How to use apple watch in water. How water resistant is Apple Watch and how to properly use the Water Drop mode

Water resistance is one of the main criteria when choosing a watch. Many mistakenly believe that all Apple Watch waterproof, but it's not. Shallow diving is limited to Apple Watch Series 4, 3, and 2, while the first generation and Series 1 models are only water and splash resistant.

Waterproof vs Water Resistant: What's the difference?

As you can see, there is a difference between water resistance and water resistance (water resistance). In the case of the Apple Watch Series 1, the device is water resistant, but by no means waterproof. This means you can wear your favorite gadget in any weather, wash your hands and play sports without worrying about sweat droplets damaging your watch. However, diving with them into the water is not recommended.

Can I swim or shower with Apple Watch Series 4, 3, and Series 2?

Apple Watch Series 4, 3, and 2 can be worn while swimming in the pool and swimming in the sea (you need to turn on the special “Water Lock” mode, more on this below), but for diving and other water sports that involve diving to great depths or exposure to water at high speed, they are not suitable. While showering, this watch can be left on, but contact with shampoo, soap, body and hair care products, and perfumes is undesirable, as they can damage the waterproof partitions and acoustic membranes. If any substance other than water comes into contact with the watch, wipe it with a clean, lint-free cloth lightly dampened with water, and then wipe dry.

Please note that water resistance is not permanent and may change. It depends on a number of factors, including whether your gadget has been dropped, exposed to detergents or cosmetics, acids, acidic foods, or hair dye. In addition, water resistance may be reduced if you wear your Apple Watch in a bath or sauna or engage in extreme activities. water sports sports. Also keep in mind that not all straps are water resistant. For example, leather and steel bracelets are best kept away from water.

Can I swim or shower with Apple Watch Series 1?

No. As mentioned above, the Apple Watch Series 1 is water resistant (water and splash resistant), but not waterproof.

What to do if your Apple Watch gets water?

If your watch gets wet, wipe it dry with a clean, lint-free cloth. Do not put them on the battery or next to other heat sources, dry with a hair dryer or sprayers.

After a workout at the gym, wipe sweat off your watch and band, and clean the wrist where you wear the watch. Apple Watch Series 2 and 3 models can be washed with warm tap water. After cleaning, always dry the device thoroughly with a clean, lint-free cloth.

After water enters the speaker hole, the sound may become muffled, but you should not try to insert something into it to clean it. Shake the gadget is also not necessary. Just leave it charging until the morning to let the moisture evaporate. The same applies to the barometric altimeter, which can become less accurate if water enters the ventilation device.

Apple Watch Series 1

You can check if water has entered the microphone or speaker of your Apple Watch Series 1 as follows. Lay the watch on a lint-free cloth with the speaker facing down and see if any liquid comes out. Until the water evaporates completely, it may interfere with the performance of the speakers and microphone.

Apple Watch Series 4, 3 and 2

Before diving into water with Apple Watch Series 4, 3, and 2, you must activate Water Lockout mode. In this mode, screen taps, buttons, and the Digital Crown will be disabled.

How to Enable Water Lock on Apple Watch: 2 Ways

1. You can activate the Pool workout on your Apple Watch.

In this case, the watch will enter the "Water Lock" mode and automatically lock the screen to prevent accidental taps on it.

2. If you don't want to start exercising, you can turn on the Water Lock function manually. To do this, swipe up on the screen to go to Control Center and tap on the water drop icon.

How to turn off Water Lock on Apple Watch and push water out

When you're done swimming, quickly turn the Digital Crown a few times to unlock the screen and remove water from your Apple Watch.

What else you need to know about Apple Watch contact with liquids

Pool water contains chemicals that can damage Apple Watch components. In addition, contact with salt sea ​​water can accelerate the corrosion of the watch, so proper care is required for the device. After your swim session, gently rinse your Apple Watch with clean water.

It should be noted that Apple strongly advises against exposing the smartwatch to soap or soapy water, shampoo, perfume, insect repellent, sunscreen, lotion, or other chemicals that contain chemicals, as they can damage the waterproof baffles and acoustic membranes.

According to yablyk

This is a great assistant that monitors the health of the owner. Due to its specification, the watch can be submerged in water. But each model has its own international water resistance standards, which limit the device's contact with liquid. When using a smart watch, you need to know and apply precautions that will save the device.

How to start a water workout with iWatch?

Swimming is a great sport that allows you to constantly keep an athlete in good shape. physical form. Apple took care of training in the water and released waterproof watch. During water procedures Apple Watch will show the whole picture of the owner's health.

How to set swim training mode on Apple Watch?

  1. You need to enter the "Training" menu.
  2. Next, you should select the item "Swimming in the pool" or "Swimming in the open water" (the choice depends on the location of the training).
  3. After manipulation, the device will automatically switch the watch to the "Water Block" mode.

After completing these steps, the user can safely dive into the water. After the training time is over, you should unlock the watch. This is done as follows: you need to hold down the Digital Crown and the button on the side of the device.

How to turn on Apple Watch Water Lock by yourself?

  1. You should go to the "Management" menu.
  2. Next, you need to select the icon in the form of a drop.
  3. You should click on the icon and select the "Water Block" mode.


This operation should be done before taking a shower, bath, before going outside in the rain.

Cons of using iWatch underwater

  1. Since the watch is locked, the underwater screen is inactive, although all available symbols are clearly visible. Therefore, you will not be able to use the functions of the device while swimming.
  2. It is important to remember that water has a high electrical conductivity: if the lock is not turned on before water procedures, the watch may break. It is also important to remove liquid drops after swimming.

How to view the workout report?

After swimming, many users compare their results with previous activities. To follow the improvement process, first you need to unlock the device and in the "Training" menu, click "End".

In the water training mode, the duration of activity and rest is automatically noted. The owner can view the activity report on the iPhone in the Apple Watch app. The watch will show not only the total distance that the user has swum, but also calculate what style the person used during classes. The report will also display the pace at which the athlete did the heats.

How to clean Apple Watch from moisture?

There are impurities in any water (in the sea - salt, trace elements, in the pool - chlorine, in the bath - personal hygiene products) that need to be cleaned Apple Watch. For this you need:

  1. Touch the bottom of the display, hold your finger a little, then swipe up. The Manage menu opens.
  2. Here again, you need to touch the "Drops".
  3. Then you should scroll the Digital Crown several times. This action will unlock the watch and remove excess fluid from the speakers.

But before the first use, you must carefully read the instructions for using the watch in water. Before releasing the lock after swimming, make sure that the watch and its movements are dry.

What are the restrictions on using different versions of Apple Watch in water?

  • The Apple Watch Series 1 is not designed to be exposed to liquid for extended periods of time. In the manufacture of this series, manufacturers have used the IEC 60529 liquid protection standard and the IPX7 classification. This suggests that prolonged exposure to liquid on the watch will adversely affect the device. You can walk in the rain in them, even take a shower. But at the same time, it is necessary to ensure that the watch does not come into contact with water for more than a few seconds. Do not submerge them in water more than 1 meter.


  • Apple Watch 2 , and series are made to a different standard (ISO 22810:2010). The device can be immersed in water for a long time. But there are restrictions on the depth to which an athlete can descend. Apple Watch can dive into a body of water at least 50 meters. In other words, the user will not be able to dive in the watch.


Water resistance of different models of Apple Watch 1

Many users ask the question: Are the Apple Watch, Apple Watch Edition and Apple Watch Sport waterproof? The developers make it clear that 1st generation watches are not waterproof. Although the IEC 60529 IPX7 standard provides for a short stay of the device in water. However, the company warns device owners not to let the watch come into contact with liquid.

According to some reports, Craig Hockenbury (Apple software engineer) and Tim Cook (Apple CEO) at one time took a shower and bathed in the Apple Watch. They assured that the watch works fine after water procedures. It is difficult to judge how true these assurances are.

Therefore, in order to avoid unpleasant incidents, you should not swim in iWatch. To keep your Apple Watch waterproof for a long time, you should follow some simple rules for using and storing the device.

What can not be done on the Apple Watch?

  1. Drop or subject the watch to mechanical stress.
  2. Do not allow the watch to come into contact with hygiene products (soaps, shampoos, gels), perfumes, acids, solvents, oil products (gasoline, diesel fuel), dyes.
  3. Contact with drops of water at high speed (water skiing, rides) is not allowed!
  4. Avoid exposure to high temperatures (sauna, bath).
  5. Avoid exposure to low temperatures. Use temperature from 0 to 35 degrees Celsius.

It is important to remember that leather and metal watch bands are not waterproof!

How to properly care for your Apple Watch?

  1. You should regularly clean and wipe the watch from sweat. The human skin needs to be kept dry.
  2. Before the Water Lock function is activated, the watch may be damaged by contact with liquid.
  3. After each workout, you should wipe the watch itself and the bracelet with a non-aromatic cloth that absorbs moisture.
  4. After swimming in open water or in a pool, it is recommended to rinse the device with clean water.
  5. When caring for or drying the watch, do not use a hair dryer, heater, treat the gadget with chemicals, compressed air or ultrasonic devices.
  6. It is strictly forbidden to clean the Apple Watch while charging!

Craig Hockenberry lives in California, builds apps and websites, surfs and often swims in the ocean. He also wears an Apple Watch for several months and does not take it off even while swimming. Smart watches are still alive.

Craig shared his experience of using the Apple Watch in salt water as an activity tracker, and the experience turned out to be quite interesting. At a minimum, it proves that Apple has made a pretty strong smart watch with which you can not only wash your hands or take a shower, but also swim in the pool and in the sea. And now let's talk about everything in order.

Water specifications

Before starting to actively use the Apple Watch during their water activities, the enthusiast decided to study the specification IPX7, which corresponds to the device. Apple claims that smartwatches are not recommended to be submerged under water, and leather straps are basically not waterproof. In this case, the company is only partly right. Leather things really deteriorate quickly from water and you will have to change the strap almost every month if you swim with it. So physically active citizens should stop their choice on silicone models. But as for IPX7, the situation is somewhat different.

According to this specification, the gadget can be immersed to a depth of up to a meter for half an hour, and it must withstand such a test without negative consequences. Since the Apple Watch complies with IPX7, it means that the watch was tested in such, or even more severe conditions. Thus, according to the specification, you can safely immerse the accessory under water, and swim in the pool, in theory, too.

By the way, triathlete Ray Maker checked it all out. Moreover, he did not limit himself to only a half-hour swim, but also dived in the watch from the tower and even tested it with water pressure, simulating a dive to 40 meters. The clock survived, and to this day pleases the owner with uninterrupted operation.

In this case, Apple decided it was better to be "overdone" than "underdone", despite the negative response from people when they learned that the company does not recommend submerging the watch in water, let alone swimming with it. And this is the right decision. It is more pleasant to know that your gadget can do a little more than to be disappointed after the manufacturer's loud advertising statements.

Potential water issues

Now let's talk about water. By itself, it is an insulator and does not conduct electricity. That is, dip in 100% pure, distilled water any electronic gadget, and nothing will happen to him - he will continue to work as if nothing had happened. The problem is that ordinary tap water, and any other in an open environment, be it a pool or the sea, contains a lot of trace elements that are very good conductors. Under the influence of the same sodium chloride (ordinary salt), real electrochemical reactions take place.

If we simplify the picture as much as possible, then ordinary water can be perceived as millions of microscopic wires and contacts that easily conduct electricity and “fry” any electronics they touch. The amount of material in water that can conduct electricity is related to general mineralization(also known as " total dissolved particles "- Total Dissolved Solids, TDS). In turn, the unit of measurement of electrical conductivity is Siemens per meter(S/m).

Thus, the number of soluble particles in deionized water is very small - approximately 5.5µS/m. Drinking water is from 1000 to 10000 times more conductive with an indicator of 5–50 mS/m. Ocean water has a conductivity one million times higher than deionized water ( 5S/m). And chlorinated pool water has a much higher conductivity than regular tap water.

Let's draw a line. All of the above means only that any water in our lives conducts electricity, and this has serious consequences for the Apple Watch.

Untouchables

iOS devices use a capacitive touchpad that uses our body as a conductor. Due to a weak electrostatic field, the display reacts to current leakage when touched, and technical magic is created on the screen - lists scroll, buttons are pressed, menus change each other. But as soon as we surround the display and our body with a conductive liquid, the sensor will literally go crazy, perceiving it as a touch simultaneously over the entire surface.

Thus, the capacitive touch panel can only adequately respond to your touch in distilled water.

You can easily check this effect yourself - throw the watch into a glass of water and try to enter the unlock code:

In addition to the touch panel, the function does not work, which is blocked by software when registering a normal touch. So, no matter how hard you press on the glass, the vibration motor will not work. How much all this interferes with reality, we will discuss a little later, but for now let's think a little more about water.

When rubber meets liquid

Electrochemical processes in water that cause electrical conductivity are also responsible for corrosion. Everyone who has spent some time by the sea or the ocean knows very well that after contact with a salty liquid, things need to be washed with fresh water. This is especially true for divers. If you do not bother with washing, then salt and other minerals remaining on the surface of the thing after the liquid has evaporated will quickly lead to damage to the equipment.

Accordingly, the question is - how does the Apple Watch perceive such a scheme of operation? Please note that in this case we are talking only about the aluminum Sport model. Other variants use different materials both in the case (steel) and to protect the display (sapphire). They may also react differently to water. I suppose that physically active citizens who are interested in using watches in water and other extreme conditions will still make a choice in favor - because they are also cheaper.

Metal

The watch case is made of anodized aluminum. The anodizing process creates a thin protective layer (2–3 nm) on the surface. It is not a conductor and provides good protection from electricity and corrosion. In particular, the multimeter showed a resistance of 6 MΩ between the speaker and microphone ports.

In addition, this layer is a good protection against scratches. For several months of very active use, the body of the gadget remained pristine.

Glass

The display is covered with very strong glass Ion-X. Exactly the same material is used in the windows of space shuttles and the windows of high-speed trains.

In addition, glass is a good insulator. In high-voltage towers, it is glass and ceramics that are installed to prevent current leakage into the ground.

Rubber

Apple smartwatches are made of more than just aluminum and glass. Between these materials there are, albeit minimal, but still gaps that must be isolated to comply with the IPX7 specification. It was there that it found its application. rubber.

Unfortunately, Apple does not tell us anything about this important material. There is no information even about whether there is natural rubber or artificial. All that is known is only the presence of this material in critical places of the structure.

So, the sealing layer was found on the side button, in the plug and in the electronic crown.

It may seem that it is rubber that will be the weak point for corrosion, especially in salt water, but according to a US Navy study, this is not the case. They studied the reaction of natural rubber in the design of torpedoes to sea air and salt water. The output is the following:

It takes a very long time to seriously degrade rubber properties.

Any diver will assure you that rubber has no problems with salt water if you follow a simple rule...

Cleaning

Do not forget to rinse your watch with fresh water after each contact with salt water. The same goes for a pool of chlorinated water, as well as profuse sweating after an intense workout.

It’s not worth it to especially strain with washing the watch - drain some clean water from a bottle on them or substitute it under the tap for a couple of seconds. If after a workout you go to the shower, then just do not take off your watch, but raise your hands up and let the water flow calmly between your wrist and gadget.

The only nuance that Craig drew attention to was the crown, which did not rotate very smoothly immediately after swimming in the ocean. Probably the problem is salt getting between the body and the metal head. After washing, the smoothness of rotation returned.

If you have been in water with your Apple Watch, be it a pool, sea, river, lake, etc., be sure to rinse them afterwards!

P.S. Music in the clock

You can also use the Apple Watch as a music player, although, given the topic of this article, underwater listening will require waterproof wireless headphones. But the phone is not needed, as smart watches have an impressive amount of memory for storing music. Enough for a downhole training playlist.

In turn, there is already a good solution for running that can work with the Apple Watch. It's called.

These are quality Bluetooth headphones designed to withstand the rigors of even the toughest workouts, fit well in your ears and have their own sports tracker. TRACKFIT, capable of measuring distance, pace, calories burned even when the Apple Watch is already running out of power.

In addition, they delight with excellent sound - juicy, assertive, deep bass. Just the way it should be for a mighty Mouzon, forcing you to work even, it would seem, beyond your physical capabilities.

There is protection from sweat and rain. Headphones sync with dedicated Jabra app Sport life, which offers entire training programs and monitors their implementation. A complete sports gadget that plays music perfectly. In general, you will find out about everything yourself ( 4.50 out of 5 rated: 2 )

website Craig Hockenberry lives in California, builds apps and websites, surfs and often swims in the ocean. He also wears an Apple Watch for several months and does not take it off even while swimming. Smart watches are still alive. Craig shared his experience of using the Apple Watch in salt water as an activity tracker, and the experience turned out to be...

Welcome experienced surfer. You came here to find out one thing: is any of the Apple Watch line waterproof. Well, the short answer is no... but that doesn't mean you can't get wet, shower or swim.

The reason for such a sharp (and confusing) answer is terminology: there is practically no electronics on the market that would be "waterproof". This means they are completely impervious to water, a dangerous requirement for any manufacturer.

Being "water resistant" means they can survive in certain conditions when dealing with a deadly aquatic enemy. Not even a submarine fully waterproof because at some depths the water pressure can cause it to collapse unless it is incredibly advanced.

Image courtesy of Apple

You are not buying a submarine, but smart watch that can do anything and you just want to know how much water it can take. The good news is that the entire Apple Watch line is waterproof - it just varies by how much.

Any waterproof electronics won't always stay that way, which is why brands try so desperately not to think about what can be done to their devices in a wet environment.

Over time, water-tight seals can deteriorate or become damaged, making the whole process quite difficult to navigate. Here's what Apple says you should avoid using the watch to make it more water resistant:

  • Dropping your Apple Watch or otherwise exposing it.
  • Exposure of Apple Watch to soap or soapy water, such as while showering or bathing.
  • Exposure of Apple Watch to perfumes, solvents, detergents, acids or acidic products, insect repellents, lotions, sunscreen, oils, or hair dye.
  • Exposure of Apple Watch to high-speed water, such as while water skiing.
  • Wearing an Apple Watch in a sauna or steam room.

The reason for this is that seals spend too much time on whatever is nibbling on them (be it steam, light corrosives, or droplets that can crack something).

This is unlikely to happen in reality, but this is the sort of guidance that brands should offer to make sure users understand the difference between being completely water tight and being able to resist it somewhat - and that will void the warranty if you've done any of the this.

Is the Apple Watch Series 1 waterproof?

Have you ever imagined Tim Cook, CEO of Apple, in the shower? Now you have. And you know he has a great bathroom. Probably one of those rain nozzles... and we bet it has perfect water pressure too.

Imagine being in his guest bedroom. The quality of the towels would be… anyway, we lost our way. The first Apple Watch is not waterproof and is the least water resistant of the entire line.

Apple had a hard time saying that this watch isn't water-resistant at launch, but by chance it protects more smoothly than we expected.

We started to get suspicious when Cook mentioned using it in the shower (hence the opening paragraph to this section - though we hope he didn't get too soapy with it), and it turns out there's some sort of safeguard.

It's IPX7 rated, which means you can submerge it up to a meter in half an hour - sounds good for swimming, right?

Wrong. It would probably be fine if you tied him to a rope and let him get behind you in a very shallow pool, but the problem comes when you slap him savagely through the water while trying to remember how front bypass works from your school days. This puts too much pressure on the seals and may allow water to enter.

Remember: electronics and water are not friends. That's why all this hu-ha exists.

(However, DC Rainmaker, a renowned fitness gadget tester, found that the Apple Watch 1 was much more water resistant than Apple claimed - you can see it happening here).

Today's Best Apple Watch Series 1 Deals

300 Amazon customer reviews ☆☆☆☆☆ $179View price $299.99 $228See More OffersWe check over 130 million products daily for the best prices.

You can also invest in case you're worried - however, they're not super cheap like this one from Catalyst (although it's strange that IP68 is rated up to 100m depth, when 8 usually means 1.5m underwater).

So... is the Apple Watch 3 waterproof?

Image courtesy of TechRadar

Still no. Haven't you read the first section on what water resistance means? But, the good news is, you can swim with the Apple Watch 3 thanks to 5ATM security.

(You've probably noticed that we missed the Apple Watch 2 - it's no longer on sale, but it has the same protection as the Watch 3. Imagine they're the same and you're gold).

This is the standard water resistance you see on most watches - which basically means you're good down to 50 meters. You really can't go scuba diving with an Apple Watch, but for most things (including, well, shallow snorkeling), it'll be fine.

It should be noted here that water resistance is higher here, so the Apple Watch 3 can withstand more strong blows— which does include swimming and longer exposure to water.

That doesn't mean you can do something weird with soap all of a sudden and still expect a warranty, but the Watch 3 is more capable than the first iteration and won't fall apart at the first sign of rain.

Apple marketed the Watch 3 (and Watch 2) as great for swimming, and added a cool little feature to it that allows the watch to make a buzzing sound to get water out of the speaker. It's fun to watch.

Today's Best Apple Watch Series 3 Deals

?$219.89View end of Friday March 1st $429See More OffersWe check over 130 million products daily for the best prices

Is the Apple Watch 4 waterproof?

Image courtesy of TechRadar

It would be weird if it wasn't, right? Well, it's not waterproof. We deceived you. None of them are waterproof.

But the Apple Watch 4 is water-resistant to 5ATM, just like the Watch 3. There's no more protection than before, but it would be a strange addition from Apple to make it less water-resistant.

It's the larger screen on the Watch 4 that lets you see what's going on underwater (if the app you're using allows it).

Today's Best Apple Watch 4 Deals

232 Amazon customer reviews ☆☆☆☆☆ Special Price $399 $384.99View $399See More OffersWe check over 130 million products daily for the best prices

  • Which Apple Watch should you buy?

Hi all!

When I bought my iPhone 7 32 GB Jet Black, when I first set it up, I wanted to immediately delete the Watch app as unnecessary. Then I decided that this is the gadget that I will definitely never buy. But everything changes in this life. And today my story is about my favorite watch - Apple Watch Series 3. I have the 38mm version in Rose Gold.

I bought them together with Apple AirPods, they work great in conjunction and complement each other.

watch Packed in a beautiful box, large enough


Inside it lies an envelope with documents


Also included is another longer strap for a larger hand.


The watch in the box is assembled, with a strap attached. Upon purchase, they are fully packaged in films. I have already photographed them.

Disassembled it looks like this


The watch itself

And the reverse side of the watch, on which 2 oval buttons are visible, located above and below, through which the straps are attached

The first time you turned on your Apple Watch, it asked you to sync with your iPhone. After a while, they reported that the operation was successful and they were ready to go. Then they can be customized to your needs using the iPhone. To do this, you need to enter the Watch application and go through four tabs.

The first tab is My Watch. Here are all the settings that I changed for myself.

At the very bottom there is a list of programs installed on the watch and programs available for installation.

The second tab is watch faces. Here is where to roam. There are no dials here. And each of them can be customized to your liking.

You can also create watch faces yourself. I have made only one so far with my beloved dog Jessica

I really liked the dial with Minnie Mouse. She knows how to tell the time by voice and wish a good time of the day. This feature is very useful in low light conditions.

I also liked the Earth dial. It marked with a red dot the place of my stay on the planet.

And this dial is a kaleidoscope with many settings. Very beautiful dial and the image is constantly changing.


Every time I put the watch on my wrist, it asks for a password.


The third tab is the App Store. Here you can see the applications available for the watch and install them on your phone. Then they will appear on the clock.

And the last bookmark is search. I think everything is clear here.

The apps installed on my watch help me keep my phone out of my bag once again, or even throw it somewhere and get by for hours. If a message arrives on the phone or on Viber, then I can read it perfectly on the watch and even answer.

If someone calls me on the phone, then I take the call on the watch and talk through the AirPods speakers. No one has yet complained that they can't hear me well. And I also hear the interlocutor remarkably. Agree, it's quite convenient.Especially if my hands are busy or I go by public transport.

In addition to receiving calls, I can also call or write a message from the watch myself.

It is convenient to check e-mail from the watch. Rather, messages are displayed on the watch screen on their own when they arrive in the mail, which allows you to quickly respond to important messages.

More apps I use on my watch:

Shazam

Weather

Tasks

Bluetooth

Radio

Reminders


The alarm clock helps you wake up comfortably. It feels like someone is gently touching your hand.

Music. It is very convenient to adjust the sound in the headphones by rotating the Digital Crown, as well as switch between tracks.


All applications are collected on one screen. Their display can be changed depending on personal preferences.


Very much attention is paid to the stimulation of physical activity in the watch.


They constantly talk to me and make me get up and move around for at least one minute. Since my work is sedentary and my lifestyle is sedentary, this factor is very important for me.


The watch makes sure that I don't forget to spend the accumulated calories


I do this on my way to and from work.


The watch includes a heart rate measurement function and, when a critical point is reached, it signals this. In the settings, you can set how many steps you want to take during the day and the watch will count them. When I go up the stairs, the clock counts the flights I have passed. By the way, according to them, I often sleep on the floor below, although I don’t even know anyone on the site from the 4th floor (I live on the 5th).

From one charge, the clock works for me for 2.5 days. This is not much, of course, and I would like at least a week, but as it is. When the watch runs low on power, it goes into power saving mode and displays only the time on a dark background. At this time, nothing can be done with them.

The watch strap is silicone, pleasant to the touch. Since I have it in a pale pink color, it gets dirty, but not critical. I've only washed it once in over a month. Since the original Apple straps are very expensive, I ordered one silicone and one Milanese loop on Aliexpress. Still waiting for them to come, I will add a review and share my impressions.

The watch was purchased in one of the Jingle stores in my city for 22,900 rubles with a discount of 1,500 rubles for previous purchases. Also received a discount of 1000 rubles for the next purchase.

During the time of using the watch, I already managed to fall in love with them. Very helpful in the city when you need to make or receive a call. Yes, and at work you can talk without being very distracted from the process. Of course, subject to use with AppleAirPods. Otherwise, everyone around will be aware of your conversations in every detail.

The clock has its own memory and you can download music into it. Therefore, even if the phone is not around, I can still enjoy listening to my favorite songs. It is convenient when I go for a walk.

Another advantage of the Apple Watch is water resistance. The manufacturer promises that they can swim in fresh water and take a shower. I have not used them in this way yet, but when washing my hands, there is often some contact with water.

In conclusion, I want to say that I really liked the watch. After buying them, I never part with them for a single day. For me, they have become a convenient accessory that simplifies my life.

All good and good mood!!!