How to make a fish trap. Homemade fish trap

The first way to catch fish was to use traps. The first of these were muzzles, tops and similar traps. Such traps can be left for a long time and do other things. Periodically, the traps just needed to be checked. The design of the traps implies their purpose. For example, there are muzzles for small fish and large ones. The first are mobile. They can be made of mesh fabric and are easily rolled up so that they can be easily moved. Large traps, such as muzzles, are made from flexible branches with large rings.

They move with great difficulty. Usually the fisherman leaves the snouts in the water, and then simply takes the prey. After that, the muzzle again plunges into the water. Thus, traps can be divided into stationary and mobile. The former are easy to move and can be carried with you, while the latter always remain in place. fishing. Mobile traps can be divided into tunnel and screen traps.

Stationary traps can be whole huge structures. One of the traps may look like a fence built in the lake. It can be a tricky maze for fish. It can be created at the place of high and low tide. The fish swims there, and after a while the damper closes. So she ends up in a trap. Some poachers block shallow river passages with nets. The fish gets there and is trapped. Such a labyrinth is called a katisk. There is a portable version of it called merezha. It is made from mesh fabric.

Above, a little was said about the top, in addition to it, there are such portable traps as a box, muzzle, head over heels. They are used in all fishing places in Russia. Fish enter them through a narrow mesh tunnel, which narrows as they enter.

Screen traps are a type of tackle that is designed to catch small nimble fish. These include tiny crucian carp, bleak, top melter. The mesh is stretched between the wire arcs. The mesh on wire arcs bends down so that the fish gets tangled in it. You can use the following technique. Bait and weights are placed in the center of the net. In places where fish are collected, they sink into the reservoir. This can be done in the bushes. Feed is also thrown from above into the water. Then you need to wait a while for the fish to gather. Suddenly the screen goes up. Now it's time to collect the fish in a jar.

The trap can be made from a large plastic bottle. In such containers, clean drinking water is sold in stores. The neck of a plastic bottle is cut off. Then holes are made in its body along the entire length. In the resulting glass after cutting, the neck is inserted backwards. In the bottle body, you can build a door to extract the fish. A strong cord is threaded through these holes or through the neck of the bottle. By the way, in one of the manufacturing versions, instead of a door, you can make a large incision on the body and use it to extract fish. Bait is also placed inside through the door. As a result, it turns out a good device for catching fish. It is better to place it against the current or in places of accumulation of crucian carp. Well suited coastal swampy places of rivers or stagnant ponds, lakes. You can watch the behavior of fish in a pond or lake. Find out where they are most concentrated.

A fish trap on a river is necessary if you want to catch a whole and unharmed fish. If fishing is a pleasure for you, you need a fish to release it, if you are catching fish for further resale in a live form, you do not want to injure it, then you need to use simple, effective and easy-to-use traps. They can be created from various materials.

How to make a fish trap from a plastic bottle?

Manufacturing plastic traps are in demand because this homemade model variant can be created anywhere. We take clean water in plastic bottles, they can be found in nature, purchased at the nearest store, borrowed from people resting nearby.

The plastic bottle fish trap is different in size. If you are planning a small catch, then take a base of 1.5-2 liters. If large production is expected, then 5-liter models will suit you.

Bottle washing. At first plastic attribute is thoroughly washed. It is important that there are no foreign odors on it. Remove existing stickers. If design prepared from a bottle of vegetable oil, then it can not be washed. This smell attracts fish.
Remove 1/3 of the piece. Remove part of the bottle from the side of the neck. The area of the structure to be eliminated depends on the volume of the future catch. As a rule, cut off 1/3 of the part, turn it over, insert the neck into the bottle.
Fixation. Homemade the model must be fixed in its original position. For this, wire is used. It is desirable to create from 2 to 4 fixation points. It must be borne in mind that this neck will then have to be removed. Therefore, do not overdo it.
Small holes. Fish traps on the river should have relatively small holes. Then the bottle can quickly sink to the required depth.
Bait room. In the created tackle a small amount of bait is placed. This speeds up the fishing process.
Adding cargo. It is best to put it inside the bottle. Such a load allows you to avoid hooks during the dive and the fishing process.

Everything, your fishing attribute is ready to be applied. Ways its uses are different. You can throw the model against the current, fix it with a rope on the shore. Can be dropped into standing water in any position.

How to make a fish trap from the network?

The fish won't stand a chance survival e, if you create a trap from the network. It needs a frame. You can create it from any solid improvised materials. It can be plastic, aluminum rods, corners, etc.

Stretching the mesh. A do-it-yourself fish trap is created from a grid in which the cells do not exceed 1 cm.
Funnel formation. It is necessary to create funnels from the same mesh as the fitting of the form.
We insert the narrow part of the funnel into the grid located on the frame. This must be done from two opposite sides.
Bait. When a fish trap is created, there should be no questions about how to use it. It is important to place the bait inside and lower the model into the water.
We lower the model into the water. If the frame of the trap is metal, then the immersion process should be very fast. With a wooden frame, it is recommended to place additional weight on or in the trap.

Types of fish traps

There are a large number of different traps that you can purchase from specialized stores or make your own. Consider briefly the most popular.

Stationary traps. They are made once and serve for many years. They are not lowered into the water - they are constantly in it.

Tunnel traps. It's a deadly fish maze. After the prey swims inside, it gets confused in the maze, does not find a way out of it.

Trap "spider". It consists of a screen and several arcs connected to each other at the top point.

Going for fish on a natural reservoir, do not forget about waterproof backpacks for fishing. In them you can save the bait. Even if there is a heavy downpour, all things that are will be safe and sound. You can always change into dry clothes, maintain your health and enjoy the exciting process of fishing.

A waterproof bag is the main assistant for any fisherman. If comfort and coziness are important to you, if you want to feel free at any body of water, then take care of accessories in advance that will turn the usual process of fishing into an exciting hobby that you cannot refuse.

Try making your own fish trap first in a familiar home environment. Here you have everything at your fingertips necessary items, improvised materials. Choose a trap that you would like to use in nature. After the skills are brought to automatism, you can try to make a trap near the reservoir, just before you start catching fish.

Initially, fish were caught using special traps, and only after that the well-known fishing gear. But some fishermen still use this old, but quite effective method of fishing. The main purpose of traps is to help catch live bait. The fact is that after being caught on a hook, the fish usually does not live long, and therefore quickly ceases to attract the interest of the fisherman's main prey. With the help of unconventional fishing methods, you can catch many more lures for big fish and at the same time significantly increase the effectiveness of fishing.

How to make your own trap

The design of the trap should be such that once in it, the fish could no longer get out. With the help of a cunning design, the fisherman has the opportunity to catch a much larger number of fish.
Now, to make a trap, you can use various improvised and unnecessary materials. Some anglers make traps out of vines, while others use nets that are stretched over a prefabricated wire frame, the latter favoring traps made from plastic bottles.

Plain plastic bottle trap

Thanks to modern achievements of science and technology, production began to produce products in plastic bottles of various shapes and capacities. Therefore, now you can easily find a plastic bottle and use it to make an effective trap.

The size of the bottle directly depends on the dimensions of the prey preferred for catching. For example, it is better to catch live bait with a small 1-2 liter bottle. Several large specimens are more convenient to catch using a 5 liter container.

Before proceeding with the manufacture of this type of trap, it is required to prepare a rope, wire and fishing line in advance.

At this stage, it is required to thoroughly clean the bottle from foreign objects and odors. The ideal option will use a plastic bottle from vegetable oil or water. When choosing a bottle from vegetable oil, you can not wash it, since the smell of oil is a kind of bait for fish;
Now you can cut off the neck about a third of the bottle and insert it with the neck inside the plastic container;
With the help of a wire, fix the cut off part in the most optimal place. It would be ideal to fix the cut off part in no more than four places. This will allow you to quickly and accurately remove the caught fish;
For quick dive it is recommended to make many small holes into the water. The holes will also help reduce the trap's resistance to water in the presence of strong currents;
At the penultimate stage, put the bait inside the trap and tie a weight and rope to it. To avoid hooks, it is best to fix the load inside the bottle;
It is necessary to throw the trap with the neck against the current. When fishing in a section of a reservoir with no current, the trap can be thrown in any position and a rope can be fixed on the shore.

Trap, which is a mesh box

For the manufacture of the frame of the box, you can use any material at hand, such as an aluminum corner, wood, plastic or aluminum water pipes, etc.

It is necessary to stretch a mesh of any material onto a pre-prepared frame, the main thing is that the cell size is no more than 1 centimeter. A metal mesh is also suitable for this trap;
Now two funnels are formed from the same grid;
Funnels must be installed and fixed on both sides of the box. The narrow end of the funnel should face the inside of the box;
We lay the most optimal bait in the trap.
The finished mesh box can now be immersed in water. If it is made of metal parts, then it will go under water by itself, and if it consists of wood, then in addition to it, it is required to secure the load.

homemade trap for fish, the article briefly talks about how to make a fishing “muzzle” out of pasture material. You will definitely catch it in your ear.

There is such a category of people who are ready to live in the natural environment while having a minimum of means for survival. There is some kind of extreme in this. And until you try this lifestyle (or games, whichever is more convenient for you), you won’t understand all the charm of this way of being. For example, in our team there are a variety of people: from very young people (18-19 years old) to adults under 60 years old, who occupy almost all social niches in “city” life (students, managers, directors, etc.). But we were united by the fact that several times a year we get together, plan a common route for several days, and hit the road. The main rule that everyone in our group follows is that we get food ourselves. We take almost nothing with us, only the most necessary, as situations are different. So, the ability to get food in a forest or on a pond is the key to survival in a difficult situation. Many people who in ordinary life did not believe in themselves, after such trips, gain some confidence in their abilities, which as a result affects their later life.

There are many ways to get food in nature. I will try to tell a simple method of extraction (capture), provided that you only have a great desire to stay with food, a desire to live, and trees growing nearby (ideally, spruce, pine, etc.). If there are trees nearby, you can build several devices with which you can actually catch fish. I'll tell you only about one thing - about the face. The muzzle is fishing trap, which in general terms is a cylindrical lattice structure, the neck of which is directed inward. The neck gradually narrows towards the base, not reaching the last by 20-30 centimeters. The fish swims into the neck, gradually moves towards the bottom of the structure, passes through the narrow part, and is no longer able to get back. A person can only pull his muzzle out of the water and collect the catch. Under normal circumstances, the bottom of the muzzle opens up to make it easier to reach the fish, but we will make the muzzle a more primitive type.

Making a homemade fish trap

So, the first step is to cut down a few young branches that bend well and twist them into a circle. The ends can be tied with thinner branches and pinched into a split. Then, from thinner branches, freeing them from needles or leaves, you need to connect the finished circles to each other so that the distance between them is about 30-40 cm. To give density to the structure, you can use several thick branches, which are fixed with thin ones along the round branches . The result should be a kind of mesh cylinder, the bottom of which is also covered with thin branches.

Now let's make the neck. To do this, you need to stick several dense sticks into the ground so that they form a kind of circle with a diameter of about 10 cm near the ground, and their top forms a circle comparable to the diameter of our cylinder. After that, you need to tie sticks with thin branches to get a mesh structure. Special care is not required here, the main thing is that the design has some strength. When the neck is ready, it is tied with thin branches to the upper part of the cylinder, not forgetting to secure and lower part neck beyond the middle circles of the cylinder. Everything, a homemade fish trap for fishing is ready. Ideally, the muzzle is tied with a rope and thrown into the water. But, you can do without a rope, just in this case you will have to climb into the water behind the muzzle to get it. Sometimes, in order to get the structure out of the water, we also use a pole, it all depends on the situation. Practice shows that such a home-made fish trap catches quite well, it is enough for it to stay in the water for about 3-10 hours. For those who are fond of the topic of survival, this skill will be interesting and useful, the trap making schemes are just below.

All the best to you.

Many devices have been invented for catching fish. There was a time when it was caught by hand and with the use of bone harpoons. Today they use nets and various rods. Judging by the numerous reviews, traps are quite effective when catching fish. According to experts, they began to be used much earlier than other fishing tackle.

Despite the fact that there is a wide range of branded accessories on the shelves of specialized stores, many consumers are wondering how to make a fish trap themselves.

If you have the tools and the necessary materials, it will not be difficult to cope with this. In addition, a home craftsman will be able to save money, since the cost of such devices varies between 200-1000 rubles. Information about what a fish trap is and how to make one at home is contained in the article.

Acquaintance

Fish traps are special technical devices that may differ from each other in design and materials used. One principle unites these devices: it is easy to get into them, but it is difficult to get out of there. Traps work with the expectation of poor eyesight of fish. Looking for a way out, she first panics and knocks on the walls. Then the fish freezes and falls into "hibernation". In this state, she gets to the fisherman.

About materials

For the manufacture of fish traps, network nylon fibers are mainly used. Judging by the numerous reviews, good products are obtained from sea seines. Simple materials are suitable for making fish traps. Home craftsmen make excellent devices from branches and plastic bottles. Each design has strengths and weaknesses, the effectiveness of fishing depends on this.

About virtues

According to experts, the use of fish traps has a positive effect on the amount of catch. In addition, with these devices you can work anywhere in the reservoir, even in very snarled and overgrown areas. The main advantage of branded and homemade fish traps is their ability to keep the catch alive for a long time. This nuance is important, because anglers do not always have the opportunity to check gear on time. When using nets, fish often die and decompose.

What is the downside?

Judging by the numerous reviews, fishing with traps requires minimal human intervention. Given that for most fishermen the process itself is important, and not the result, the use of such devices does not bring the desired pleasure. According to experienced fishermen, with traps you can’t get that boost of energy and positive energy, as with other gear.

Kinds

Today, fishing tackle is presented in a wide range. Depending on the design features, conditions of use, material used and type of extraction are distinguished:

Traps for fish from a bottle. They are considered the simplest and most common.
Screen traps.
Stationary.

Anyone who decides to make a fish trap with their own hands can use one of the above options for their product.

About Stationary Fishing Attachment

The product in the form of a mesh box is intended for catching large individuals. To make such a homemade fish trap, you will need:

Wooden or plastic slats. They are needed to create a frame. You can also use two children's plastic hoops, which will become the basis for a round box.
Plumbing plastic pipes. They must be straight. You can also use PVC products. Tubes are needed to hold the walls of the box.
Aluminum profile.
Fine mesh plastic net. You can use garden nylon mesh. It is desirable that the cell diameter does not exceed 10 mm.

First, you need to make a box from an aluminum profile and wooden bars, which is then covered with a mesh. Care must be taken to ensure that no gaps are formed. The entrance and exit to the trap is made in the form of a funnel. They are arranged on opposite sides so that their narrow ends are facing each other. Inside the trap, they put a jar with fry, which makes a knock on the walls of the container, which attracts the perch. This design is considered quite catchy also with the use of other baits. It all depends on what kind of fish you plan to catch. In addition to fry, traps are equipped with various baits and plant components. Stationary devices can also be operated in winter period.

About devices from bottles. How to do?

In skillful hands, anything can be used to make a makeshift fish trap. Plastic bottles and bottles, judging by the reviews of anglers, are considered a good base for homemade products. The home master will need to acquire the following items:

bottle. Its volume can vary from 1 to 5 liters.
Sharp knife.
Shilom.
Rope or thin wire.
Wooden stick.

To start with a plastic container, you need to cut off the neck. Then it must be inserted upside down into the rest of the bottle. You should get a large funnel, which will be the entrance for the fish.

After that, with the help of an awl, holes are made in the edges of the vessel and the neck, through which a rope or wire is passed. You can also use a line. Funnel and plastic container are firmly sewn together. The ends of the fishing line should not be cut, because the rope will have to be untied to remove the neck. The ends will not interfere if they are tied in a loop. In order for water to quickly penetrate into a plastic container, it is recommended to make several holes in the walls of the trap. A wire must be attached to the bottom of the bottle, the second end of which will be connected to a wooden stick. It will provide reliable fixation of the fishing device at the bottom of the reservoir. In inner part bottles put bait and some small lead weights.

Fishermen lure mainly with fry, chopped worm or bread crumbs. Judging by the reviews, minnows, roach and perch are most often caught in such devices.

About flat screen traps

The home master will need a mesh and wire. You can also use fittings. This type of trap is presented in the form of a wall with corners fixed with a fishing line. You can make such a homemade product as follows:

Attach the net and fishing line to the wire. The entire structure must be vertical. It is desirable that the fishing line is strong, since it will have to hold a lot of weight. It is recommended to use two networks: fine-meshed and with larger holes.
Place a small box of food in the center of the trap. Experienced anglers recommend making several holes in it. This will ensure that the food is washed out gradually and the fish are attracted. To catch a large individual, the device must be installed at great depths.

About an unusual fishing device

The designs of such traps are very different. The master will have to use his imagination. Judging by the reviews, good home-made devices are obtained from an ordinary pot or bowl and gauze. You can make a trap like this:

Attach the gauze to the container.
Make a small hole in the center of the trap.
The bait is placed in the container: bread crumbs, cereals, grasshoppers.

According to experienced fishermen, by lowering the trap into the water and sprinkling it with silt, after half an hour you can extract a good catch from it. Before removing the device from the water, you need to plug the central hole. Conventional jars with plastic lids work according to this principle.

About the Chinese fish trap

According to experts, an original method has been invented in Asian countries, which is as follows: a small depression is dug on the shore, into which bamboo tubes are launched. One end of the tube is located in a pond with fish, and the other end is in a recess. It is fixed with bricks. In this case, fishing is based on its curiosity. Once in the tube, it begins to move forward until it is in a special recess. From there it is extracted by fishermen.

"Katishka"

The trap is made from a wire rectangular frame. The frame is covered with fine mesh. To make the fixture stable, the sides are attached using additional wire jumpers. After that, the entire structure is folded in such a way that there is a small passage between the ends.

The upper and lower parts of the trap are covered with a mesh. This fishing device is designed more for overgrown channels and ponds with a small current. Since the fish mostly swims against the current, it is recommended to install the Katiska with a passage to the current.

"Muzzle"

The design of this trap for catching fish is presented in the form of two cones. One of them is larger and is used as a body. The second, which is smaller, serves as an entrance. To make a trap, you will need willow twigs. To give them flexibility before weaving, the rods are dipped in warm water for several hours. Begin manufacturing by weaving a large cone.

It can be made from thirty or forty of the thickest rods. Masters collect them in one bundle and tie them. Then thinner rods are woven into them. The product is given a conical shape. This method is used to make a cone-entrance. It differs from a large one in that its design must necessarily have a hole through which the fish will penetrate into the trap. A bait and several sinkers are placed in the device. The "muzzle" is installed with a small cone towards the flow. This device is also often used to catch crayfish.