive animation of the bait is obtained. Next, we need to draw a longitudinal axis through the center with a marker:

We make such a bar with an inserted clamp to fix the spinner while soldering the ring:

We also see a transverse cut at the end of the bar. In this incision, we insert the spinner to the axis and bend it a little. We get a trihedral petal.

Gently level the baubles on all sides with pliers. Then we take round-nose pliers and bend the nose of the petal a little inward:

You get this triangular shape:

After that, insert the petal into the clip in this way:

We lubricate all surfaces of the workpiece from above and below with a flux solution and apply a thin layer of tin. You will get such a shiny silver contraption:

After receiving the rings, they must be lubricated with flux and soldered to the spinner. The soldering process will go quickly and correctly if you use a good flux and a suitable tip:

The most subtle and difficult moment is to simultaneously solder the second ring and load the lure. Since we are making a lure for zander, it must be heavy. Inside the spinner you can put tin or lead, or both. Then it is necessary to melt the metals so that in the end they fill the volume of the spinner. This is how this procedure will look like if you put a piece of tin inside:

After we put the tin, we insert one end into the clamp, and hold the other with round-nose pliers along with the ring:

We melt the tin with a soldering iron and see that it completely fills the volume of the spinner. If there is a lot of metal, then the excess will pour onto the bar. If it's enough, we'll add more. If there is lead, add it. It melts faster than tin. As a result, we should get such a heavy lure filled to the brim.

Now you need to solder another ring in the other edge. We rearrange our spinner in the clamp with another ring and solder the second ring:

After that, we will only have cosmetic processing of the received bait. We take an sandpaper or a polishing tool with a fine nozzle and polish our trihedron to a shine.

The final step is to thread the winding rings and insert the tee. You will get such a lure:

Please note that the rings must be soldered strictly in the center, along the axis. Thus, we will get a balanced bait that will not dangle from side to side during postings. It is extremely important to get a petal that is ideal in geometry and volume. The more “correct” we have the blank, the better the vibrator will play.

Simple options for how to make do-it-yourself oscillators

There are many ways to make spinners. Some anglers make wooden matrices and bend copper and brass blanks into them, thus obtaining petals. But all this takes a lot of time and not everyone has the patience for such work. There are also simpler methods. The easiest is to take the same sheet of copper or brass and cut the petals into the desired shapes and sizes. Then we bend a little, if necessary, into boats or whatever you like in several planes. Then we make holes on both sides, insert the tee and the winding ring and the spinner is ready. The spinner can be made slightly heavier if a layer of tin is applied on top and bottom, as in the previous case.

If there are no sheets and teaspoons, it's a pity, beer caps will do. This, of course, is already impromptu, but active fish also take on such inventions. Moreover, if you have to catch in snags or grass, then such baits are just what you need. In general, a beer cap is taken and bent with pliers along the axis in this way:

You can make at least a kilogram of these in different colors, patterns, etc. Next, we make holes along the edges and insert a tee and a winding ring or swivel. The bait can be improved by pouring a little tin or lead inside. Before bending, you can put small metal balls inside. Get a noisy such bait. Who knows, maybe in the future manufacturers will be interested in such a model and make their own more advanced version of such a vibrator.

He will tell you about many popular tackle and devices for fishing.

We describe in detail living, vegetable, artificial and unusual.

In the article you will get acquainted with the main types, as well as tactics for their use.

Learn everything to become a real angler and learn the right choice.